I.S. EN 12516-4:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
Hardcopy , PDF
22-01-2020
26-11-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Symbols and units
4 Interrelation of thickness definitions
5 Requirements
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC
Bibliography
This European Standard specifies the calculation method for valve shells manufactured in metallic materials other than steel.
Committee |
TC 69
|
DocumentType |
Standard
|
Pages |
24
|
ProductNote |
NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS TO EN 485-2,EN 12449,EN 1503-4
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 12516-4:2014 | Identical |
EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
EN 12167:1998 | Copper and copper alloys - Profiles and rectangular bar for general purposes |
EN 1503-4:2016 | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
EN 12168:1998 | Copper and copper alloys - Hollow rod for free machining purposes |
EN 1412:2016 | Copper and copper alloys - European numbering system |
EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
EN 13445-6 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
EN 1093-3:2006+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
EN 755-2:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
EN 1982:2008 | Copper and copper alloys - Ingots and castings |
ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
EN 13445-8:2014 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
EN 1562:2012 | Founding - Malleable cast irons |
EN 12164:2011 | Copper and copper alloys - Rod for free machining purposes |
EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
EN 13445-6:2014 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
EN 13445-8 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
EN 1092-4:2002 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
EN 12163:1998 | Copper and copper alloys - Rod for general purposes |
EN 1563:2011 | Founding - Spheroidal graphite cast irons |
EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
EN 12165:1998 | Copper and copper alloys - Wrought and unwrought forging stock |
EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
EN 1412:1995 | Copper and copper alloys - European numbering system |
EN 12420:2014 | Copper and copper alloys - Forgings |
EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
CEN/TS 13388:2008 | Copper and copper alloys - Compendium of compositions and products |
EN 12165:2016 | Copper and copper alloys - Wrought and unwrought forging stock |
EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
EN 1982:2017 | Copper and copper alloys - Ingots and castings |
EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
EN 1561:2011 | Founding - Grey cast irons |
EN 754-2:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.