I.S. EN 12999:2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
CRANES - LOADER CRANES
Hardcopy , PDF
30-04-2021
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and terminology
4 List of significant hazards
5 Safety requirements and/or safety measures
6 Verification of the safety requirements
and/or measures
7 Information for use
Annex A (informative) - Examples of configurations
and mountings
Annex B (informative) - Stress history parameter s
and stress history classes S
Annex C (informative) - Explanatory notes
Annex D (informative) - Examples of dangerous
movements
Annex E (normative) - Symbols for working and
setting-up functions
Annex F (informative) - Control system - Preferred
vertical layout for controls operated from
the ground
Annex G (informative) Control system - Horizontal
layout order
Annex H (informative) - Control levers for high seats
and remote controls
Annex I (not used)
Annex J (normative) - Cabins fitted on vehicle mounted
loader cranes up to a net lifting moment of 250 kNm
Annex K (informative) - Examples of raised
control stations
Annex L (normative) - Raised control stations - Measures
regarding hand rails and hand holds, ladders
and steps
Annex M (informative) - Installation of a loader
crane on a vehicle
Annex N (informative) - Selection of a suitable set of
crane standards for a given application
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
Describes minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations.
| DevelopmentNote |
2011 Edition Re-Issued in February 2018 & incorporates AMD 2 2018 (04/2018)
|
| DocumentType |
Standard
|
| Pages |
100
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 12999 : 2011 | Identical |
| SN EN 12999 : 2011 + A1 2012 | Identical |
| UNE-EN 12999:2011 | Identical |
| EN 12999:2011+A2:2018 | Identical |
| NBN EN 12999 : 2011 + A1 2012 | Identical |
| DIN EN 12999:2013-02 | Identical |
| UNI EN 12999 : 2012 | Identical |
| ONORM EN 12999 : 2013 | Identical |
| NF EN 12999 : 2011 + A2 2018 | Identical |
| NS EN 12999 : 2011 + A2 2018 | Identical |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 13586:2004+A1:2008 | Cranes - Access |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN ISO 5353:1998 | Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| DIN 15400:1990-06 | LIFTING HOOKS - MATERIALS, MECHANICAL PROPERTIES, LIFTING CAPACITY AND STRESSES |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| DIN 15401-2:1983-09 | LIFTING HOOKS FOR LIFTING APPLIANCES - SINGLE HOOKS - FINISHED PARTS WITH THREADED SHANK |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.