I.S. EN 1360:2013
Current
The latest, up-to-date edition.
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Pressure requirements
7 Dimensions and tolerances
8 Physical properties
9 End fittings
10 Type tests
11 Frequency of testing
12 Marking
Annex A (normative) - Test method for determination
of low temperature resistance at -30 degrees C
(for normal temperature class) and -40 degrees C
(for low temperature class)
Annex B (normative) - Method for the determination
of adhesion between components
Annex C (normative) - Test method for the determination
of low temperature flexibility
Annex D (normative) - Test method for the determination
of fuel permeation
Annex E (normative) - Test method for flammability
Annex F (normative) - End-fitting pull-off test
Annex G (normative) - Test method for the determination
of leakage (leak test)
Annex H (normative) - Test method for fatigue strength
under reversed bending stress (flex test)
Annex I (normative) - Test frequency for type tests and
routine tests
Annex J (informative) - Test frequency for production
acceptance tests
Bibliography
Describes minimum requirements and test methods for verification for three types of hoses in two grades and two classes of hose assemblies used for measured fuel dispensing, including oxygenated fuels (up to a maximum of 15% oxygenated compounds).
DocumentType |
Standard
|
Pages |
31
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN 1360 : 2013 | Identical |
UNI EN 1360 : 2013 | Identical |
NBN EN 1360 : 2013 | Identical |
EN 1360:2013 | Identical |
NF EN 1360 : 2013 | Identical |
SN EN 1360:2013 | Identical |
NEN EN 1360 : 2013 | Identical |
UNE-EN 1360:2013 | Identical |
BS EN 1360:2013 | Identical |
EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
ISO 6801:1983 | Rubber or plastics hoses Determination of volumetric expansion |
ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
EN ISO 1307:2008 | Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006) |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
EN ISO 7326:2016 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
ISO 10619-1:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.