I.S. EN 13862:2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
FLOOR CUTTING-OFF MACHINES - SAFETY
Hardcopy , PDF
26-05-2009
English
11-12-2001
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 Mechanical hazards
5.2 Electrical hazards
5.3 Thermal hazards
5.4 Exhaust fumes (and gas)
5.5 Machines having a hydraulic power transmission
5.6 Fluid containers
5.7 Water supply and dust emission
5.8 Rotational speed
5.9 Noise
5.10 Maintenance
6 Verification of safety requirements and/or measures
7 Information for use
7.1 Marking
7.2 Accompanying documents
Annex A (normative) Noise test code - Grade 2 of accuracy
Annex B (normative) Dimensions of the flanges for cutting-off
diamond wheels
Annex C (normative) Strength of the guards - State of the art
concerning the characteristics of guards used with
cutting-off wheels
Annex D (normative) Pictograms
Annex E (normative) Verification of surface temperature
Annex F (normative) Vibration test code
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC, amended by 98/79/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Applies to pedestrian controlled floor sawing machines having power feed, manual feed or hand feed for sawing, grooving and milling floor surfaces made of concrete, asphalt and similar mineral building materials where the main power is supplied by electric or internal combustion prime engine. The power transmission of floor sawing machines is mechanical or hydraulic.
| DevelopmentNote |
Supersedes I.S. EN 500-5. (06/2007) 2002 Edition Re-Issued in May 2009 & incorporates AMD 1 2009. (06/2009)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 13862 : 2009 | Identical |
| UNE-EN 13862:2002 | Identical |
| BS EN 13862 : 2001 | Identical |
| NS EN 13862 : 2001 + A1 2009 | Identical |
| SN EN 13862 : 2001 + A1 2009 | Identical |
| EN 13862:2001+A1:2009 | Identical |
| NEN EN 13862 : 2004 + A1 2009 | Identical |
| DIN EN 13862:2010-03 | Identical |
| NBN EN 13862 : 2001 + A1 2009 | Identical |
| NF EN 13862 : 2002 + A1 2009 | Identical |
| ONORM EN 13862 : 2009 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| PREN ISO 3744 : DRAFT 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHOD IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 525:2013 | Bonded abrasive products General requirements |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 6104:2005 | Superabrasive products — Rotating grinding tools with diamond or cubic boron nitride — General survey, designation and multilingual nomenclature |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| IEC 61029-1:1990 | Safety of transportable motor-operated electric tools - Part 1: General requirements |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| ISO 16063-1:1998 | Methods for the calibration of vibration and shock transducers Part 1: Basic concepts |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 6395:2008 | Earth-moving machinery Determination of sound power level Dynamic test conditions |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN 60335-2-41:2003/A2:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 60335-2-41:2012 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.