Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 14439:2006

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    CRANES - SAFETY - TOWER CRANES

    Available format(s):  Hardcopy, PDF

    Withdrawn date:  17-07-2009

    Language(s):  English

    Published date:  07-02-2007

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 List of significant hazards
    5 Safety requirements and/or protective measures
      5.1 General
      5.2 Design requirements on the load bearing structure
      5.3 Design requirements for equipment
      5.4 Design requirements for health and safety
      5.5 Noise reduction
    6 Verification of the safety requirements and/or protective
      measures
      6.1 General
      6.2 Method of verification
      6.3 Fitness for purpose
      6.4 Noise measurement
    7 Information for use
      7.1 General
      7.2 Instructions handbook
      7.3 Marking
    Annex A (normative) Stability requirements
    Annex B (informative) Requirements for the provision of
            anti-collision on tower crane
    Annex C (normative) Outside indicators on the crane
    Annex D (normative) Verification of the safety requirements
            and/or protective measures
    Annex E (normative) Noise test code
    Annex F (normative) Climbing system
    Annex G (informative) Marking - Example of layout
    Annex H (informative) Selection of a suitable set of crane
            standards for a given application
    Annex ZA (informative) Relationship between this European
             Standard and the Essential Requirements of EU Directive
             98/37/EC
    Annex ZB (informative) Relationship between this European
             Standard and the Essential Requirements of EU Directive
             2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines safety requirements for tower cranes.

    General Product Information - (Show below) - (Hide below)

    Development Note 2006 Edition Re-issued in July 2009 & incorporates AMD 2 2009. (09/2009)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Withdrawn

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. 361:2013 CODE OF PRACTICE FOR THE SAFE USE OF TOWER CRANES AND SELF-ERECTING CRANES

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 13557:2003+A2:2008 Cranes - Controls and control stations
    ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    ISO 4306-1:2007 Cranes — Vocabulary — Part 1: General
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    ISO 4310:2009 Cranes — Test code and procedures
    ISO 7752-3:2013 Cranes — Control layout and characteristics — Part 3: Tower cranes
    1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
    EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
    ISO 13200:1995 Cranes Safety signs and hazard pictorials General principles
    IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
    EN 13586:2004+A1:2008 Cranes - Access
    EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
    EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
    EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
    EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
    EN 13001-2:2014 Crane safety - General design - Part 2: Load actions
    EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
    EN 954-1 : 1996 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    ISO 4306-3:2016 Cranes Vocabulary Part 3: Tower cranes
    ISO 8566-3:2010 Cranes Cabins and control stations Part 3: Tower cranes
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
    ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective