I.S. EN 1459:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS
Hardcopy , PDF
English
01-01-1999
01-10-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions - terminology
4 Hazards
5 Requirements and/or safety measures
6 Verification of requirements and safety measures
7 Information for use
Annex A (normative) - Industrial variable reach
truck - Stability tests
Annex B (normative) - Variable reach rough terrain
trucks - Stability tests
Annex C (normative) - Variable reach trucks handling
containers of length >= 6m, 20 feet-Additional
stability tests
Annex D (normative) - Trucks operating with offset
load - offset by powered devices
Annex E (normative) - Trucks operating with offset
load - offset determined by the utilisation
Annex F (informative) - Definitions of load handling
operations
Annex G (normative) - Procedure for testing steering
wheel kick back
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Pertains to self-propelled seated rider operated variable reach trucks intended to handle loads of all kinds using one of the attachments listed in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 - 3.20.
| DevelopmentNote |
1999 Edition Re-issued in February 2012 & incorporates AMD 3 2012. (03/2012)
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 1459:2012-06 | Identical |
| EN 1459:1998+A3:2012 | Identical |
| BS EN 1459 : 1999 | Identical |
| BS EN 1459 : 1999 | Equivalent |
| NBN EN 1459 : 1999 + A3 2012 | Identical |
| NEN EN 1459 : 1999 + A3 2012 | Identical |
| NF EN 1459 : 1999 + A3 2012 | Identical |
| NS EN 1459 : 1998 + A3 2012 | Identical |
| UNE-EN 1459:2000 | Identical |
| ISO 3449:2005 | Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
| ISO 13284:2003 | Fork-lift trucks — Fork-arm extensions and telescopic fork arms — Technical characteristics and strength requirements |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| ISO 3164:2013 | Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
| EN ISO 6683:2008 | Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
| PREN 15830 : DRAFT 2011 | ROUGH TERRAIN VARIABLE REACH TRUCKS - VISIBILITY - TEST METHODS AND VERIFICATION |
| ISO 6055:2004 | Industrial trucks — Overhead guards — Specification and testing |
| ISO 6683:2005 | Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 414 : 2000 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| EN ISO 5353:1998 | Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO 3287:1999 | Powered industrial trucks — Symbols for operator controls and other displays |
| ISO 5053:1987 | Powered industrial trucks — Terminology |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 668:2013 | Series 1 freight containers — Classification, dimensions and ratings |
| ISO 12100-2:2003 | Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles |
| EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration |
| ISO 6292:2008 | Powered industrial trucks and tractors — Brake performance and component strength |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 2330:2002 | Fork-lift trucks — Fork arms — Technical characteristics and testing |
| EN 281 : 1988 | SELF-PROPELLED INDUSTRIAL TRUCKS SIT-DOWN RIDER-CONTROLLED - RULES FOR THE CONSTRUCTION & LAYOUT OF PEDALS |
| EN 12053:2001+A1:2008 | Safety of industrial trucks - Test methods for measuring noise emissions |
| ISO 2867:2011 | Earth-moving machinery — Access systems |
| ISO 9533:2010 | Earth-moving machinery — Machine-mounted audible travel alarms and forward horns — Test methods and performance criteria |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 3874:2017 | Series 1 freight containers — Handling and securing |
| EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.