I.S. EN 15002:2015
Current
Current
The latest, up-to-date edition.
CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2015
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Terms and definitions
3 Equipment
4 Interferences and sources of error
5 Procedure
6 Report
Annex A (normative) - Guideline for choosing
sample treatment techniques
Annex B (informative) - Relationship between
minimum amount of (sub-)sample and particle
size
Annex C (informative) - Sample treatment equipment
Annex D (informative) - Examples for analytical
methods
Annex E (informative) - Examples for preparation of
test samples
Bibliography
Applies for the preparation of representative test portions from the laboratory sample that has been taken according to the sampling plan (EN 14899), prior to physical and/or chemical analysis (e.g. preparation of eluates, extractions, digestion and/or analytical determinations) of solid (including monolithic material) and liquid samples and sludge.
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 15002:2015 | Identical |
| UNI EN 15002 : 2006 | Identical |
| BS EN 15002:2015 | Identical |
| NS EN 15002 : 2006 | Identical |
| DIN EN 15002:2015-07 | Identical |
| NEN EN 15002 : 2015 | Identical |
| EN 15002:2015 | Identical |
| UNE-EN 15002:2015 | Identical |
| NBN EN 15002 : 2015 | Identical |
| NF EN 15002 : 2015 | Identical |
| EN ISO 22155:2016 | Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016) |
| CEN/TR 15310-2:2006 | Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques |
| ISO 5664:1984 | Water quality — Determination of ammonium — Distillation and titration method |
| ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| ISO 11074:2015 | Soil quality — Vocabulary |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| ISO 11083:1994 | Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| EN ISO 10523:2012 | Water quality - Determination of pH (ISO 10523:2008) |
| EN ISO 12846:2012 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| EN ISO 14403-2:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012) |
| EN 26777:1993 | Water quality - Determination of nitrite - Molecular absorption spectrometric method (ISO 6777:1984) |
| ISO 10381-6:2009 | Soil quality Sampling Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 13877:1998 | Soil quality Determination of polynuclear aromatic hydrocarbons Method using high -performance liquid chromatography |
| ISO 11464:2006 | Soil quality Pretreatment of samples for physico-chemical analysis |
| ISO 14403-2:2012 | Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA) |
| CEN/TR 15310-1:2006 | Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions |
| EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
| EN 13137:2001 | Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
| ISO 12846:2012 | Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment |
| EN 15308:2016 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
| ISO 5667-15:2009 | Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples |
| EN 14346:2006 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| ISO 6777:1984 | Water quality — Determination of nitrite — Molecular absorption spectrometric method |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 10382:2002 | Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection |
| ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
| ISO 10381-7:2005 | Soil quality Sampling Part 7: Guidance on sampling of soil gas |
| ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
| ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| ISO 14507:2003 | Soil quality Pretreatment of samples for determination of organic contaminants |
| ISO 7888:1985 | Water quality — Determination of electrical conductivity |
| ISO 22155:2016 | Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| EN ISO 11074:2015 | Soil quality - Vocabulary (ISO 11074:2015) |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
| EN 15169:2007 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| EN 13656:2002 | Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| EN 14345:2004 | Characterization of waste - Determination of hydrocarbon content by gravimetry |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 14039:2004 | Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
| EN ISO 5667-15:2009 | Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| ISO 14403-1:2012 | Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) |
| ISO 10523:2008 | Water quality — Determination of pH |
| EN ISO 14403-1:2012 | Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012) |
| CEN/TR 15310-3:2006 | Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field |
| CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
| CEN/TR 15310-4:2006 | Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| EN ISO 11969:1996 | Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
| EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| CEN/TR 15310-5:2006 | Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan |
| EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.