I.S. EN 15333-1:2008
Current
The latest, up-to-date edition.
RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Minimum equipment
5 Requirements
5.1 Design
5.2 Materials
5.3 Diver worn pressure vessel(s) (if fitted)
5.4 Diver worn pressure vessel valve(s) (if fitted)
5.5 High and medium pressure parts and connections
5.5.1 General
5.5.2 Pressure reducer(s)
5.5.3 Pressure relief system(s)
5.6 Hoses
5.6.1 General
5.6.2 Tensile strength of high and medium pressure
hose assemblies
5.6.3 Flexibility of high and medium pressure hose
assemblies
5.6.4 Kinking of high and medium pressure hoses
5.6.5 High pressure hose assemblies leak test
5.6.6 High pressure hose assemblies bursting pressure
5.6.7 Medium pressure hose assemblies leak test
5.6.8 Medium pressure hose assemblies bursting pressure
5.6.9 Umbilical
5.7 Breathing system
5.7.1 Performance requirements
5.7.2 Exhalation valve
5.7.3 Maximum inspired partial pressure of carbon dioxide
5.7.4 Hydrostatic imbalance
5.8 Surface control system
5.8.1 General
5.8.2 Gas supply
5.8.3 Gas monitoring
5.9 Safety devices
5.9.1 General
5.9.2 Pressure indicator
5.9.3 Depth indicator (if fitted)
5.10 Facepiece
5.10.1 General
5.10.2 Helmet
5.10.3 Full face mask harness
5.10.4 Mouthpiece assembly
5.10.5 Breathing system connections
5.10.6 Visors
5.10.7 Head protection against impact
5.11 Harnesses
5.11.1 Body harness
5.11.2 Lifting harness
5.12 Auxiliary gas supply system (bail out)
5.13 Resistance to temperature
5.13.1 Storage
5.13.2 Leakage
5.14 Connectors
5.15 Cleaning and disinfecting
5.16 Pressure resistance of casings and monitors
5.17 Oxygen compatibility
5.18 Functional safety of electronical systems
5.19 Voice communications
5.19.1 General
5.19.2 Communication recording
5.20 Noise
5.21 Practical performance
6 Testing
6.1 General
6.1.1 Procedure
6.1.2 Nominal values and tolerances
6.1.3 Test equipment and test procedures
6.2 Visual Inspection
6.3 Pressure test of high and medium pressure parts
6.4 Hoses and umbilical assemblies
6.4.1 General
6.4.2 Tensile force of high and medium pressure hose
assemblies
6.4.3 Flexibility of high and medium pressure hoses
6.4.4 Kinking of high and medium pressure hoses
6.4.5 Leak test of high and medium pressure hose assemblies
6.4.6 Umbilical buoyancy
6.4.7 Umbilical life line
6.5 Breathing system
6.5.1 Configuration
6.5.2 General test conditions
6.5.3 Breathing performance
6.5.4 Upstream demand valve
6.5.5 Downstream demand valve
6.5.6 Volume weighted average inspired carbon dioxide
6.5.7 Exhalation valve
6.5.8 Hydrostatic imbalance
6.6 Safety devices
6.6.1 Pressure indicator
6.6.2 Depth indicator(s)
6.6.3 Pressure relief system(s)
6.6.4 Oxygen monitor
6.7 Facepiece
6.7.1 Mechanical strength of the connections between the
facepiece and the connector
6.7.2 Full face mask harness
6.7.3 Impact resistance of the visor(s)
6.7.4 Head protection
6.7.5 Noise assessment
6.7.6 Communications modified rhyme test
6.7.7 Field of vision
6.8 Lifting harness
6.9 Sea water resistance
6.10 Resistance to temperature
6.10.1 Testing at -20 degree C and 50 degree C
6.10.2 Testing after storage at -30 degree C and
+70 degree C
6.10.3 Cold water testing
6.11 Cleaning and disinfection
6.12 Oxygen pressure surge test
6.13 Practical performance
6.13.1 General
6.13.2 Test subjects
6.13.3 Basic testing
6.13.4 Functional testing when diving
6.13.5 Report
6.14 Pressure vessel valve
6.15 Mouthpiece
6.16 Casings and monitors
7 Marking
8 Information supplied by manufacturer
Annex A (informative) Artificial sea water
Annex B (informative) A typical Modified Rhyme Test word list
Annex ZA (informative) Relationship between this European Standard
and the Essential Requirements of EU Directive 89/686/EEC
(PPE)
Bibliography
Defines minimum requirements for demand surface supplied and demand surface oriented diving apparatus to ensure a minimum level of safe operation of the apparatus.
DocumentType |
Standard
|
Pages |
61
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
EN 148-3:1999 | Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 |
EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
EN 250:2014 | Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking |
EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
EN 134:1998 | Respiratory protective devices - Nomenclature of components |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
ISO 12209-1:2000 | Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Part 1: Yoke type connections |
EN 812:2012 | Industrial bump caps |
EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
EN ISO 15001:2011 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
EN ISO 12209-1:2000 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000) |
EN 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels |
EN ISO 12209-3:2000 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000) |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
EN 148-2:1999 | Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
EN ISO 12209-2:2000 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000) |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
ISO 12209-2:2000 | Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Part 2: Threaded connections |
EN 397:2012+A1:2012 | Industrial safety helmets |
EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
ISO 12209-3:2000 | Gas cylinders Outlet connections for gas cylinder valves for compressed breathable air Part 3: Adaptor for 230 bar valves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.