I.S. EN 15997:2011
Current
The latest, up-to-date edition.
ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements
and/or protective measures
7 Information for use
Annex A (informative) - Examples of All Terrain
Vehicles (ATVs - Quads)
Annex B (normative) - Service brake performance
Annex C (normative) - Parking brake/Mechanism
performance
Annex D (normative) - Handlebar
Annex E (normative) - Rider foot environment
Annex F (normative) - Longitudinal stability
Annex G (normative) - Hot surfaces
Annex H (normative) - Noise test code
Annex I (informative) - Vibration test code
Annex J (informative) - Pre-delivery form
Annex K (informative) - Examples of warnings,
pictograms and combinations that may be used
Annex L (normative) - Evaluation sheet before letting
a person use the ATV
Annex M (informative) - Instructions for tyres to be
included in the instructions handbook
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
Pertains to "All Terrain Vehicles" or "ATVs" as defined in Clause 3 using liquid fuels (e.g. petrol, diesel).
DocumentType |
Standard
|
Pages |
78
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
ISO 29802:2017 | All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
CEN/TR 15172-1:2005 | Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
SAE J1623_201502 | Off-Highway Vehicle Headlamps |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 8041:2005 | Human response to vibration Measuring instrumentation |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
EN 2941:2008 | Aerospace series - Nickel alloy rivets - Technical specification |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.