• There are no items in your cart

I.S. EN 16228-1:2014

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS

Available format(s)

Hardcopy , PDF

Superseded date

28-01-2022

Language(s)

English

Published date

01-01-2014

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.


Dates of withdrawal of national standards are available from NSAI.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or
  protective measures
7 Information for use
Annex A (informative) - List of drilling and foundation
        equipment
Annex B (normative) - Noise test code
Annex C (normative) - Whole-body and hand-arm vibration
        test
Annex D (informative) - Symbols and signs
Annex E (normative) - Instruction selecting and
        fitting of wire rope grips for free fall
        application
Annex F (normative) - Ground pressure calculation
        for crawler mounted drilling and foundation
        equipment
Annex G (normative) - Test conditions of the stopping
        performances of the rotation of the drilling head
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of
         EU Directive 2006/42/EC
Bibliography

Describes the common safety requirements for drilling and foundation equipment.

DevelopmentNote
Supersedes I.S. EN 791 & I.S. EN 996. (06/2014)
DocumentType
Standard
Pages
156
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy

Standards Relationship
EN 16228-1:2014 Identical

ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
EN 12096:1997 Mechanical vibration - Declaration and verification of vibration emission values
ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)
ISO 10262:1998 Earth-moving machinery Hydraulic excavators Laboratory tests and performance requirements for operator protective guards
ISO 10532:1995 Earth-moving machinery Machine-mounted retrieval device Performance requirements
ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
EN ISO 15667 : 2000 ACOUSTICS - GUIDELINES FOR NOISE CONTROL BY ENCLOSURES AND CABINS
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
ISO 4302:2016 Cranes — Wind load assessment
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
ISO 10570:2004 Earth-moving machinery — Articulated frame lock — Performance requirements
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 15817:2012 Earth-moving machinery — Safety requirements for remote operator control systems
PREN 13001-2 : DRAFT 2012 CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS
ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
ISO 6405-2:2017 Earth-moving machinery Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories
EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)
ISO 15667:2000 Acoustics Guidelines for noise control by enclosures and cabins
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
CEN/TR 15172-1:2005 Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery
ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 3450:2011 Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)
ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
EN 474-5:2006+A3:2013 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
ISO 5006:2017 Earth-moving machinery — Operator's field of view — Test method and performance criteria
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ISO 12117-2:2008 Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 9614-2 : 1996 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 10567:2007 Earth-moving machinery — Hydraulic excavators — Lift capacity
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN 795:2012 Personal fall protection equipment - Anchor devices
EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 2867:2011 Earth-moving machinery Access systems
ISO 9533:2010 Earth-moving machinery Machine-mounted audible travel alarms and forward horns Test methods and performance criteria
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
CEN/TS 13001-3-2:2008 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
ISO 6750:2005 Earth-moving machinery Operator's manual Content and format
EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO 10968:2004 Earth-moving machinery Operator's controls
ISO 10265:2008 Earth-moving machinery — Crawler machines — Performance requirements and test procedures for braking systems

View more information
€185.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.