I.S. EN 61098:2007
Current
The latest, up-to-date edition.
RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
Hardcopy , PDF
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Classification of assemblies
4.1 According to type of radiation to be measured
4.2 According to type of surface
4.3 According to type
5 Design characteristics
5.1 Positioning of user
5.2 Size of user
5.3 Hand monitoring facilities
5.4 Foot monitoring facilities
5.5 Body monitoring facilities
5.6 Visual display
5.7 Audible indicators
5.8 Monitoring period
5.9 Ease of decontamination
5.10 Detectors used
6 Performance requirements and test procedures
6.1 General test procedure
6.2 Statistical fluctuations
6.3 Reference sources
6.4 Nature of tests
6.5 Use of gas flow detectors
7 Radiation characteristics
7.1 Variation of response with source position
7.2 Background
7.3 Decision threshold (minimum detectable surface
emission rate)
7.4 Variation of response with energy
7.5 Response to other ionising radiations
7.6 Type and routine tests of performance
7.7 Linearity of indication
8 Overload protection
8.1 Requirements
8.2 Method of test
9 Availability
9.1 Warm-up time
9.2 Power failure
10 Environmental conditions
10.1 Temperature
10.2 Relative humidity
10.3 Atmospheric pressure
11 Power supply
11.1 Voltage and frequency
11.2 Electromagnetic compatibility
12 Storage
13 Documentation
13.1 Certificate
13.2 Operation and maintenance manual
13.3 Operational instructions
13.4 Type test report
Annex A (informative) Explanation of the derivation of
minimum detectable surface emission rate formula
Annex ZA (informative) Examples of possible additional
tests for further characterization of the sensitive
volume
Annex ZB (informative) Summation of information from adjacent
detectors
Annex ZC (normative) Normative references to international
publications with their corresponding European
publications
Applies to contamination warning assemblies and monitors used for the monitoring of radioactive contamination on the surface of personnel whether they be clothed or not.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
106
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
SupersededBy |
Standards | Relationship |
BS EN 61098:2007 | Identical |
DIN EN 61098 : 2008 | Identical |
NBN EN 61098 : 2007 | Identical |
NF EN 61098 : 2008 | Identical |
EN 61098:2007 | Identical |
IEC 60038:2009 | IEC standard voltages |
IEC 60050-394:2007 | International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors |
EN 60359:2002 | Electrical and electronic measurement equipment - Expression of performance |
IEC 61187:1993 | Electrical and electronic measuring equipment - Documentation |
IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
ISO 8769-2:1996 | Reference sources for the calibration of surface contamination monitors Part 2: Electrons of energy less than 0,15 MeV and photons of energy less than 1,5 MeV |
EN 61000-4-12:2017 | Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
ISO 7503-1:2016 | Measurement of radioactivity Measurement and evaluation of surface contamination Part 1: General principles |
EN 61187:1994/corrigendum:1995 | ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION |
IEC 60359:2001 | Electrical and electronic measurement equipment - Expression of performance |
ISO 8769:2016 | Reference sources Calibration of surface contamination monitors Alpha-, beta- and photon emitters |
IEC 60777:1983 | Terminology, quantities and units concerning radiation protection |
IEC 60050-393:2003 | International Electrotechnical Vocabulary (IEV) - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.