I.S. EN ISO 12679:2015
Current
The latest, up-to-date edition.
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Parent material
5 Component geometry
6 Spray materials
7 Gases for spraying
8 Liquid fuels for spraying
9 Spray equipment
10 Surface preparation prior to spraying
11 Thermal spraying procedure
12 Post-treatment of the coating
13 Health, safety and environmental aspects
14 Recommendations for quality assurance
15 Testing of components and accompanying specimens
Bibliography
Covers general guidelines for the workmanlike production of metallic, metal-ceramic, oxide-ceramic and plastic coatings, by means of thermal spraying on metallic and non-metallic parent materials.
DevelopmentNote |
Supersedes I.S. EN 14616. (11/2015)
|
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN ISO 12679:2015 | Identical |
ISO 12679:2011 | Identical |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ISO 14231:2000 | Thermal spraying Acceptance inspection of thermal spraying equipment |
ISO 14917:2017 | Thermal spraying — Terminology, classification |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 14232:2000 | Thermal spraying Powders Composition and technical supply conditions |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 14920:2015 | Thermal spraying — Spraying and fusing of self-fluxing alloys |
ISO 17836:2017 | Thermal spraying — Determination of the deposition efficiency for thermal spraying |
ISO 14922-3:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 3: Standard quality requirements |
ISO 14918:1998 | Thermal spraying Approval testing of thermal sprayers |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
ISO 10474:2013 | Steel and steel products — Inspection documents |
ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
ISO 14922-2:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 2: Comprehensive quality requirements |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 12690:2010 | Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
EN 12074:2000 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
ISO 14921:2010 | Thermal spraying Procedures for the application of thermally sprayed coatings for engineering components |
EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
ISO 14922-4:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements |
ISO 14922-1:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
ISO 14924:2005 | Thermal spraying Post-treatment and finishing of thermally sprayed coatings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.