ISO/TR 15235:2001
|
Preparation of steel substrates before application of paints and related products Collected information on the effect of levels of water-soluble salt contamination
|
ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method
|
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance
|
ISO 2063:2005
|
Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys
|
ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
ISO 15711:2003
|
Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
|
ISO 8502-4:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
|
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
|
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
|
ASTM D 4889 : 2015 : REDLINE
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
|
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
|
ISO 2808:2007
|
Paints and varnishes Determination of film thickness
|
ISO 4649:2017
|
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
|
ISO 21809-1:2011
|
Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
|
ISO 4590:2016
|
Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells
|
ISO 1172:1996
|
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
|
ISO 1827:2016
|
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
|
ISO 6502:2016
|
Rubber Guide to the use of curemeters
|
ASTM D 5289 : 2017 : REDLINE
|
TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS
|
ISO 14896:2009
|
Plastics — Polyurethane raw materials — Determination of isocyanate content
|
ISO 8302:1991
|
Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus
|
ISO 4897:1985
|
Cellular plastics Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
|
ISO 8301:1991
|
Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus
|
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion
|
ISO 8510-2:2006
|
Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel
|
ISO 14001:2015
|
Environmental management systems — Requirements with guidance for use
|
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
|
ISO 7822:1990
|
Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods
|
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
|
ISO 62:2008
|
Plastics Determination of water absorption
|
ISO 8502-6:2006
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
|
ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
ISO 8502-9:1998
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts
|
ISO 20340:2009
|
Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
|
EN 253:2009+A2:2015
|
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
ISO 844:2014
|
Rigid cellular plastics Determination of compression properties
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
ISO 814:2017
|
Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method
|
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
|
NORSOK M 501 : REV 6
|
SURFACE PREPARATION AND PROTECTIVE COATING
|
ISO 2781:2008
|
Rubber, vulcanized or thermoplastic Determination of density
|