I.S. EN ISO 4014:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
Hardcopy , PDF
04-03-2023
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Dimensions
4 Specifications and reference International Standards
5 Designation
Bibliography
Describes the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is the shorter.
| DevelopmentNote |
Supersedes I.S. EN 24014. (09/2006)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 4014 : 2011 | Identical |
| UNI EN ISO 4014 : 2011 | Identical |
| SN EN ISO 4014 : 2011 | Identical |
| NS EN ISO 4014 : 2011 | Identical |
| BS EN ISO 4014:2011 | Identical |
| UNE-EN ISO 4014:2011 | Identical |
| NEN EN ISO 4014 : 2011 | Identical |
| ISO 4014:2011 | Identical |
| EN ISO 4014:2011 | Identical |
| NBN EN ISO 4014 : 2011 | Identical |
| ONORM EN ISO 4014 : 2011 | Identical |
| DIN EN ISO 4014:2011-06 | Identical |
| I.S. 261:2013 | WATER SERVICES ROAD FURNITURE - REQUIREMENTS FOR CAST IRON COVERS AND FRAMES |
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread Product grades A and B |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 21670:2014 | Fasteners — Hexagon weld nuts with flange |
| ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 4753:2011 | Fasteners Ends of parts with external ISO metric thread |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 Property class 9 |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread Small series Product grade A |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) Product grade B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
| ISO 15071:2011 | Hexagon bolts with flange Small series Product grade A |
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4162:2012 | Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.