EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
|
ASTM B 364 : 1996
|
Standard Specification for Tantalum and Tantalum Alloy Ingots
|
BS 3073:1977
|
Specification for nickel and nickel alloys: strip
|
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements
|
ASTM B 348 : 2013 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Bars and Billets
|
ASTM B 265 : 2015 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
|
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
ASTM B 335 : 2003
|
Standard Specification for Nickel-Molybdenum Alloy Rod
|
EN 485-3:2003
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
|
ASTM B 575 : 2017 : REDLINE
|
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
|
DIN 17862:2012-03
|
TITANIUM AND TITANIUM ALLOY BARS - TECHNICAL SPECIFICATION
|
EN 485-2:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
|
EN 485-4:1993
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
|
ASTM B 473 : 2007
|
Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
|
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
|
EN 10087:1998
|
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
|
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
|
ASTM B 584 : 2014 : REDLINE
|
Standard Specification for Copper Alloy Sand Castings for General Applications
|
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
|
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
|
ASTM B 161 : 2005 : EDT 1
|
Standard Specification for Nickel Seamless Pipe and Tube
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
EN 1653:1997/A1:2000
|
COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
EN 10095:1999
|
Heat resisting steels and nickel alloys
|
EN ISO 6708:1995
|
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
|
ASTM A 351/A351M : 2016-05
|
SPECIFICATION FOR CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS
|
EN 10272:2016
|
Stainless steel bars for pressure purposes
|
DIN 17864:2012-03
|
TITANIUM AND TITANIUM WROUGHT ALLOYS FORGINGS (HAMMER AND DROP FORGINGS) - TECHNICAL SPECIFICATION
|
EN 10222-3:2017
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
|
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
|
DIN 17742:2002-09
|
WROUGHT NICKEL ALLOYS WITH CHROMIUM - CHEMICAL COMPOSITION
|
ASTM B 160 : 2005 : EDT 1
|
Standard Specification for Nickel Rod and Bar
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
|
EN 573-4:2004
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products
|
EN 1333:2006
|
Flanges and their joints - Pipework components - Definition and selection of PN
|
ASTM B 209 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
|
ASTM B 708 : 2012 : REDLINE
|
Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
|
ASTM A 105/A105M : 2014-11
|
SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
|
DIN 17743:2002-09
|
WROUGHT NICKEL ALLOYS WITH COPPER - CHEMICAL COMPOSITION
|
BS 3076:1989
|
Specification for nickel and nickel alloys: bar
|
ASTM A 312/A312M : 2017-03
|
SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
|
DIN 17860:2010-01
|
Titanium and titanium alloy strip, sheet and plate - Technical conditions of delivery
|
ASTM B 381 : 2013 : REDLINE
|
SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS
|
EN 10028-4:2017
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
|
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
|
ASTM A 494/A494M : 2017-03
|
SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY
|
DIN 17740:2002-09
|
WROUGHT NICKEL - CHEMICAL COMPOSITION
|
EN 1652:1997/AC:2003
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
|
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|
PREN 12516-1 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
|
ASTM B 333 : 2003
|
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
|