I.S. HD 620:2010
Current
Current
The latest, up-to-date edition.
DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2010
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
PART 1 - General requirements
PART 9 - HEPR insulated single core cables, and single
core pre-assembled cables
PART 10 - XLPE insulated single core and 3 core cables,
and single core pre-assembled cables
PART 11 - EPR insulated single core and 3 core cables
Defines the general requirements applicable to these cables, unless otherwise specified in the particular sections of this HD.
| DevelopmentNote |
Supersedes I.S. HD 620 PTS 1-5 and I.S. HD 620 PTS 6-9. (02/2010)
|
| DocumentType |
Standard
|
| Pages |
662
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| HD 620 : 2010 | Identical |
| EN 60229:2008 | Electric cables - Tests on extruded oversheaths with a special protective function |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 60332-3-23:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-23: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY B |
| HD 632 : 1998 | POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV) |
| EN 60332-3-21:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60986:2000+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| EN 50267-2-1:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
| IEC 60502-2:2014 RLV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| EN 50307:2002 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
| IEC 60332-3-23:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B |
| HD 605 S2:2008/corrigendum:2010 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
| IEC 60885-3:2015 RLV | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables |
| IEC 60888:1987 | Zinc-coated steel wires for stranded conductors |
| EN 60228:2005 COR 2005 | CONDUCTORS OF INSULATED CABLES |
| IEC 60949:1988 | Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
| ISO 6507-3:2005 | Metallic materials Vickers hardness test Part 3: Calibration of reference blocks |
| IEC 60332-3-24:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C |
| IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
| EN 50267-1:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
| NEN NPR 3626 : 1994 AMD 2 2011 | CABLES WITH INSULATION OF CROSS-LINKED POLYETHYLENE FOR VOLTAGES OF 6 KV UP TO AND INCLUDING 30 KV - CONTINUOUS CURRENT RATING AND THERMALLY PERMISSIBLE SHORT-CIRCUIT CURRENT |
| HD 626 S1:1996/A2:2002 | OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE U[O]/U(U[M]): 0,6/1 (1,2) KV |
| IEC 60230:1966 | Impulse tests on cables and their accessories |
| EN 60332-1-1:2004/A1:2015 | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
| EN 60332-3-10:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| EN 61034-2:2005/A1:2013 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005/A1:2013) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
| IEC 62230:2006+AMD1:2013 CSV | Electric cables - Spark-test method |
| IEC 60332-3-21:2000 | Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 61034-1:2005/A1:2014 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS (IEC 61034-1:2005/A1:2013) |
| EN 50182:2001/AC:2013 | CONDUCTORS FOR OVERHEAD LINES - ROUND WIRE CONCENTRIC LAY STRANDED CONDUCTORS |
| EN 50267-2-3:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| IEC 60229:2007 | Electric cables - Tests on extruded oversheaths with a special protective function |
| EN 60885-3:2015 | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables |
| HD 361 : S3 AMD 1 2006 | SYSTEM FOR CABLE DESIGNATION |
| EN 60230:2002 | Impulse tests on cables and their accessories |
| EN 62230:2007/A1:2014 | ELECTRIC CABLES - SPARK-TEST METHOD |
| EN 60332-3-24:2009 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 3-24: TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - CATEGORY C |
| EN 50414:2006 | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
| EN 50334:2001 | Marking by inscription for the identification of cores of electric cables |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| EN 50267-2-2:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| IEC 60332-3-10:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.