I.S. HD 627:2003
Current
The latest, up-to-date edition.
MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
Hardcopy , PDF
English
01-01-2003
PART 1 General Requirements
PART 2 Special test methods
PART 3 Multicore and multipair cables for use underground
3-A1: Multicore cable with copper conductors, single wire
armoured and PVC sheathed
3-A2: Multipair cable with copper conductors, single wire
armoured and PVC sheathed
3-E: 450/750 V multicore cable with polyethylene insulation
and sheath
3-F1: 300 V armoured XLPE insulated and PVC sheathed,
screened instrumentation cables
3-F2: 250 V armoured PVC insulated and PVC sheathed single
and multipair screened signalling cables
3-F3: 1kV armoured multicore XLPE insulated and PVC
sheathed cables
PART 4 Multicore and multipair halogenated cables complying with HD
405.1
4-B1: 500 V multiquad cables with and without a metallic
covering
4-B2: 750 V multicore cables with and without a metallic
covering
4-C1: 300/500 V Cables with solid or stranded conductors and
with or without a common screen
4-C1: 300/500 V Cables with solid or stranded conductors and
with or without a common screen
4-C2: Screened cables with stranded conductors and rated
voltage 150/250 V
4-D1: 450/750 V multicore PVC insulated and sheathed cables
4-D2: 450/750 V multicore PVC insulated and sheathed
cables with concentric conductor
4-E1: 450/750 V multicore cable with a metallic covering
4-E2: Multipair cables with a metallic covering
4-E3: 450/750 V multicore cable with a metallic covering
4-F: 300 V armoured and unarmoured XLPE insulated and PVC
sheathed, screened instrumentation cables
4-H1: 0.6/1kV PVC insulated multicore cables with and without
concentric conductor
4-H2: 0.6/1kV XLPE insulated multicore cables with or without
concentric conductor
4-J1: PVC insulated and sheathed multicore and multipair
cables
4-J2: 0.6/1kV multicore cables with a metallic screen
4-N: Multicore cables with PVC-insulation with and
without concentric conductor or screen or armouring for
rated voltages 0,6/1 kV
PART 5 Multicore and Multipair halogenated cables complying with HD
405.3 or similar
5-A1: Multicore cables with copper conductors, single wire
armoured and PVC sheathed
5-A2: Multipair cables with copper conductors, single wire and
double steel tape armoured and PVC sheathed
5-F1: 1kV XLPE insulated and PVC sheathed multicore cables
5-F2: 250 V PVC insulated and PVC sheathed multicore, single
and multipair signalling cables
5-F3: 500 V screened and unscreened PVC insulated and PVC
sheathed multicore control cables
5-F4: 300 V armoured and unarmoured XLPE insulated and
PVC sheathed, screened instrumentation cables
5-G1: Cables in pairs, triples and quads with copper
conductors, PVC insulated and sheathed and metallic
screen
5-G2: Cables in pairs, triples and quads with copper
conductors, EPR insulation, CSP sheaths and metallic
screen
5-M: PVC insulated and sheathed multicore cables and PVC or
Polyethylene insulated and PVC sheathed multipair cables
PART 6 Multicore and multipair halogen-free cables complying with HD
405.1
6-E: 450/750 V multicore cables with common screen
PART 7: Multicore and multipair halogen-free cables complying with
HD 405.3 or similar
7-A1: Multicore cables with copper conductors, single wire
armoured and unarmoured with non-halogenated
sheath
7-A2: Multipair cables with copper conductors single wire and
double steel tape armoured with non-halogenated
sheath
7-B1: 500 V multiquad cables with a metallic covering
7-B2: 750 V multicore cables with a metallic covering
7-D1: 450/750 V multicore cables without screen
7-D2: 450/750 V multicore cables with concentric conductor
7-F1: 1kV XLPE insulated and non-halogenated sheathed
multicore cables
7-F2: 300 V armoured and unarmoured XLPE insulated and
non-halogenated sheathed and screened
instrumentation cables
7-G: Cables in pairs, triples and quads with copper
conductors, metallic screen and having halogen free
all-non-metallic components
7-H: 0.6/1kV multicore cables with and without a concentric
conductor
7-K: 150 V multicore and multipair cables with and without a
metallic covering
7-L1: Cables in pairs and triples and multicore cables with
circular copper conductors and metallic covering
7-L2: Multipair and multicore cables with circular copper
conductors for plug-in connections
7-M: EPR or XLPE insulated and ZH sheathed multicore cables
and polyethylene insulated and ZH sheathed multipair
cables
7-N Halogen free, multicore cables with and without
concentric conductor or screen for rated voltages 0,6/1 kV
Applies to multicore and multipair rigid and flexible conductor cables for fixed installations having a rated voltage up to 1 kV and operating at a voltage above 80 V r.m.s.
DocumentType |
Standard
|
Pages |
858
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
HD 627 S1:1996/A2:2005 | Identical |
EN 50267-2-1:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
IEC 60502:1994 | Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV |
IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
HD 605 S2:2008/corrigendum:2010 | ELECTRIC CABLES - ADDITIONAL TEST METHODS |
IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
EN 60228:2005 COR 2005 | CONDUCTORS OF INSULATED CABLES |
EN 60332-1-2:2004/A11:2016 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
HD 383 : S2 AMD 2 | CONDUCTORS OF INSULATED CABLES - GUIDE TO THE DIMENSIONAL LIMITS OF CIRCULAR CONDUCTORS |
IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
HD 186 : S2 AMD 1 | MARKING BY INSCRIPTION FOR THE IDENTIFICATION OF CORES OF ELECTRIC CABLES HAVING MORE THAN 5 CORES |
HD 602 : 200S1 | TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY |
EN 50334:2001 | Marking by inscription for the identification of cores of electric cables |
EN 50267-2-2:1998 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
EN 50265-2-1:1998 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2-1: Procedures - 1 kW pre-mixed flame |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.