IEC 60060-2:2010
|
High-voltage test techniques - Part 2: Measuring systems |
EN 60229:2008
|
Electric cables - Tests on extruded oversheaths with a special protective function |
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements |
HD 632 : 1998
|
POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV) |
HD 323.2.11 : 200S1
|
BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST KA: SALT MIST |
IEC 61443:1999+AMD1:2008 CSV
|
Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV) |
IEC 60228:2004
|
Conductors of insulated cables |
EN 50307:2002
|
Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
HD 605 S2:2008/corrigendum:2010
|
ELECTRIC CABLES - ADDITIONAL TEST METHODS |
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
IEC 61109:2008
|
Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria |
IEC 62271-209:2007
|
High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations |
EN 60228:2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES |
ISO 606:2015
|
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
EN 50266-1:2001
|
Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 1: Apparatus |
HD 588.1 : S1 AMD 1
|
HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
EN 60270:2001/A1:2016
|
HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015) |
IEC 60332-1-2:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
EN 60507:2014
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems |
HD 626 S1:1996/A2:2002
|
OVERHEAD DISTRIBUTION CABLES OF RATED VOLTAGE U[O]/U(U[M]): 0,6/1 (1,2) KV |
IEC 60230:1966
|
Impulse tests on cables and their accessories |
IEC 60183:2015
|
Guidance for the selection of high-voltage A.C. cable systems |
EN 60071-1:2006/A1:2010
|
INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
IEC 62230:2006+AMD1:2013 CSV
|
Electric cables - Spark-test method |
IEC 60853-2:1989
|
Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages |
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
EN 62271-209:2007
|
High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations |
IEC 60229:2007
|
Electric cables - Tests on extruded oversheaths with a special protective function |
EN 50062:1991
|
Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear |
EN 60230:2002
|
Impulse tests on cables and their accessories |
EN 62230:2007/A1:2014
|
ELECTRIC CABLES - SPARK-TEST METHOD |
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 60507:2013
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems |
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules |
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
HD 329 : 200S1
|
TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT |
EN 50267-2-2:1998
|
Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
IEC 60287-1-1:2006+AMD1:2014 CSV
|
Electric cables - Calculation of the current rating - Part 1-1:Current rating equations (100 % load factor) and calculation of losses - General |