ICC IMC CODE AND COMMENTARY:2021
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IMC® Code and Commentary
Available format(s)
Hardcopy , PDF
Superseded date
07-10-2024
Superseded by
Language(s)
English
Published date
01-09-2021
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.This code shall regulate the design, installation, maintenance, alteration and inspection of mechanical systems that are permanently installed and utilized to provide control of environmental conditions and related processes within buildings.
| DocumentType |
Standard
|
| ISBN |
978-1-95246-861-2
|
| Pages |
538
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ANSI/ACCA 1 Manual D—2016,ANSI/ASHRAE/ACCA 183—2007 (reaffirmed 2014),ASHRAE 170-2017,ASHRAE 180-2012,ASME B16.5-2015,ASME B16.26-2016,ASME BPVC—2015,ASME CSD-1—2015,CPSC August 2011. Title 15,CSA B137.2—16,B137.3—16,B137.6—16,B137.9—16,B137.10—16,CSA C22.2 No. 218.1—M89(R2011),CSA B137.1—16,CSA B137.5—16,CSA B137.11—16,CSA B137.18—13,America FC1—2012,29 CFR Part 1910.1000 (2015),29 CFR Part 1910.1025 (2015),FDA Title 15,FDA Title 21,WW-P-325B (1976),IECC—18: International Energy Conservation Code,IFGC—18: International Fuel Gas Code,ANSI/IIAR 3—2012,ANSI/IIAR 4—2015,NAIMA AH116—09,NBBI NBIC—2011,ANSI/SMACNA 1999,ANSI/SMACNA 2004,SMACNA 2015,
|
| PublisherName |
International Code Council (ICC)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| ASTM F 877 : 2011 : REV A | Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems |
| NFPA 262 : 2015 | METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES |
| ASTM F 2389 : 2015 | Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems |
| CSA/ANSI Z21.1 : 2010 | HOUSEHOLD COOKING GAS APPLIANCES |
| ASTM B 43 : 2015 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| ASTM D 2241 : 2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
| ASTM F 2098 : 2008 | Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings |
| ASTM F 437 : 2015 | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| ASTM F 714 : 2013 | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| ASTM F 876 : 2015 : REV A | Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
| ASTM A 536 : 1984 : R2014 | Standard Specification for Ductile Iron Castings |
| NFPA 853 : 2010 | INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS |
| ASTM D 2412 : 2011 | Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading |
| ASTM F 2159 : 2014 | Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
| ASTM D 2467 : 2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM F 2769 : 2014 | Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems |
| ASTM F 441/F441M : 2015 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM D 3035 : 2015 | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| ASTM E 84 : 2016 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM F 1281 : 2011 | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| ASTM F 1282 : 2010 | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
| ASTM D 3261 : 2012 : EDT 1 | Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ASTM A 254/A254M : 2012 | Standard Specification for Copper-Brazed Steel Tubing |
| ASTM A 53/A53M : 2012 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| UL 723:11ED 2018-04-19 | Test for Surface Burning Characteristics of Building Materials |
| ASTM A 126 : 2004 : R2014 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings |
| ASTM B 32 : 2008 : R2014 | Standard Specification for Solder Metal |
| CSA C448 SERIES : 2016 | DESIGN AND INSTALLATION OF GROUND SOURCE HEAT PUMP SYSTEMS FOR COMMERCIAL AND RESIDENTIAL BUILDINGS |
| ASTM F 442/F442M : 2013 : EDT 1 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| ASTM A 420/A420M : 2014 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASTM F 2806 : 2010 : R2015 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM D 2235 : 2004 : R2011 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM F 1807 : 2015 | Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| ASTM D 2846/D2846M : 2014 | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems |
| ASTM D 2996 : 2001 : R2007 : EDT 1 | Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM F 493 : 2014 | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ASTM F 1055 : 2013 | Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing |
| ASTM F 1924 : 2012 | Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| ASTM F 439 : 2013 | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| ASTM D 2464 : 2015 | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| ASTM F 1960 : 2015 | Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing |
| ASTM B 42 : 2015 : REV A | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| UL 391:5ED 2010-09-10 | Standard for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| ASTM A 395/A395M : 1999 : R2014 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| ASTM D 2683 : 2014 | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| ASTM F 438 : 2015 | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM F 2623 : 2014 | Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing |
| ASTM F 1476 : 2007 : R2013 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM E 2231 : 2015 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM D 2737 : 2012 : REV A | Standard Specification for Polyethylene (PE) Plastic Tubing |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| NFPA 92 : 2015 | SMOKE CONTROL SYSTEMS |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.