IEC 60811-100:2012
Current
Current
The latest, up-to-date edition.
Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, Spanish, Castilian
Published date
12-03-2012
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Test values
5 Applicability
6 Type tests and other tests
7 Test report
Annex A (informative) - Structure and content of
IEC 60811
IEC 60811-100:2012 describes general requirements and considerations that are applicable to all the test methods given in the particular parts, unless otherwise specified. This first edition of IEC 60811-100 collects together general matters that apply to the restructured IEC 60811 series. A detailed explanation is provided in the Introduction. Annex A provides full information on the relation between the current and the previous series. This revised series of IEC 60811 is based upon the principle of "one test - one part". One significant technical change that now applies throughout the series is a defined minimum scheme for the presentation of test reports.
| Committee |
TC 20
|
| DevelopmentNote |
Stability Date: 2020. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| JIS C 3660-100:2019 | Identical |
| GOST IEC 60811-100 : 2015 | Identical |
| NF EN 60811-100 : 2012 | Identical |
| NBN EN 60811-100 : 2012 | Identical |
| NEN EN IEC 60811-100 : 2012 | Identical |
| PN EN 60811-100 : 2012 | Identical |
| DIN EN 60811-100 : 2012 | Identical |
| VDE 0473-811-100 : 2012 | Identical |
| UNE-EN 60811-100:2012 | Identical |
| BS EN 60811-100:2012 | Identical |
| CEI EN 60811-100 : 2014 | Identical |
| EN 60811-100:2012 | Identical |
| I.S. EN 60811-404:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS (IEC 60811-404:2012 (EQV)) |
| NF EN 60811-606 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 606: PHYSICAL TESTS - METHODS FOR DETERMINING THE DENSITY |
| UNE-EN 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
| UNE-EN 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
| 09/30193095 DC : 0 | BS EN 60811-607 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 607: PHYSICAL TEST - TEST FOR THE ASSESSMENT OF CARBON BLACK DISPERSION IN POLYETHYLENE AND POLYPROPYLENE |
| 09/30193079 DC : 0 | BS EN 60811-603 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 603: PHYSICAL TESTS - MEASUREMENT OF TOTAL ACID NUMBER OF FILLING COMPOUNDS |
| UNE-EN 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
| CEI EN 60811-401 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
| BS EN 60811-402:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Water absorption tests |
| BS EN 60811-403:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Ozone resistance test on cross-linked compounds |
| 09/30192958 DC : DRAFT JAN 2009 | BS EN 60811-301 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREE C OF FILLING COMPOUNDS |
| NF EN 60811-408 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: MISCELLANEOUS TESTS - LONG-TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| NF EN 60811-502 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 502: MECHANICAL TESTS - SHRINKAGE TEST FOR INSULATIONS |
| 09/30193039 DC : 0 | BS EN 60811-507 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS |
| 09/30192943 DC : DRAFT JAN 2009 | BS EN 60811-201 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
| 09/30193075 DC : DRAFT JAN 2009 | BS EN 60811-602 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 602: PHYSICAL TESTS - SEPARATION OF OIL IN FILLING COMPOUNDS |
| 09/30192978 DC : DRAFT JAN 2009 | BS EN 60811-404 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: ENVIRONMENTAL TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS MADE WITH ELASTOMERIC COMPOUNDS |
| CEI EN 60811-302 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREES C AND 100 DEGREES C OF FILLING COMPOUNDS |
| 09/30193010 DC : 0 | BS EN 60811-412 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: ENVIRONMENTAL TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB |
| 09/30193059 DC : 0 | BS EN 60811-511 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 511: MECHANICAL TESTS - MEASUREMENT OF THE MELT FLOW INDEX OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| UNE-EN 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
| I.S. EN 60811-503:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS (IEC 60811-503:2012 (EQV)) |
| 09/30193055 DC : 0 | BS EN 60811-510 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 510: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER THERMAL AGEING IN AIR |
| UNE-EN 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
| NF EN 60811-404 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS MADE WITH CROSSLINKED COMPOUNDS |
| NF EN 60811-510 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 510: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER THERMAL AGEING IN AIR |
| 09/30192954 DC : DRAFT JAN 2009 | BS EN 60811-203 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
| 09/30192998 DC : 0 | BS EN 60811-409 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: ENVIRONMENTAL TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS |
| 09/30192986 DC : DRAFT JAN 2009 | BS EN 60811-406 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: ENVIRONMENTAL TESTS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| I.S. EN 60811-403:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TEST ON CROSS-LINKED COMPOUNDS (IEC 60811-403:2012 (EQV)) |
| I.S. EN 60811-409:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: MISCELLANEOUS TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS (IEC 60811-409:2012 (EQV)) |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| I.S. EN 60811-302:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREES C AND 100 DEGREES C OF FILLING COMPOUNDS (IEC 60811-302:2012 (EQV)) |
| CEI EN 60811-202 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
| I.S. EN 60811-510:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 510: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER THERMAL AGEING IN AIR (IEC 60811-510:2012 (EQV)) |
| BS EN 60811-410:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
| I.S. EN 60811-604:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 604: PHYSICAL TESTS - MEASUREMENT OF ABSENCE OF CORROSIVE COMPONENTS IN FILLING COMPOUNDS (IEC 60811-604:2012 (EQV)) |
| I.S. EN 50289-4-17:2015 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| CEI EN 60811-405 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
| EN 60811-201:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS (IEC 60811-201:2012/A1:2017) |
| UNE-EN 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
| I.S. EN 60811-407:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: MISCELLANEOUS TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS (IEC 60811-407:2012 (EQV)) |
| I.S. EN 60811-402:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: MISCELLANEOUS TESTS - WATER ABSORPTION TESTS (IEC 60811-402:2012 (EQV)) |
| NF EN 60811-507 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS |
| NF EN 60811-202 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATHS |
| EN 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
| EN 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
| EN 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
| EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| EN 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
| EN 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
| EN 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
| EN 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
| EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| EN 50289-4-17:2015 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| BS EN 60811-501 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
| 09/30192962 DC : DRAFT JAN 2009 | BS EN 60811-302 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREE C AND 100 DEGREE C OF FILLING COMPOUNDS |
| I.S. EN 60811-502:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 502: MECHANICAL TESTS - SHRINKAGE TEST FOR INSULATIONS (IEC 60811-502:2012 (EQV)) |
| BS EN 60811-602:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Separation of oil in filling compounds |
| EN 60811-202:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH (IEC 60811-202:2012/A1:2017) |
| BS EN 60811-409:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths |
| I.S. EN 60811-511:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 511: MECHANICAL TESTS - MEASUREMENT OF THE MELT FLOW INDEX OF POLYETHYLENE COMPOUNDS |
| BS EN 60811-201:2012 | Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of insulation thickness |
| UNE-EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| I.S. EN 60811-505:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS (IEC 60811-505:2012 (EQV)) |
| BS EN 60811-203:2012 | Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of overall dimensions |
| I.S. EN 60811-512:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 512: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE (IEC 60811-512:2012 (EQV)) |
| I.S. EN 60811-408:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: MISCELLANEOUS TESTS - LONG-TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS (IEC 60811-408:2012 (EQV)) |
| BS EN 60811-404:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Mineral oil immersion tests for sheaths |
| BS EN 60811-512:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature |
| I.S. EN 60811-405:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS (IEC 60811-405:2012 (EQV)) |
| 15/30331409 DC : 0 | BS EN 62153-4-17 - METALLIC COMMUNICATION CABLE TEST METHODS - PART 4-17: ELECTROMAGNETIC COMPATIBILITY (EMC) - REDUCTION FACTOR TEST METHOD |
| BS EN 60811-607:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| NF EN 60811-301 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREES C OF FILLING COMPOUNDS |
| BS EN 60811-601:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of the drop point of filling compounds |
| I.S. EN 60811-406:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: MISCELLANEOUS TESTS - RESISTANCE TO STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS (IEC 60811-406:2012 (EQV)) |
| NF EN 60811-412 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB |
| 09/30193047 DC : 0 | BS EN 60811-508 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
| BS EN 60811-506:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Impact test at low temperature for insulations and sheaths |
| BS EN 60811-503:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Shrinkage test for sheaths |
| UNE-EN 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
| BS EN 60811-405:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths |
| NF EN 60811-513 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 513: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER CONDITIONING |
| NF EN 60811-601 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 601: PHYSICAL TESTS - MEASUREMENT OF THE DROP-POINT OF FILLING COMPOUNDS |
| UNE-EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| BS EN 60811-508:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Pressure test at high temperature for insulation and sheaths |
| EN 60811-509:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) (IEC 60811-509:2012/A1:2017) |
| EN 60811-508:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS (IEC 60811-508:2012/A1:2017) |
| BS EN 60811-509:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test) |
| I.S. EN 60811-203:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS (IEC 60811-203:2012 (EQV)) |
| NF EN 60811-605 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 605: PHYSICAL TESTS - MEASUREMENT OF CARBON BLACK AND/OR MINERAL FILLER IN POLYETHYLENE COMPOUNDS |
| CEI EN 60811-301 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREES C OF FILLING COMPOUNDS |
| NF EN 60811-508 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
| UNE-EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| CEI EN 60811-408 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: MISCELLANEOUS TESTS - LONG-TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| NF EN 60811-503 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS |
| I.S. EN 60811-602:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 602: PHYSICAL TESTS - SEPARATION OF OIL IN FILLING COMPOUNDS (IEC 60811-602:2012 (EQV)) |
| IEC 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
| IEC 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
| IEC 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
| 09/30193031 DC : 0 | BS EN 60811-505 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
| I.S. EN 60811-507:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 507: MECHANICAL TESTS - HOT SET TEST FOR CROSS-LINKED MATERIALS (IEC 60811-507:2012 (EQV)) |
| NF EN 60811-407 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: MISCELLANEOUS TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| 09/30193027 DC : 0 | BS EN 60811-504 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS |
| BS EN 60811-510:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air |
| BS EN 60811-408:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds |
| I.S. EN 60811-411:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: MISCELLANEOUS TESTS - LOW-TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS (IEC 60811-411:2012 (EQV)) |
| BS EN 50289-4-17:2015 | Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| NF EN 60811-511 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 511: MECHANICAL TESTS - MEASUREMENT OF THE MELT FLOW INDEX OF POLYETHYLENE COMPOUNDS |
| 09/30192990 DC : DRAFT JAN 2009 | BS EN 60811-407 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: ENVIRONMENTAL TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| NF EN 60811-405 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: MISCELLANEOUS TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
| BS EN 60811-605:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds |
| CEI EN 60811-201 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
| 09/30193071 DC : 0 | BS EN 60811-601 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 601: PHYSICAL TESTS - MEASUREMENT OF THE DROP-POINT OF FILLING COMPOUNDS |
| NF EN 60811-501 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
| CEI EN 60811-203 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
| CEI EN 60811-412 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB |
| 09/30193006 DC : 0 | BS EN 60811-411 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: ENVIRONMENTAL TESTS - LOW TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS |
| BS EN 60811-511:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Measurement of the melt flow index of polyethylene compounds |
| BS EN 60811-412:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb |
| UNE-EN 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
| BS EN 60811-302:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Electrical tests. Measurement of the d.c. resistivity at 23°C and 100°C of filling compounds |
| BS EN 60811-603:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of total acid number of filling compounds |
| BS EN 60811-604:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Measurement of absence of corrosive components in filling compounds |
| BS EN 60811-606:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Physical tests. Methods for determining the density |
| 17/30354707 DC : 0 | BS ISO 19642-2 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 2: TEST METHODS |
| BS EN 60811-407:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds |
| 09/30193091 DC : 0 | BS EN 60811-606 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 606: PHYSICAL TESTS - METHODS FOR DETERMINING THE DENSITY |
| BS EN 60811-502:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Shrinkage test for insulations |
| 09/30192966 DC : DRAFT JAN 2009 | BS EN 60811-401 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: ENVIRONMENTAL TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
| 09/30192994 DC : 0 | BS EN 60811-408 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 408: ENVIRONMENTAL TESTS - LONG TERM STABILITY TEST OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| NF EN 60811-512 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 512: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE |
| NF EN 60811-504 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS |
| EN 60811-401:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN (IEC 60811-401:2012/A1:2017) |
| I.S. EN 60811-513:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 513: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER CONDITIONING (IEC 60811-513:2012 (EQV)) |
| CEI EN 60811-403 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TESTS ON CROSS-LINKED COMPOUNDS |
| EN 60811-410:2012/A1:2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS (IEC 60811-410:2012/A1:2017) |
| I.S. EN 60811-410:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
| I.S. EN 60811-601:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 601: PHYSICAL TESTS - MEASUREMENT OF THE DROP POINT OF FILLING COMPOUNDS (IEC 60811-601:2012 (EQV)) |
| CEI EN 60811-402 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: MISCELLANEOUS TESTS - WATER ABSORPTION TESTS |
| UNE-EN 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
| NF EN 60811-406 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: MISCELLANEOUS TESTS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| UNE-EN 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
| NF EN 60811-402 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: MISCELLANEOUS TESTS - WATER ABSORPTION TESTS |
| NF EN 60811-401 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
| IEC 60811-509:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) |
| IEC 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
| IEC 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
| IEC 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
| BS EN 60811-401:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Thermal ageing methods. Ageing in an air oven |
| BS EN 60811-202:2012 | Electric and optical fibre cables. Test methods for non-metallic materials General tests. Measurement of thickness of non-metallic sheath |
| NF EN 60811-602 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 602: PHYSICAL TESTS - SEPARATION OF OIL IN FILLING COMPOUNDS |
| 09/30193051 DC : 0 | BS EN 60811-509 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING |
| BS EN 60811-507:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Hot set test for cross-linked materials |
| CEI EN 60811-409 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: MISCELLANEOUS TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS |
| UNE-EN 60811-507:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
| CEI EN 60811-410 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
| 09/30193063 DC : 0 | BS EN 60811-512 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 512: MECHANICAL TESTS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| I.S. EN 60811-501:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS (IEC 60811-501:2012 (EQV)) |
| BS EN 60811-411:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Low-temperature brittleness of filling compounds |
| I.S. EN 60811-201:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
| 09/30193035 DC : 0 | BS EN 60811-506 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
| 09/30193019 DC : 0 | BS EN 60811-502 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 502: MECHANICAL TESTS - SHRINKAGE TEST FOR INSULATIONS |
| NF EN 60811-506 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
| I.S. EN 60811-603:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 603: PHYSICAL TESTS - MEASUREMENT OF TOTAL ACID NUMBER OF FILLING COMPOUNDS (IEC 60811-603:2012 (EQV)) |
| 09/30192974 DC : DRAFT JAN 2009 | BS EN 60811-403 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: ENVIRONMENTAL TESTS - OZONE RESISTANCE TEST ON ELASTOMERIC COMPOUNDS |
| BS EN 60811-513:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning |
| I.S. EN 60811-301:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 301: ELECTRICAL TESTS - MEASUREMENT OF THE PERMITTIVITY AT 23 DEGREES C OF FILLING COMPOUNDS (IEC 60811-301:2012 (EQV)) |
| 09/30193067 DC : 0 | BS EN 60811-513 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 513: MECHANICAL TESTS - METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - WRAPPING TEST AFTER CONDITIONING |
| BS EN 60811-504:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Bending tests at low temperature for insulation and sheaths |
| NF EN 60811-203 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 203: GENERAL TESTS - MEASUREMENT OF OVERALL DIMENSIONS |
| UNE-EN 60811-302:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
| UNE-EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| UNE-EN 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
| 09/30192947 DC : DRAFT JAN 2009 | BS EN 60811-202 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
| 09/30193015 DC : 0 | BS EN 60811-501 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 501: MECHANICAL TESTS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES OF INSULATING AND SHEATHING COMPOUNDS |
| NF EN 60811-505 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 505: MECHANICAL TESTS - ELONGATION AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS |
| UNE-EN 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
| I.S. EN 60811-504:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 504: MECHANICAL TESTS - BENDING TESTS AT LOW TEMPERATURE FOR INSULATION AND SHEATHS (IEC 60811-504:2012 (EQV)) |
| UNE-EN 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
| NF EN 60811-603 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 603: PHYSICAL TESTS - MEASUREMENT OF TOTAL ACID NUMBER OF FILLING COMPOUNDS |
| NF EN 60811-410 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: MISCELLANEOUS TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
| I.S. EN 60811-606:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 606: PHYSICAL TESTS - METHODS FOR DETERMINING THE DENSITY (IEC 60811-606:2012 (EQV)) |
| UNE-EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| I.S. EN 60811-607:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 607: PHYSICAL TESTS - TEST FOR THE ASSESSMENT OF CARBON BLACK DISPERSION IN POLYETHYLENE AND POLYPROPYLENE (IEC 60811-607:2012 (EQV)) |
| EN 60811-511:2012/A1:2017 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds |
| NF EN 60811-604 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 604: PHYSICAL TESTS - MEASUREMENT OF ABSENCE OF CORROSIVE COMPONENTS IN FILLING COMPOUNDS |
| UNE-EN 60811-502:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
| I.S. EN 60811-605:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 605: PHYSICAL TESTS - MEASUREMENT OF CARBON BLACK AND/OR MINERAL FILLER IN POLYETHYLENE COMPOUNDS (IEC 60811-605:2012 (EQV)) |
| I.S. EN 60811-401:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 401: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR OVEN |
| NF EN 60811-302 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 302: ELECTRICAL TESTS - MEASUREMENT OF THE D.C. RESISTIVITY AT 23 DEGREES C AND 100 DEGREES C OF FILLING COMPOUNDS |
| CEI EN 60811-407 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 407: MISCELLANEOUS TESTS - MEASUREMENT OF MASS INCREASE OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| I.S. EN 60811-202:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 202: GENERAL TESTS - MEASUREMENT OF THICKNESS OF NON-METALLIC SHEATH |
| I.S. EN 60811-506:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 506: MECHANICAL TESTS - IMPACT TEST AT LOW TEMPERATURE FOR INSULATIONS AND SHEATHS (IEC 60811-506:2012 (EQV)) |
| CEI EN 60811-404 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS |
| NF EN 60811-409 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 409: MISCELLANEOUS TESTS - LOSS OF MASS TEST FOR THERMOPLASTIC INSULATIONS AND SHEATHS |
| CEI EN 60811-411 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: MISCELLANEOUS TESTS - LOW TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS |
| IEC 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
| IEC 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| IEC 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| IEC 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| IEC 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| IEC 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
| IEC 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
| IEC 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
| IEC 60811-401:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
| IEC 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
| IEC 60811-201:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
| IEC 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
| UNE-EN 60811-201:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
| IEC 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
| IEC 60811-202:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
| IEC 60811-507:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
| IEC 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| IEC 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
| IEC 60811-511:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds |
| UNE-EN 60811-202:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
| UNE-EN 60811-410:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
| IEC 60811-411:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
| UNE-EN 60811-509:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) |
| IEC 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
| IEC 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
| IEC 60811-410:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
| IEC 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
| IEC 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
| IEC 60811-502:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
| UNE-EN 60811-401:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
| IEC 60811-508:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths |
| UNE-EN 60811-508:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths |
| UNE-EN 60811-511:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds |
| IEC 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| IEC 60811-302:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
| IEC 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
| UNE-EN 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
| 09/30193023 DC : 0 | BS EN 60811-503 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 503: MECHANICAL TESTS - SHRINKAGE TEST FOR SHEATHS |
| I.S. EN 60811-509:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) |
| 09/30192970 DC : DRAFT JAN 2009 | BS EN 60811-402 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 402: ENVIRONMENTAL TESTS - WATER ABSORPTION TESTS |
| BS EN 60811-505:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Mechanical tests. Elongation at low temperature for insulations and sheaths |
| CEI EN 60811-406 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 406: MISCELLANEOUS TESTS - RESISTANCE TO STRESS CRACKING OF POLYETHYLENE AND POLYPROPYLENE COMPOUNDS |
| 09/30192982 DC : DRAFT JAN 2009 | BS EN 60811-405 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 405: ENVIRONMENTAL TESTS - THERMAL STABILITY TEST FOR PVC INSULATIONS AND PVC SHEATHS |
| BS EN 60811-406:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds |
| BS EN 60811-301:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Electrical tests. Measurement of the permittivity at 23°C of filling compounds |
| UNE-EN 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
| UNE-EN 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
| NF EN 60811-201 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 201: GENERAL TESTS - MEASUREMENT OF INSULATION THICKNESS |
| NF EN 60811-411 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 411: MISCELLANEOUS TESTS - LOW TEMPERATURE BRITTLENESS OF FILLING COMPOUNDS |
| UNE-EN 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| UNE-EN 50289-4-17:2016 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| 09/30193083 DC : 0 | BS EN 60811-604 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 604: PHYSICAL TESTS - MEASUREMENT OF ABSENCE OF CORROSIVE COMPONENTS IN FILLING COMPOUNDS |
| 09/30193002 DC : 0 | BS EN 60811-410 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 410: ENVIRONMENTAL TESTS - TEST METHOD FOR COPPER-CATALYZED OXIDATIVE DEGRADATION OF POLYOLEFIN INSULATED CONDUCTORS |
| 09/30193087 DC : 0 | BS EN 60811-605 - ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 605: PHYSICAL TESTS - MEASUREMENT OF CARBON BLACK AND/OR MINERAL FILLER IN POLYETHYLENE COMPOUNDS |
| NF EN 60811-607 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 607: PHYSICAL TESTS - TEST FOR THE ASSESSMENT OF CARBON BLACK DISPERSION IN POLYETHYLENE AND POLYPROPYLENE |
| UNE-EN 60811-411:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
| UNE-EN 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
| UNE-EN 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
| I.S. EN 60811-508:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 508: MECHANICAL TESTS - PRESSURE TEST AT HIGH TEMPERATURE FOR INSULATION AND SHEATHS |
| I.S. EN 60811-412:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 412: MISCELLANEOUS TESTS - THERMAL AGEING METHODS - AGEING IN AN AIR BOMB (IEC 60811-412:2012 (EQV)) |
| UNE-EN 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
| NF EN 60811-403 : 2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 403: MISCELLANEOUS TESTS - OZONE RESISTANCE TEST ON CROSS-LINKED COMPOUNDS |
| UNE-EN 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
| NF EN 60811-509 : 2012 AMD 1 2017 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 509: MECHANICAL TESTS - TEST FOR RESISTANCE OF INSULATIONS AND SHEATHS TO CRACKING (HEAT SHOCK TEST) |
| IEC 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
| EN 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
| EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| EN 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
| EN 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
| EN 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| EN 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
| EN 60811-502:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
| EN 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
| EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| EN 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
| EN 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
| EN 60811-411:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
| EN 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
| EN 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
| EN 60811-302:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
| EN 60811-507:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
| EN 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
| EN 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
| EN 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
| EN 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
| IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| IEC 60050-461:2008 | International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.