IEC 61558-2-13:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
19-10-2022
English - French, Spanish, Castilian
11-02-2009
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Ratings
7 Classification
8 Marking and other information
9 Protection against electric shock
10 Change of input voltage setting
11 Output voltage and output current under load
12 No-load output voltage
13 Short-circuit voltage
14 Heating
15 Short-circuit and overload protection
16 Mechanical strength
17 Protection against harmful ingress of dust, solid
objects and moisture
18 Insulation resistance, dielectric strength and leakage
current
19 Construction
20 Components
21 Internal wiring
22 Supply connection and other external flexible cable
or cords
23 Terminals for external conductors
24 Provisions for protective earthing
25 Screws and connections
26 Creepage distances, clearances and distances through
insulation
27 Resistance to heat, fire and tracking
28 Resistance to rusting
Annexes
Annex C - Creepage distances (cr), clearances (cl) and
distances through insulation (dti) Material
group II (400 <= CTI < 600)
Annex D - Creepage distances (cr), clearances (cl) and
distances through insulation (dti) Material
group I (CTI >= 600)
Annex R - Explanations of the application of 4.2 of
IEC 60664-1:2007
Bibliography
IEC 61558-2-13:2009 deals with the safety of auto transformers for general applications and power supply units incorporating auto transformers for general applications. Transformers incorporating electronic circuits are also covered by this standard. This second edition cancels and replaces the first edition published in 1999. It constitutes a technical revision. The main changes consist of updating this part in accordance with Part 1 (2005), and increasing the supply voltages up to 1 100 V to be in line with the standards of TC 14. This part has the status of a group safety publication in accordance with IEC Guide 104. This part is intended to be used in conjunction with the latest edition of IEC 61558-1 and its amendments. It is based on the second edition (2005) of that standard. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months from the date of publication.
Committee |
TC 96
|
DevelopmentNote |
Partially supersedes IEC 60989 (12/2001) Supersedes IEC 60742 (07/2004) Stability Date: 2015. (10/2012)
|
DocumentType |
Standard
|
Pages |
29
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN IEC 61558-2-13 : 2009 | Identical |
SAC GB 19212-14 : 2012 | Identical |
VDE 0570-2-13 : 2009 | Identical |
BS EN 61558-2-13:2009 | Identical |
SN EN 61558-2-13 : 2000 | Identical |
UNE-EN 61558-2-13:2010 | Identical |
I.S. EN 61558-2-13:2009 | Identical |
EN 61558-2-13:2009 | Identical |
DIN EN 61558-2-13 : 2009 | Identical |
CEI EN 61558-2-13 : 2010 | Identical |
NF EN 61558-2-13 : 2009 | Identical |
PN EN 61558-2-13 : 2011 | Identical |
CEI EN 61558-2-26 : 2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-26: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR SAVING ENERGY AND OTHER PURPOSES |
BS EN ISO 12696:2016 | Cathodic protection of steel in concrete |
PREN ISO 12696 : DRAFT 2009 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
I.S. EN 61347-2-2:2012 | LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS (IEC 61347-2-2:2011 (EQV)) |
CEI EN 61347-2-2 : 2012 | LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEPDOWN CONVERTORS FOR FILAMENT LAMPS |
EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
EN 61558-2-16:2009/A1:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013) |
EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
EN ISO 12696:2016 | Cathodic protection of steel in concrete (ISO 12696:2016) |
I.S. EN 61558-2-16:2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS |
UNE-EN 61558-2-26:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
09/30185957 DC : 0 | BS EN ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
BS EN 61347-2-2:2012 | Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
IEC 61347-2-2:2011 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
UNE-EN 61347-2-13:2015 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
UNE-EN ISO 12696:2017 | Cathodic protection of steel in concrete (ISO 12696:2016) |
I.S. EN 61558-2-26:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-26: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLY UNITS FOR SAVING ENERGY AND OTHER PURPOSES (IEC 61558-2-26:2013 (EQV)) |
BS EN 61558-2-16 : 2009 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS |
BS EN 61347-2-13 : 2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014) |
IEC 61347-2-13:2014+AMD1:2016 CSV | Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
ISO 12696:2016 | Cathodic protection of steel in concrete |
IEC 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes |
UNE-EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
BS EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
DIN EN ISO 12696:2016-07 (Draft) | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
I.S. EN ISO 12696:2016 | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
I.S. EN 61347-2-13:2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
AS/NZS 61347.2.2:2020 | Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2011, MOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.