• Shopping Cart
    There are no items in your cart

IEEE 4-1995

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

IEEE Standard Techniques for High-Voltage Testing

Available format(s)

PDF

Superseded date

08-07-2021

Superseded by

IEEE 4-2013

Language(s)

English

Published date

12-10-1995

€172.50
Excluding VAT

Committee
Power System Instrumentation and Measurements
DocumentType
Standard
Pages
135
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy
Supersedes

IEEE C2-2002 National Electrical Safety Code 2002 Edition
IEEE C2-2023 2023 National Electrical Safety Code(R) (NESC(R))
IEEE 404-2012 IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV
IEEE C57.13-2008 IEEE Standard Requirements for Instrument Transformers
IEEE C57.13.5-2009 IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
IEEE 112-1996 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
IEEE 62-1995 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors
IEEE/IEC 60076-21-2011 Power Transformers - Part 21: Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
IEEE 824-2004 IEEE Standard for Series Capacitor Banks in Power Systems
IEEE C62.11-2012 REDLINE IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
IEEE 400.2-2004 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
IEEE C37.37-1996 IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V)
IEEE C37.017-2010 IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear
IEEE C37.30.1-2011 IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
IEEE 400.1-2007 IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage
IEEE C57.16-2011 IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
IEEE C57.12.01-2005 IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings
IEEE 1783-2009 IEEE Guide for Test Methods and Procedures to Evaluate the Electrical Performance of Insulators in Freezing Conditions
IEEE C57.12.91-2011 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE C57.19.100-2012 REDLINE IEEE Guide for Application of Power Apparatus Bushings
IEEE C62.11-2005 IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV)
IEEE C57.131-2012 IEEE Standard Requirements for Tap Changers
IEEE C57.15-2009 REDLINE IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
IEEE C93.4-2012 IEEE Standard for Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C57.19.03-1996 IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications
IEEE C57.113-2010 REDLINE IEEE Recommended Practice for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
IEEE 1799-2012 IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings
IEEE C57.12.80-2002 IEEE Standard Terminology for Power and Distribution Transformers
IEEE/IEC C37.60-2012 IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
IEEE C50.13-2005 IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
IEEE 1043-1996 IEEE Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils
IEEE 1310-1996 IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
IEEE 95-2002 IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
IEEE C37.13.1-2006 IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
IEEE 516-2009 REDLINE IEEE Guide for Maintenance Methods on Energized Power Lines
IEEE 433-2009 REDLINE IEEE Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
IEEE C37.41-2008 REDLINE IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
IEEE 400-2012 REDLINE IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE C62.82.1-2010 IEEE Standard for Insulation Coordination--Definitions, Principles, and Rules
IEEE C57.12.60-2009 REDLINE IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers
IEEE C37.63-2005 IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
IEEE 386-2006 IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V
IEEE 389-1996 IEEE Recommended Practice for Testing Electronics Transformers and Inductors
IEEE C37.23-2003 IEEE Standard for Metal-Enclosed Bus
IEEE 1862-2014 IEEE Recommended Practice for Overvoltage and Insulation Coordination of Transmission Systems at 1000 kV AC and Above
IEEE 1277-2010 IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE 404-2006 IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2 500v to 500 000v
IEEE C57.12.90-2010 IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE 1675-2008 IEEE Standard for Broadband Over Powerline Hardware
IEEE C37.016-2006 IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV
IEEE C57.12.90-2006 IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE 434-2006 IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
IEEE C57.12.80-2010 IEEE Standard Terminology for Power and Distribution Transformers
IEEE C37.20.1-2002 IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
IEEE C37.100.1-2007 IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
IEEE C37.20.6-2007 IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
IEEE C62.62-2018 IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
IEEE 115-2009 REDLINE IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis
IEEE C57.21-2008 IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.