IEEE C57.12.28-2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity
Available format(s)
Hardcopy , PDF
Superseded date
03-05-2024
Superseded by
Language(s)
English
Published date
15-07-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Overview
2 Normative references
3 Definitions
4 Enclosure security
5 Enclosure design and coating system requirements
6 Labels
7 General
Annex A (normative) - Simulated corrosive atmospheric
breakdown (SCAB) procedure
Annex B (informative) - Pry bar
Annex C (informative) - Bibliography
Specifies the requirements for a comprehensive integrity system for pad-mounted enclosures providing long field life with minimum maintenance and positive safety features.
| Committee |
Transformers
|
| DevelopmentNote |
Supersedes IEEE DRAFT C57.12.28. (10/2005) Supersedes ANSI C57.12.28. (01/2011)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-9162-1
|
| Pages |
34
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE C57.12.29-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE C57.12.30-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE C57.12.38-2014 | IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below |
| C22.2 NO. 31-18 | Switchgear assemblies |
| 08/30184557 DC : DRAFT JUNE 2008 | BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV |
| CSA C199 : 2008 | THREE-PHASE NETWORK DISTRIBUTION TRANSFORMERS |
| CSA C227.3 : 2006 | LOW-PROFILE, SINGLE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS |
| IEEE C37.63-2013 REDLINE | IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV |
| UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
| IEEE C57.12.39-2017 | IEEE Standard for Requirements for Distribution Transformer Tank Pressure Coordination |
| CSA C227.4 : 2006 | THREE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS |
| CSA C2.1 : 2006 | SINGLE-PHASE AND THREE-PHASE LIQUID-FILLED DISTRIBUTION TRANSFORMERS |
| CSA C301.1 : 2006 : R2011 | SINGLE-PHASE SUBMERSIBLE DISTRIBUTION TRANSFORMERS |
| CSA C22.2 No. 273 : 2014(R2019) | CABLEBUS |
| IEC 62271-111:2012 | High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE/IEC C37.60-2012 | IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE C57.12.44-2014 | IEEE Standard Requirements for Secondary Network Protectors |
| CSA C301.1 :2006 | SINGLE-PHASE SUBMERSIBLE DISTRIBUTION TRANSFORMERS |
| CAN/CSA-C227.3-06 (R2017) | Low-profile, single-phase, pad-mounted distribution transformers with separable insulated high-voltage connectors |
| CSA C199 : 2008 : R2012 | THREE-PHASE NETWORK DISTRIBUTION TRANSFORMERS |
| CSA C227.4 : 2006 : R2017 | THREE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS |
| CSA C227.5 : 2008 : R2013 | THREE-PHASE LIVE-FRONT PAD-MOUNTED DISTRIBUTION TRANSFORMERS |
| CSA C227.3 : 2006 : R2011 | LOW-PROFILE, SINGLE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS |
| IEEE C57.12.34-2015 REDLINE | IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below |
| CSA C2.1 : 2006 : R2011 | SINGLE-PHASE AND THREE-PHASE LIQUID-FILLED DISTRIBUTION TRANSFORMERS |
| CSA C227.5:2008 | THREE-PHASE LIVE-FRONT PAD-MOUNTED DISTRIBUTION TRANSFORMERS |
| CSA C227.4 : 2006 : R2011 | THREE-PHASE, PAD-MOUNTED DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS |
| C88-16 | Power transformers and reactors |
| IEEE C57.12.31-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
| PIP ELSTR01 : 2016 | DESIGN AND FABRICATION OF LIQUID-IMMERSED SUBSTATION POWER TRANSFORMERS, 750 KVA AND ABOVE, THREE PHASE |
| IEEE C37.62-2020 | IEEE Standard for Pad-Mounted Dry Vault, Submersible, and Overhead Fault Interrupters for Alternating Current Systems Up to and Including 38 kV |
| IEEE C57.12.34-2022 | IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below |
| IEEE C37.74-2014 | IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| IEEE C37.75-2023 | IEEE Standard for Pad-Mounted, Pole-Mounted, and Submersible Switchgear Enclosures and Associated Control Enclosures--Coastal and Non-Coastal Environmental Integrity |
| IEEE C57.12.32-2002 | IEEE Standard for Submersible Equipment - Enclosure Integrity |
| SAE J 400 : 2012 | TEST FOR CHIP RESISTANCE OF SURFACE COATINGS |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| IEEE C57.12.35-2013 REDLINE | IEEE Standard Bar Coding for Distribution Transformers and Step-Voltage Regulators |
| IEEE C57.12.24-2009 | IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below |
| IEEE C57.12.30-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE C57.12.38-2014 | IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| IEEE C57.12.29-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| ASTM D 4587 : 2011 : REDLINE | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| IEEE C57.12.20-2011 REDLINE | IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| IEEE C57.12.31-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
| IEEE C57.12.23-2009 | IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below |
| IEEE C57.12.34-2015 REDLINE | IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.