• Shopping Cart
    There are no items in your cart

IEEE C57.12.50 : 1981

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

REQUIREMENTS FOR VENTILATED DRY-TYPE DISTRIBUTION TRANSFORMERS, 1 TO 500 KVA, SINGLE-PHASE, AND 15 TO 500 KVA, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 120 TO 600 VOLTS

Withdrawn date

17-10-2023

Published date

01-01-1981

Sorry this product is not available in your region.

1. Scope
    1.1
    1.2
    1.3
    1.4
    1.5
2. Related Standards and Guides
    2.1 General
    2.2 Terminology
    2.3 Revision of American National Standards Referred
         to in This Document
Part I: Basic Electrical and Mechanical Requirements
3. Usual Service Conditions
4. Ratings and Characteristics
    4.1 Kilovolt-Ampere Ratings
    4.2 Kilovolt-Ampere and Voltage Ratings
    4.3 Taps
    4.4 Insulation Levels
    4.5 Polarity, Angular Displacement, and Terminal
         Markings
    4.6 Impedance Voltage
5. Construction
    5.1 Insulation System
    5.2 Accessory Location
    5.3 Nameplate
    5.4 Transformer Connections
    5.5 Tap Changing
    5.6 Lifting Facilities and Stability
    5.7 Grounding Facilities
    5.8 Transformer Enclosure
6. Routine Tests
7. Tolerances
Part II: Other Requirements or Alternatives That May Be
         Specified for Some Applications
8. Other Ratings and Characteristics
    8.1 Other Kilovolt-Ampere Ratings
    8.2 40 degree C Average Ambient Temperature
         Conditions
    8.3 Other Winding Temperature Rises
    8.4 Other Insulation Systems
    8.5 Other High-Voltage Ratings and Connections
    8.6 Y-Y Connected Transformers
    8.7 Increased Neutral Insulation
    8.8 Other Basic Lightning impulse Insulation Levels
         (BILs)
9. Other Construction
    9.1 High-Voltage Connection Arrangements
    9.2 Low-Voltage Connection Arrangements
    9.3 Surge Arresters
    9.4 Unit Substation
    9.5 Temperature Devices
    9.6 Forced-Air Cooling
    9.7 Provision for Future Forced-Air Cooling
    9.8 Space Heaters
    9.9 Current Transformers (or Provision for Their
         Addition in the Future)
    9.10 Terminal Blocks
    9.11 Contacts
    9.12 Jacking and Moving Facilities
10. Other Tests

Defines characteristics relating to performance, limited mechanical and electrical interchangeability, and safety of the equipment described, and to assist in the proper selection of such equipment.

DocumentType
Standard
PublisherName
Institute of Electrical & Electronics Engineers
Status
Withdrawn

IEEE C57.94-1982 IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
IEEE C57.12.51-2008 IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements
IEEE DRAFT C57.12.91 : D3 2000 DRAFT STANDARD TEST CODE FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
ANSI C57.12.52 : 2012 Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
NEMA TR1 : 2013 TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS
IEEE DRAFT C57.12.01 : D6 2005 GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS INCLUDING THOSE WITH SOLID-CAST AND/OR RESIN ENCAPSULATED WINDINGS
ANSI C57.12.57 : 1987 AMERICAN NATIONAL STANDARD FOR TRANSFORMERS - VENTILATED DRY-TYPE NETWORK TRANSFORMERS 2500 KVA AND BELOW, THREE-PHASE, WITH HIGH-VOLTAGE 34500 VOLTS AND BELOW, LOW-VOLTAGE 216Y/125 AND 480Y/227 VOLTS - REQUIREMENTS
IEEE C37.121-2012 GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
IEEE C57.12.52-2012 IEEE Standard for Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
IEEE C57.12.91-2011 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE C57.12.70-2011 IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
IEEE C57.12.56-1986 IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers
IEEE C37.121-2012 REDLINE IEEE Guide for Switchgear - Unit Substation - Requirements

IEEE C57.12.51-2008 REQUIREMENTS FOR SEALED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND LARGER, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 208Y/120 TO 4160 VOLTS
IEEE C57.12.01-2015 REDLINE IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
ANSI C57.12.52 : 2012 Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEEE C57.12.70-2011 IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
IEEE C57.12.91-2011 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE C57.94-1982 IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
IEEE C57.105-1978 IEEE Guide for Application of Transformer Connections in Three-Phase Distribution Systems

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.