Skip to content
Please enter a keyword to search

  • IEEE C95.1-2005

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz

    Available format(s):  PDF

    Superseded date:  07-08-2021

    Language(s):  English

    Published date:  19-04-2006

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Overview
      1.1 Scope
      1.2 Purpose
      1.3 Introduction
    2 References
    3 Definitions, acronyms, abbreviations, and letter symbols
      3.1 Definitions
      3.2 Abbreviations
      3.3 Letter symbols for quantities
      3.4 Unit symbols
    4 Recommendations
      4.1 Basic restrictions (BRs) and maximum permissible
          exposures (MPEs) for 3 kHz - 5 MHz
      4.2 BRs and MPEs for frequencies between 100 kHz and 3 GHz
      4.3 BRs for frequencies between 3 GHz and 300 GHz
      4.4 MPEs for frequencies between 100 kHz and 300 GHz
      4.5 Suggested limit for contact voltage to protect against
          RF burns
      4.6 Relaxation of the power density MPEs for localized
          exposures
      4.7 Assessing compliance with this standard
      4.8 RF safety programs
    Annex A (informative) Approach to revision of IEEE Std C95.1,
            1999 Edition
    Annex B (informative) Identification of levels of RF
            exposure responsible for adverse effects: summary
            of the literature
    Annex C (informative) Rationale
    Annex D (informative) Practical applications - examples
    Annex E (informative) Glossary
    Annex F (informative) Literature database
    Annex G (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    Presents recommendations to protect against established adverse health effects in human beings associated with exposure to electric, magnetic and electromagnetic fields in the frequency range of 3 kHz to 300 GHz.

    General Product Information - (Show below) - (Hide below)

    Committee International Committee on Electromagnetic Sa
    Development Note Supersedes IEEE DRAFT C95.1. (04/2006) Amendment 1 to IEEE C95.1 is available separately, see IEEE C95.1A. (04/2010) Supersedes IEEE C95.1B. (07/2010) This standard was just updated in our system however it was originally released on 04-2006
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-HDBK-240 Revision A:2011 HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE TEST GUIDE
    11/30216823 DC : 0 BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING
    BS EN 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
    ETR 357 : 20001
    MIL M 81927 : B MANUAL, TECHNICAL, GENERAL STYLE AND FORMAT OF (WORK PACKAGE CONCEPT)
    14/30316021 DC : 0 BS EN 62657-1 - INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
    IEEE 299-2006 IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
    13/30280457 DC : 0 BS EN 62493 - ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS
    CEI EN 50420 : 2007 BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ)
    I.S. EN 62232:2017 DETERMINATION OF RF FIELD STRENGTH, POWER DENSITY AND SAR IN THE VICINITY OF RADIOCOMMUNICATION BASE STATIONS FOR THE PURPOSE OF EVALUATING HUMAN EXPOSURE
    04/30118430 DC : DRAFT AUG 2004 EN 50420 - BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ)
    IEEE DRAFT 1309 : D2.0 2005 CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ
    11/30216820 DC : 0 BS ISO 17366 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT PACKAGING
    ISO 14117:2012 Active implantable medical devices Electromagnetic compatibility EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
    IEEE C95.2-1999 IEEE Standard for Radio-Frequency Energy and Current-Flow Symbols
    ISO/IEC TR 20017:2011 Information technology Radio frequency identification for item management Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators
    CEI EN 62479 : 2013 ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ - 300 GHZ)
    BS EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
    17/30355634 DC : 0 BS EN 62311 ED.2.0 - ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
    IEEE 139-1988 IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User\'s Premises
    MIL-STD-3001-1 Revision A:2014 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS)
    BS EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body General
    CSA ISO/IEC 18000-2 : 2010 : R2015 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 2: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ
    IEC 62479:2010 Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
    SAE J 2954 : 2017 WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
    EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
    I.S. EN 61566:1999 MEASUREMENT OF EXPOSURE TO RADIO-FREQUENCY ELECTROMAGNETIC FIELDS - FIELD STRENGTH IN THE FREQUENCY RANGE 100 KHZ TO 1 GHZ
    CSA ISO/IEC TR 20017:14 (R2019) Information technology - Radio frequency identification for item management - Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators (Adopted ISO/IEC TR 20017:2011, first edition, 2011-12-15)
    TS 102 497 : 1.1.1 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); DECT IN THE 1 920 MHZ TO 1 930 MHZ UNLICENSED PERSONAL COMMUNICATIONS SERVICES (UPCS) FREQUENCY BAND; SPECIFIC REQUIREMENTS
    IEC 61786-2:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements
    BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
    PD IEC/TS 62996:2017 Industrial electroheating and electromagnetic processing equipment. Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
    EN 62822-2:2016 Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment
    EN 61566:1997 Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz
    EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
    EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    EN 62657-1:2017 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
    EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic fields
    IEEE 1654:2009 RF PROTECTION OF PERSONNEL WORKING IN THE VICINITY OF WIRELESS COMMUNICATIONS ANTENNAS ATTACHED TO ELECTRIC POWER LINE STRUCTURES
    TR 101 640 : 7.0.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); GSM ELECTRO MAGNETIC COMPATIBILITY (EMC) CONSIDERATIONS
    BS ISO/IEC 24730-61:2013 Information technology. Real time locating systems (RTLS) Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    IEC TS 62997:2017 Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz
    11/30216817 DC : 0 BS ISO 17365 - SUPPLY CHAIN APPLICATIONS OF RFID - TRANSPORT UNITS
    CSA ISO/IEC 24730-5:14 (R2019) Information technology - Real-time locating systems (RTLS) - Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface (Adopted ISO/IEC 24730-5:2010, first edition, 2010-04-01)
    BS ISO/IEC 24730-62:2013 Information technology. Real time locating systems (RTLS) High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    06/30157890 DC : 0 BS EN 50496 - DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
    I.S. EN 62311:2008 ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
    DEFSTAN 05-74/2(2008) : 2008 GUIDE TO PRACTICAL SAFETY ASPECTS OF THE USE OF RADIO FREQUENCY ENERGY
    BS IEC 62233:2005 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
    13/30276624 DC : 0 BS EN 62704-1 ED 1.0 - RECOMMENDED PRACTICE FOR DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ -6 GHZ - PART 1: GENERAL REQUIREMENTS FOR USING THE FINITE DIFFERENCE TIME DOMAIN (FDTD) METHOD SAR CALCULATIONS
    12/30260111 DC : 0 BS ISO/IEC 24730-61 - INFORMATION TECHNOLOGY - REAL-TIME LOCATING SYSTEMS (RTLS) - PART 61: LOW RATE PULSE REPETITION FREQUENCY ULTRA WIDE BAND (UWB) AIR INTERFACE
    BS EN 45502-2-3:2010 Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems
    AAMI ISO 14117 : 2012 ACTIVE IMPLANTABLE MEDICAL DEVICES - ELECTROMAGNETIC COMPATIBILITY - EMC TEST PROTOCOLS FOR IMPLANTABLE CARDIAC PACEMAKERS, IMPLANTABLE CARDIOVERTER DEFIBRILLATORS AND CARDIAC RESYNCHRONIZATION DEVICES
    MIL-PRF-32006 Base Document:2004 PROGRAMMABLE CONTROLLER, NAVAL SHIPBOARD
    BS EN 50420:2006 Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz)
    CSA ISO/IEC 18000-2 : 2010 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 2: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ
    CSA ISO/IEC 18000-7 : 2010 : R2015 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ
    ISO/TS 10891:2009 Freight containers Radio frequency identification (RFID) Licence plate tag
    CEI EN 62233 : 2009 MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE
    TR 134 925 : 3.0.0 UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); SPECIFIC ABSORPTION RATE (SAR) REQUIREMENTS AND REGULATIONS IN DIFFERENT REGIONS
    ISO/IEC/IEEE 8802-15-3:2017 Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-3: High data rate wireless multi-media networks
    IEEE 1260-1996 IEEE Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
    ISO/IEC/IEEE 8802-11:2012 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
    CEI EN 62226-1 : 2006 EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 1: GENERAL
    ISO/IEC 24730-61:2013 Information technology — Real time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    ASTM F 3057 : 2016 : REDLINE Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
    IEC TS 62597:2011 Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure
    IEC 62822-2:2016 Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment
    EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
    IEC 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic fields
    MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
    BIS IS/ISO 14708-3 : 2008 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 3: IMPLANTABLE NEUROSTIMULATORS
    MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
    CEI EN 62311 : 2008 ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
    ISO 14708-7:2013 Implants for surgery Active implantable medical devices Part 7: Particular requirements for cochlear implant systems
    IEEE 299.1-2013 IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m
    04/300582 DC : DRAFT JAN 2004 ISO/IEC 8802-11 - INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 11: WIRELESS LAN MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL LAYER (PHY) SPECIFICATIONS
    IEC 62822-1:2016 Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 1: Product family standard
    BS ISO 17367:2013 Supply chain applications of RFID. Product tagging
    SAE J 1113/1 : 2013 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
    BS ISO/IEC 18000-2:2009 Information technology. Radio frequency identification for item management Parameters for air interface communications below 135 kHz
    08/30187614 DC : DRAFT SEP 2008 BS ISO/IEC 18000-7 - INFORMATION TECHNOLOGY AIDC TECHNIQUES - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - AIR INTERFACE - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ
    12/30253654 DC : 0 BS ISO/IEC 18000-7 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ
    IEEE DRAFT C95.2 : 1998 RADIO FREQUENCY ENERGY AND CURRENT FLOW SYMBOLS
    08/30176229 DC : DRAFT JAN 2008 BS EN 62493 - ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS - PRODUCT FAMILY STANDARD
    BS EN 61566:1998 Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz
    BS EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
    IEEE 802.15.3-2003 IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN)
    ISO 17366:2013 Supply chain applications of RFID — Product packaging
    IEEE C95.1-2345-2014 IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz
    EN 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
    BS ISO 14117:2012 Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
    ASTM E 1851 : 2015 : REDLINE Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
    AAMI PC69 : 2007
    ISO/IEC 18000-2:2009 Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz
    IEEE/ANSI C63.19-2011 REDLINE American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids
    EIA IS 648 : 1996 MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS
    ISO/IEC 24730-62:2013 Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    ISO 17365:2013 Supply chain applications of RFID — Transport units
    IEC TR 63167:2018 Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields
    IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
    ISO/TR 10305-2:2003 Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
    ISO/IEC 18000-7:2014 Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz
    I.S. EN 62226-1:2005 EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 1: GENERAL
    IEEE/ANSI C63.15-2010 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
    NASA STD 3000 VOL 2 : 1995 MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2
    NASA STD 3001 VOL 2 : 2015 NASA SPACE FLIGHT HUMAN-SYSTEM STANDARD - VOLUME 2: HUMAN FACTORS, HABITABILITY, AND ENVIRONMENTAL HEALTH
    NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
    UNI CEI EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    IEEE DRAFT 802.11MA : D7.0 2006 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 11: WIRELESS LAN MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL LAYER (PHY) SPECIFICATIONS
    MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
    BS IEC 62232:2011 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
    13/30270144 DC : 0 BS EN 62822-1 - PRODUCT FAMILY STANDARD FOR THE ASSESSMENT OF EQUIPMENT FOR RESISTANCE WELDING, ARC WELDING PROCESSES RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTOMAGNETIC FIELDS (0 HZ - 300 GHZ)
    IEEE 1309-2013 REDLINE IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
    PD IEC/TS 62997:2017 Industrial electroheating and electromagnetic processing equipment. Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz
    MIL-STD-462 Revision D:1993 MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS
    BS ISO/IEC 24730-5:2010 Information technology. Real-time locating systems (RTLS) Chirp spread spectrum (CSS) at 2,4 GHz air interface
    BS ISO 17365:2013 Supply chain applications of RFID. Transport units
    10/30208719 DC : 0
    BS EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure (IEC 62232:2017)
    BS IEC 61786-2:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Basic standard for measurements
    BS ISO 17366:2013 Supply chain applications of RFID. Product packaging
    BS EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
    IEC/IEEE 62704-1:2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 1: General requirements for using the finite difference time-domain (FDTD) method for SAR calculations
    AAMI ISO 14708-4 : 2008 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS
    CSA ISO/IEC 18000-7 : 2010 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ
    UNE-EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic Field
    ANSI C95.5 : 1981 RF AND MICROWAVE ELECTROMAGNETIC FIELDS, RECOMMENDED PRACTICE FOR MEASUREMENT OF HAZARDOUS,
    I.S. EN 62233:2008 MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE
    IEEE 475-2000 IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
    I.S. EN 62822-2:2016 ELECTRIC WELDING EQUIPMENT - ASSESSMENT OF RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (0 HZ TO 300 GHZ) - PART 2: ARC WELDING EQUIPMENT
    ISO 14708-4:2008 Implants for surgery Active implantable medical devices Part 4: Implantable infusion pumps
    ISO/IEC 8802-11:2005 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
    I.S. EN 62209-1:2016 MEASUREMENT PROCEDURE FOR THE ASSESSMENT OF SPECIFIC ABSORPTION RATE OF HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - PART 1: DEVICE USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ)
    ASTM F 3020 : 2016 Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security
    ISO 17364:2013 Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs)
    ISO 17367:2013 Supply chain applications of RFID — Product tagging
    IEC TR 62905:2018 Exposure assessment methods for wireless power transfer systems
    IEC 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
    IEC 62311:2007 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
    IEC 62657-1:2017 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
    IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
    IEC TS 62996:2017 Industrial electroheating and electromagnetic processing equipment - Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz
    UNE-EN 45502-2-3:2010 Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
    EN 45502-2-3:2010 Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
    IEEE C95.7-2014 IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz
    IEEE DRAFT C63.19 : 2005 METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS
    ECMA/TR 97 : 1ED 2009 GUIDE FOR ASSESSMENT OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM MULTIMEDIA PRODUCTS IN ACCORDANCE WITH IEC/EN 62311
    I.S. EN 62479:2010 ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ TO 300 GHZ)
    UNE-EN 62479:2011 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
    CEI EN 61566 : 1998 MEASUREMENT OF EXPOSURE TO RADIO-FREQUENCY ELECTROMAGNETIC FIELDS FIELD STRENGTH IN THE FREQUENCY RANGE 100 KHZ TO 1 GHZ
    BS EN 62822-2:2016 Electric welding equipment. Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Arc welding equipment
    12/30260114 DC : 0 BS ISO/IEC 24730-62 - INFORMATION TECHNOLOGY - REAL-TIME LOCATING SYSTEMS (RTLS) - PART 62: HIGH RATE PULSE REPETITION FREQUENCY ULTRA WIDE BAND (UWB) AIR INTERFACE
    PD IEC/TS 62657-1:2014 Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations
    BS ISO 17364:2013 Supply chain applications of RFID. Returnable transport items (RTIs) and returnable packaging items (RPIs)
    BS EN 62493:2015 Assessment of lighting equipment related to human exposure to electromagnetic field
    IEC 62233:2005 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
    IEEE C95.2-1999 RADIO-FREQUENCY ENERGY AND CURRENT-FLOW SYMBOLS
    14/30270135 DC : 0 BS EN 62822-2 ED1.0 - ASSESSMENT OF ELECTRIC WELDING EQUIPMENT RELATED TO RESTRICTIONS OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (0 HZ 300 GHZ) - PART 2: BASIC STANDARD FOR ARC WELDING
    11/30216814 DC : 0 BS ISO 17364 - SUPPLY CHAIN APPLICATIONS OF RFID - RETURNABLE TRANSPORT ITEMS (RTIS)
    BS ISO/IEC 18000-7:2014 Information technology. Radio frequency identification for item management Parameters for active air interface communications at 433 MHz
    AAMI ISO 14708-4:2008(R2011) IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS
    CEI 211-7 : 2001 GUIDE FOR THE MEASUREMENT AND THE EVALUATION OF ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE 10 KHZ - 300 GHZ, WITH REFERENCE TO THE HUMAN EXPOSURE
    ANEP-45 : 0
    IEEE 1528-2013 REDLINE IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
    SAE J1113/4 : 2014 IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - BULK CURRENT INJECTION (BCI) METHOD
    IEEE C95.3-2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz
    BS EN 62657-1:2017 Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations
    IEEE 1560-2005 IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz
    ANSI/ASSE A10.48 : 2016 CRITERIA FOR SAFETY PRACTICES WITH THE CONSTRUCTION, DEMOLITION, MODIFICATION AND MAINTENANCE OF COMMUNICATION STRUCTURES
    I.S. EN 62657-1:2017 INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
    I.S. EN 45502-2-3:2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    ISO/IEC 24730-5:2010 Information technology — Real-time locating systems (RTLS) — Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface
    I.S. EN 50420:2006 BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ)
    AAS3P-10 : 2011 SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS
    IEEE DRAFT 299 : 0 METHOD FOR MEASURING THE EFFECTIVENESS OF ELECTROMAGNETIC SHIELDING ENCLOSURES
    I.S. EN 62493:2015 ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS
    ASTM F 3278 : 2017 Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security
    I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
    IEC/IEEE 62704-3:2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 3: Specific requirements for using the finite difference time domain (FDTD) method for SAR calculations of mobile phones
    IEC 62226-1:2004 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General
    EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General
    EN 62233:2008/corrigendum Aug. 2008 MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE
    EN 50420:2006 Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz)
    IEEE 1688-2015 IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules
    IEEE 802.11-2012 IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
    IEEE C63.19-2007 American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless Communications
    IEEE C95.7-2005 IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz

    Standards Referencing This Book - (Show below) - (Hide below)

    AAMI PC69 : 2007
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    IEEE C95.7-2014 IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz
    CFR 47(PTS0-19) : OCT 2017 TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION
    ASHRAE HDBK FUNDAMENTALS : 2013 ASHRAE HANDBOOK - FUNDAMENTALS
    IEEE C95.3-2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz
    IEC 60601-1-2:2014 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
    ANSI Z136.1 : 2014 SAFE USE OF LASERS
    ISO 7730:2005 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
    EN 50383 : 2010 COR 2013 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
    CFR 47(PTS20-39) : OCT 2017 TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION
    IEEE C95.6-2002 IEEE Standard for Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz
    IEEE C95.7-2005 IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz
    ASHRAE 55 : 2017 THERMAL ENVIRONMENTAL CONDITIONS FOR HUMAN OCCUPANCY
    CFR 47(PTS80-END) : OCT 2017 TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective