ISO 10517:2009
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Powered hand-held hedge trimmers Safety
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-02-2019
17-07-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 10517:2009 specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades.
It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
It deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended.
It does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor to hedge trimmers manufactured before the date of its publication.
| DevelopmentNote |
DRAFT ISO/DIS 10517 is also available for this standard. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN ISO 10517 : 2010 AMD 1 2013 | Identical |
| NS EN ISO 10517 : 2009 AMD 1 2013 | Identical |
| DS EN ISO 10517 : 2009 AMD 1 2013 | Identical |
| BS EN ISO 10517 : 2009 | Identical |
| NF EN ISO 10517 : 2009 AMD 1 2013 | Identical |
| PN EN ISO 10517 : 2012 AMD 1 2014 | Identical |
| NEN EN ISO 10517 : 2009 AMD 1 2013 | Identical |
| UNE-EN ISO 10517:2010 | Identical |
| DIN EN ISO 10517:2014-03 | Identical |
| NBN EN ISO 10517 : 2009 AMD 1 2013 | Identical |
| ONORM EN ISO 10517 : 2014 | Identical |
| UNI EN ISO 10517 : 2014 | Identical |
| I.S. EN ISO 10517:2009 | Identical |
| UNI CEN/TR 15350 : 2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| CEN/TR 15350:2013 | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| PD CEN/TR 15350:2013 | Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| S.R. CEN/TR 15350:2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| UNE-CEN/TR 15350:2013 IN | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 5347-22:1997 | Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods |
| ISO 3767-3:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 3: Symbols for powered lawn and garden equipment |
| ISO 8893:1997 | Forestry machinery Portable brush-cutters and grass-trimmers Engine performance and fuel consumption |
| EN 774:1996/A3:2001 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| ISO 7293:1997 | Forestry machinery Portable chain saws Engine performance and fuel consumption |
| ISO 3767-4:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 4: Symbols for forestry machinery |
| ISO 11820:1996 | Acoustics — Measurements on silencers in situ |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 8662-1:1988 | Hand-held portable power tools Measurement of vibrations at the handle Part 1: General |
| IEC 60745-2-15:2006+AMD1:2009 CSV | Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.