• There are no items in your cart

ISO 10896-2:2016

Current

Current

The latest, up-to-date edition.

Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

16-02-2016

ISO 10896-2:2016 specifies general safety requirements for slewing rough-terrain variable-reach trucks (hereafter known as "trucks"), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g., carriage and fork arms) is typically fitted. Fork arms and other integrated attachments are considered to be parts of the truck.

Other standards, in addition to the relevant provisions of this part of ISO 10896, can apply to the attachments.

ISO 10896-2:2016 is not applicable to the following:

a) rough terrain variable-reach trucks covered by ISO 10896‑1 (non-slewing);

b) industrial variable-reach trucks covered by ISO 3691‑2;

c) mobile cranes;

d) machines designed primarily for earth-moving, such as loaders, even if their buckets are replaced by fork arms (see ISO 20474);

e) trucks designed primarily with variable-length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions;

NOTE Additional requirements for trucks intended for freely swinging load applications, their lifting devices and attachments, and personnel/work platform applications on trucks, are being developed by ISO/TC 110/SC4.

f) trucks designed primarily for container handling.

The significant hazards covered by this part of ISO 10896 are listed in Annex A. This part of ISO 10896 does not address hazards that can occur

- during manufacture,

- when handling suspended loads, which may swing freely,

- when lifting personnel,

- when using trucks on public roads,

- when operating in potentially explosive atmospheres, or

- with a battery, LPG or hybrid as the primary power source.

DevelopmentNote
Supersedes ISO/DIS 10896-2. (02/2016)
DocumentType
Standard
Pages
47
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
BS ISO 10896-2:2016 Identical

13/30285135 DC : 0 BS ISO 11525-2 - ROUGH-TERRAIN TRUCKS - USER REQUIREMENTS - PART 2: SLEWING VARIABLE-REACH TRUCKS
14/30314218 DC : 0 BS ISO 10896-6 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: TILTING OPERATOR'S CABS
13/30282715 DC : 0 BS ISO 11525-5 - ROUGH-TERRAIN TRUCKS - USER REQUIREMENTS - PART 5: INTERFACE BETWEEN ROUGH-TERRAIN TRUCK AND INTEGRATED PERSONNEL WORK PLATFORM

ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
ISO 13284:2003 Fork-lift trucks — Fork-arm extensions and telescopic fork arms — Technical characteristics and strength requirements
ISO 10532:1995 Earth-moving machinery Machine-mounted retrieval device Performance requirements
EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
ISO 10896-6:2015 Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs
ISO 10263-5:2009 Earth-moving machinery Operator enclosure environment Part 5: Windscreen defrosting system test method
ISO 4302:2016 Cranes — Wind load assessment
ISO 11525-1:2012 Rough-terrain trucks - User requirements Part 1: General requirements
ISO 10570:2004 Earth-moving machinery — Articulated frame lock — Performance requirements
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 15817:2012 Earth-moving machinery — Safety requirements for remote operator control systems
ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
ISO 3691-2:2016 Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO 6683:2005 Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
ISO 6405-2:2017 Earth-moving machinery Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories
ISO 22915-20:2008 Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 22915-10:2008 Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
ISO 5010:2007 Earth-moving machinery Rubber-tyred machines Steering requirements
ISO 16528-2:2007 Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528-1
ISO 21507:2010 Earth-moving machinery Performance requirements for non-metallic fuel tanks
ISO 11525-2:2015 Rough-terrain trucks User requirements Part 2: Slewing variable-reach trucks
ISO 12509:2004 Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices
ISO 10896-1:2012 Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks
ISO 22915-14:2010 Industrial trucks Verification of stability Part 14: Rough-terrain variable-reach trucks
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
ISO 10263-3:2009 Earth-moving machinery Operator enclosure environment Part 3: Pressurization test method
ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
ISO 22915-24:2015 Industrial trucks Verification of stability Part 24: Slewing variable-reach rough-terrain trucks
ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
ISO 3287:1999 Powered industrial trucks — Symbols for operator controls and other displays
ISO 15870:2000 Powered industrial trucks — Safety signs and hazard pictorials — General principles
ISO 2331:1974 Fork lift trucks Hook-on type fork arms Vocabulary
ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 2328:2011 Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions
ISO 16528-1:2007 Boilers and pressure vessels — Part 1: Performance requirements
ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 6292:2008 Powered industrial trucks and tractors Brake performance and component strength
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
ISO 10263-4:2009 Earth-moving machinery Operator enclosure environment Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
ISO 2330:2002 Fork-lift trucks — Fork arms — Technical characteristics and testing
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
ISO 6016:2008 Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
ISO 2867:2011 Earth-moving machinery Access systems
ISO 9533:2010 Earth-moving machinery Machine-mounted audible travel alarms and forward horns Test methods and performance criteria
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
ISO 10968:2004 Earth-moving machinery Operator's controls
ISO 5053-1:2015 Industrial trucks Terminology and classification Part 1: Types of industrial trucks

View more information
€165.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.