• ISO 3864-2:2016

    Current The latest, up-to-date edition.

    Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  06-12-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 3864-2:2016 establishes additional principles to ISO 38641 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a product safety label is to alert persons to a specific hazard and to identify how the hazard can be avoided.

    ISO 3864-2:2016 is applicable to all products in all industries where safety-related questions can be posed. However, it is not applicable to safety labels used

    - for chemicals,

    - for the transport of dangerous substances and preparations and

    - in those sectors subject to legal regulations which differ from certain provisions of this document.

    The design principles incorporated in this document are intended to be used by all ISO Technical Committees and anyone designing product safety labels in the development of product safety label standards for their industries or services.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 145/SC 2
    Development Note Supersedes ISO/DIS 3864-2. (12/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
    DIN EN ISO 7010 E : 2012 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 6:2014)
    11/30214919 DC : 0 BS ISO 3864-3 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS
    14/30265073 DC : 0 BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    09/30183554 DC : 0 BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
    PREN 13236 : DRAFT 2017 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    I.S. EN 15494:2007 CANDLES - PRODUCT SAFETY LABELS
    14/30294816 DC : 0 BS EN 16713-1 - DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
    DIN EN ISO 11148-1:2012-06 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
    16/30338537 DC : 0 BS EN 131-3 - LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
    BS ISO 3864-1 : 2011 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
    08/30182786 DC : DRAFT JULY 2008 BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    BS ISO 24409-1:2010 SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, SAFETY-RELATED SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES
    BS EN ISO 11148-2 : 2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
    11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    10/30191403 DC : 0 BS EN 131-3 - LADDERS - PART 3: SAFETY INSTRUCTIONS AND USER INFORMATION
    UNI EN ISO 11148-2 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
    BS EN ISO 11148-1:2011 Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners
    UNI EN ISO 11148-7 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
    BS EN ISO 11148-11:2011 Hand-held non-electric power tools. Safety requirements Nibblers and shears
    18/30374371 DC : DRAFT MAY 2018 BS ISO 24409-1 - SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, FIRE CONTROL PLAN SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES
    CEN/CENELEC GUIDE 11 : 2012 PRODUCT INFORMATION RELEVANT TO CONSUMERS - GUIDELINES FOR STANDARD DEVELOPERS
    DIN ISO 3864-3:2012-11 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS (ISO 3864-3:2012)
    15/30264711 DC : 0 BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
    DIN EN ISO 11148-4:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
    12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    BS EN ISO 11148-3 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
    BS EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
    14/30302355 DC : 0 BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
    BS EN ISO 11148-8:2011 Hand-held non-electric power tools. Safety requirements Sanders and polishers
    13/30267665 DC : 0 BS EN ISO 24234 - DENTISTRY - DENTAL AMALGAM
    DIN EN ISO 11148-6:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
    09/30203792 DC : 0 BS ISO 7010 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
    BS EN 60601-2-57:2011 Medical electrical equipment Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    04/30118293 DC : DRAFT AUG 2004 ISO 3864-3 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3 - DESIGN CRITERIA FOR GRAPHICAL SYMBOLS USED IN SAFETY SIGNS
    PREN 13379 : DRAFT 2016 PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    09/30183551 DC : 0 BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
    BS EN 16740 : 2015 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
    15/30313587 DC : 0 BS ISO 25649-2 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
    UNI EN ISO 11148-1 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
    BS ISO 20474-1:2017 Earth-moving machinery. Safety General requirements
    UNE-EN 15649-2:2010 Floating leisure articles for use on and in the water - Part 2: Consumer information
    ISO 13578:2017 Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
    BS ISO 19027:2016 Design principles for communication support board using pictorial symbols
    14/30302903 DC : 0 BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
    NBR 16200 : 2013 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES - SAFETY REQUIREMENTS FOR CONSTRUCTION AND INSTALLATION OF LIFTS
    17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
    DIN EN 16740:2016-04 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
    09/30211248 DC : 0 BS EN 16029 - RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES
    DIN EN 12413:2011-05 SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
    10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
    16/30337092 DC BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
    BS ISO 17080 : 2005 MANUALLY PORTABLE AGRICULTURAL AND FORESTRY MACHINES AND POWERED LAWN AND GARDEN EQUIPMENT - DESIGN PRINCIPLES FOR SINGLE-PANEL PRODUCT SAFETY LABELS
    PREN 13289 : DRAFT 2015 PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    BS ISO 7010 : 2011 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
    08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    UNE-EN 16029:2013 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods
    08/30183842 DC : DRAFT JUNE 2008 BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
    BS ISO 9244 : 2008 EARTH-MOVING MACHINERY - MACHINE SAFETY LABELS - GENERAL PRINCIPLES
    08/30183838 DC : DRAFT JUNE 2008 BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
    03/105714 DC : DRAFT MAR 2003 ISO 24234 - DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM
    BS EN 16029 : 2012 RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
    ISO 25649-2:2017 Floating leisure articles for use on and in the water Part 2: Consumer information
    ISO 12643-1:2009 Graphic technology Safety requirements for graphic technology equipment and systems Part 1: General requirements
    BS EN ISO 7010 : 2012 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011)
    BS EN ISO 11148-12 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
    BS ISO 20749 : 2017 DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM
    10/30238615 DC : DRAFT NOV 2010 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    16/30277014 DC : DRAFT MAR 2016 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    11/30236586 DC : 0 BS EN 16230-1 - LEISURE KART - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    DIN EN ISO 11148-7:2013-01 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
    EN 474-1:2006+A5:2018 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
    BS EN ISO 25649-2:2017 Floating leisure articles for use on and in the water Consumer information
    10/30205791 DC : 0 BS ISO 10896-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
    BS EN 13236 : 2010 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    BS EN 82079-1 : 2012 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
    09/30197377 DC : 0 BS ISO 3864-1 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
    15/30329716 DC BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
    DIN EN ISO 11148-9:2012-06 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
    VDI 4500-4 : 2011 TECHNICAL DOCUMENTATION - DOCUMENTATION PROCESS - PLANNING, LAYOUT, CREATION
    DIN ISO 3864-1:2012-06 Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings (ISO 3864-1:2011)
    CSA C22.2 No. 60601-2-57 : 2011 : R2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    BS EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN ISO 11148-4:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
    DIN EN 15649-2:2013-07 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
    16/30354071 DC : 0 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    BS ISO 3864-3:2012 (published 2012-03) Graphical symbols. Safety colours and safety signs Design principles for graphical symbols for use in safety signs
    UNI EN ISO 11148-12 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
    BS EN ISO 11148-6 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
    NBR IEC 60745-1 : 2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    08/30183566 DC : DRAFT JUNE 2008 BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
    BS EN ISO 11148-10 : 2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
    15/30281554 DC : 0 BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
    I.S. EN 16230-1:2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    15/30302205 DC : DRAFT FEB 2015 BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY
    DIN EN 16230-1:2015-04 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    17/30359229 DC : DRAFT SEP 2017 BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    I.S. EN 82079-1:2012 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV))
    UNE 68112:2016 Agricultural and forestry machinery. Ride-on self-propelled work equipment. Deployment principles and assessment of automatically deployed roll over protective structures
    I.S. EN ISO 11148-9:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
    CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    BS EN ISO 11148-5:2011 Hand-held non-electric power tools. Safety requirements Rotary percussive drills
    UNI EN ISO 10821 : 2010 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
    DIN EN ISO 11148-3:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
    UNI EN ISO 11148-5 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
    UNI EN ISO 11148-6 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
    DIN EN ISO 11148-11:2012-06 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
    06/30148660 DC : DRAFT APR 2006 ISO 9244 - EARTH-MOVING MACHINERY - SAFETY SIGNS - GENERAL PRINCIPLES
    BS EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    DIN EN 16029:2012-08 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods
    BIS IS/ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    UNE-EN 16740:2016 Emission safety of combustible air fresheners - User safety information
    BS EN 15649-2 : 2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
    13/30278752 DC : 0 BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    BS ISO 23273-3 : 2006 FUEL CELL ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: PROTECTION OF PERSONS AGAINST ELECTRIC SHOCK
    BS EN ISO 11148-7 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
    DIN EN 16713-1:2016-08 DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
    UNI EN ISO 11148-8 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
    UNE-EN 16713-1:2017 Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods
    15/30330735 DC : 0 BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
    BS EN 60745-1 : 2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    18/30368743 DC (published 2018-04) BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
    BS ISO 10896-2:2016 (published 2016-02) Rough-terrain trucks. Safety requirements and verification Slewing trucks
    PREN ISO 24234 : DRAFT 2013 DENTISTRY - DENTAL AMALGAM (ISO/DIS 24234:2013)
    BS EN ISO 11148-9:2011 Hand-held non-electric power tools. Safety requirements Die grinders
    15/30301929 DC : 0 BS ISO 19027 - DESIGN PRINCIPLES FOR COMMUNICATION SUPPORT BOARD USING PICTORIAL SYMBOLS
    PREN 474-1 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 80416-3 : 2003 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
    BS EN ISO 11148-4 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
    ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
    ISO/IEC Guide 14:2018 Products and related services Information for consumers
    12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    09/30165797 DC : 0 BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    BS EN 16713-1 : 2016 DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
    08/30189962 DC : 0 BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
    UNE 23032:2015 Fire safety. Graphical symbols for use on plans: design, protection plans and evacuation plans.
    08/30189270 DC : 0 BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    07/30163456 DC : 0 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA Z1002 : 2012 : INC : UPD 2 : 2014 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
    ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    CSA Z1002 : 2012 : INC : UPD 1 : 2013 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
    PREN 12309-2 : DRAFT 2013 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    EN IEC 61204-7 : 2018 LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS (IEC 61204-7:2016)
    PREN 131-3 : DRAFT 2016 LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
    UNE-EN ISO 25649-2:2018 Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2017)
    CSA Z1002 : 2012 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
    09/30176666 DC : 0 BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION
    CEI EN 82079-1 : 2013 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
    16/30328610 DC : 0 BS ISO 20749 - DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM
    DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    DIN EN ISO 11148-2:2012-06 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
    DIN EN ISO 11148-5:2012-06 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
    CAN/CSA-Z1002-12 (R2017) Occupational health and safety - Hazard identification and elimination and risk assessment and control
    UNI EN 16029 : 2012 RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 16774:2016 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
    NBR 16083 : 2012 MAINTENANCE FOR LIFTS, ESCALATORS AND PASSENGER CONVEYORS - RULES FOR MAINTENANCE INSTRUCTIONS
    DIN EN ISO 11148-10:2012-06 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
    DIN EN ISO 11148-8:2012-06 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
    BS EN 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    ISO 23273-3:2006 Fuel cell road vehicles Safety specifications Part 3: Protection of persons against electric shock
    DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60947-5-5:1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
    SAE J 115 : 2018 SAFETY SIGNS FOR OFF-ROAD WORK MACHINES
    ISO/IEC Guide 37:2012 Instructions for use of products by consumers
    UNI EN ISO 11148-11 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
    UNI EN 15649-2 : 2013 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
    CEI EN 62368-1 : 2016 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    ISO 18758-2:2018 Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 2: Safety requirements
    I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN ISO 11148-10:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
    ISO 11148-13:2017 Hand-held non-electric power tools Safety requirements Part 13: Fastener driving tools
    I.S. EN ISO 11148-8:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
    I.S. EN ISO 11148-11:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
    I.S. EN ISO 11148-7:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
    NBR ISO 24234 : 2017 DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM
    PREN 13378 : DRAFT 2016 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    ISO 17840-4:2018 Road vehicles Information for first and second responders Part 4: Propulsion energy identification
    BS EN 60947-5-5:1998 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
    UNI EN ISO 11148-4 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
    ISO 19027:2016 Design principles for communication support board using pictorial symbols
    UNI EN ISO 11148-9 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
    I.S. EN ISO 11148-12:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
    I.S. EN ISO 11148-2:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
    I.S. EN 60601-2-57:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    UNI 11023 : 2011 SELF LOADING MOBILE MIXERS - SAFETY REQUIREMENTS
    BS EN 16230-1 : 2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    I.S. EN 16740:2015 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
    I.S. EN ISO 11148-1:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
    I.S. EN ISO 7010:2012 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011)
    I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
    I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
    UNI EN ISO 11148-3 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
    I.S. EN 16774:2016 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
    I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ISO 20749:2017 Dentistry Pre-capsulated dental amalgam
    I.S. EN 16029:2012 RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN IEC 61204-7:2018 LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
    I.S. EN ISO 11148-6:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
    DIN EN ISO 7010:2012-10 GRAPHISCHE SYMBOLE - SICHERHEITSFARBEN UND SICHERHEITSZEICHEN - REGISTRIERTE SICHERHEITSZEICHEN (ISO 7010:2011/AMD 5:2014)
    ISO 10896-2:2016 Rough-terrain trucks Safety requirements and verification Part 2: Slewing trucks
    ISO/IEC Guide 41:2003 Packaging Recommendations for addressing consumer needs
    DIN EN 13236:2016-05 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    NBR ISO/CIE 8995-1 : 2013 LIGHTING OF WORK PLACES - PART 1: INDOOR
    ISO 17846:2004 Welding and allied processes Health and safety Wordless precautionary labels for equipment and consumables used in arc welding and cutting
    UNI EN ISO 11148-10 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
    EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
    NBR IEC 60601-2-57 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    17/30364338 DC : 0 BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
    BS EN 474-1:2006+A6:2019 (published 2019-11) Earth-moving machinery. Safety General requirements
    CSA C22.2 No. 60601-2-57:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    I.S. EN ISO 11148-5:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
    UNE-EN 82079-1:2015 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
    I.S. EN ISO 25649-2:2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION (ISO 25649-2:2017)
    I.S. EN 13236:2010 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    BS EN 809:1998+A1:2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    EN 131-3:2018 LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
    PD ISO/IEC GUIDE 37:2012 Instructions for use of products by consumers
    16/30333438 DC : 0 BS ISO 20297-1 - INDUSTRIAL TRUCKS - LORRY-MOUNTED TRUCKS - PART 1: SAFETY REQUIREMENTS AND VERIFICATION
    DIN EN ISO 11148-12:2013-05 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
    ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
    I.S. EN 16713-1:2016 DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS
    BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
    I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN 16740 E : 2016 EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION
    BS EN 15494 : 2007 CANDLES - PRODUCT SAFETY LABELS
    EN ISO 25649-2 : 2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION (ISO 25649-2:2017)
    UNI EN 15494 : 2008 CANDLES - PRODUCT SAFETY LABELS
    ISO 3864-3:2012 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
    EN 13236:2010+A1:2015 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    ISO 17080:2005 Manually portable agricultural and forestry machines and powered lawn and garden equipment Design principles for single-panel product safety labels
    ISO 24409-1:2010 Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 1: Design principles
    ISO 10896-1:2012 Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks
    I.S. EN 15649-2:2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
    I.S. EN 80416-3:2002 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
    I.S. EN 60745-1:2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 11148-3:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
    IEC 61204-7:2016 EXV LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
    IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
    ISO 20474-1:2017 Earth-moving machinery — Safety — Part 1: General requirements
    I.S. EN 131-3:2018 LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
    I.S. EN 12413:2007 SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
    CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    EN ISO 7010 : 2012 AMD 7 2017 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
    DIN EN 1929-2:2005-03 Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors; German version EN 1929-2:2004
    DIN EN 1777:2010-06 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
    DIN EN 1929-4:2005-07 BASKET TROLLEYS - PART 4: REQUIREMENTS AND TESTS FOR BASKET TROLLEYS WITH ADDITIONAL GOODS CARRYING FACILITY(IES), WITH OR WITHOUT A CHILD CARRYING FACILITY, INTENDED TO BE USED ON PASSENGER CONVEYORS
    UNE-EN ISO 24234:2015 Dentistry - Dental amalgam (ISO 24234:2015)
    EN 12309-2:2015/AC:2015 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    UNI EN 12413 : 2011 SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
    DIN EN ISO 11161:2010-10 Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007 + Amd 1:2010); German version EN ISO 11161:2007 + A1:2010
    DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
    DIN EN 13977:2011-04 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
    DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    DIN EN ISO 11553-2:2009-03 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
    DIN EN 536:2016-01 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
    UNE-EN 13977:2012 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
    BS EN 13743:2017 (published 2017-01) Safety requirements for coated abrasive products
    BS EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    BS EN IEC 61204-7:2018 Low-voltage switch mode power supplies Safety requirements
    07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
    IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
    BS EN 12309-2:2015 (published 2016-02) Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety
    12/30272980 DC : 0 BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ISO 11148-6:2012 Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners
    BS EN ISO 11161 : 2007 SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
    BS EN ISO 10821 : 2005 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
    ISO 11148-1:2011 Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners
    ISO 10821:2005 Industrial sewing machines Safety requirements for sewing machines, units and systems
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : FR HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNE-EN 62841-1:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
    18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
    BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
    BS EN 13379 : 2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 1777:2011 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
    IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
    BS EN 13378 : 2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    IEC 60745-1:2006 Hand-held motor-operated electric tools - Safety - Part 1: General requirements
    ISO 11148-3:2012 Hand-held non-electric power tools Safety requirements Part 3: Drills and tappers
    ISO 11148-12:2012 Hand-held non-electric power tools Safety requirements Part 12: Circular, oscillating and reciprocating saws
    CSA C22.2 No. 0.23 : 2015 GENERAL REQUIREMENTS FOR BATTERY-POWERED APPLIANCES
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 12413 : 2007 SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
    BS EN 1929-4:2005 Basket trolleys Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors
    BS EN 1777 : 2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
    CSA C22.2 No. 60745.1 : 2007 : R2012 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 13289 : 2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13977:2011 (published 2011-02) Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
    ISO 11148-2:2011 Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools
    ISO 11148-9:2011 Hand-held non-electric power tools Safety requirements Part 9: Die grinders
    CAN/CSA-C22.2 No. 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ISO 11148-8:2011 Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    IEC 80416-3:2002+AMD1:2011 CSV Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols
    ISO 11148-11:2011 Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears
    UNE-EN 60601-2-57:2012 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    CSA C22.2 No. 60745.1 : 2007 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN 12309-2:2016-04 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    BS EN 1929-2:2004 Basket trolleys Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors
    ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
    ISO 11148-5:2011 Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills
    ISO 24234:2015 Dentistry Dental amalgam
    IEC 60601-2-57:2011 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
    BS EN ISO 24234 : 2004 DENTISTRY - DENTAL AMALGAM
    IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
    BS EN ISO 11553-2:2008 (published 2008-12) Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices
    UNE EN 12413 : 0 SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
    ISO 11148-10:2011 Hand-held non-electric power tools Safety requirements Part 10: Compression power tools
    ISO 11148-7:2012 Hand-held non-electric power tools Safety requirements Part 7: Grinders
    UNE-EN 80416-3:2003 Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols
    BS EN 536:2015 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
    UL 60745-1 : 4 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
    ISO 11161:2007 Safety of machinery Integrated manufacturing systems Basic requirements
    UNE-EN 12309-2:2015 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety
    EN 82079-1 : 2012 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012)
    CSA C22.2 No. 60745.1 : 2007 (R2017) HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS ISO 22734-2 : 2011 HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    BS EN 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ISO 11148-4:2012 Hand-held non-electric power tools Safety requirements Part 4: Non-rotary percussive power tools
    BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    DIN EN 12309-2 E : 2016 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    OVE/ONORM EN 62282-3-100 : 2013 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
    EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 60745-1:2006 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
    UL 2595 : 2ED 2015 GENERAL REQUIREMENTS FOR BATTERY-POWERED APPLIANCES
    UNE-EN 60947-5-5:1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS. ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION.
    I.S. EN 13379:2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    EN 60947-5-5 : 1997 AMD 2 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
    I.S. EN 13743:2017 SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
    I.S. EN 13378:2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    I.S. EN 1777:2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
    I.S. EN ISO 11553-2:2008 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
    I.S. EN ISO 24234:2015 DENTISTRY - DENTAL AMALGAM (ISO 24234:2015)
    I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    DIN EN 13289:2013-05 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN ISO 10821:2013-02 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
    DIN EN 13378:2013-05 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12309-2:2015 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
    DIN EN ISO 24234:2015-08 DENTISTRY - DENTAL AMALGAM (ISO 24234:2015)
    DIN EN 13379:2013-05 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 536:2015 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
    I.S. EN 13977:2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    I.S. EN 13289:2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    EN 13379:2001+A1:2013 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
    EN 12413:2007+A1:2011 SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
    EN 13378:2001+A1:2013 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
    EN 13289:2001+A1:2013 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
    EN 80416-3:2002/A1:2011 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
    EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 11161:2007 SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
    EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    EN 60601-2-57 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
    UNE-EN 809:1999 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    DIN EN 13743:2017-04 SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
    EN 15649-2:2009+A2:2013 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 2: CONSUMER INFORMATION
    EN 16774 : 2016 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT