ISO 10993-2:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Biological evaluation of medical devices — Part 2: Animal welfare requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
03-11-2022
Superseded by
Language(s)
English, French
Published date
06-07-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 10993-2:2006 is aimed at those who commission, design and perform tests or evaluate data from animal tests undertaken to assess the biocompatibility of materials intended for use in medical devices, or of the medical devices themselves. It specifies the minimum requirements to be satisfied to ensure and demonstrate that proper provision has been made for the welfare of animals used in animal tests to assess the biocompatibility of materials used in medical devices.
ISO 10993-2:2006 also makes recommendations and offers guidance intended to facilitate future further reductions in the overall number of animals used, refinement of test methods to reduce or eliminate pain or distress in animals, and the replacement of animal tests by other scientifically valid means not requiring animal tests.
It applies to tests performed on living vertebrate animals, other than man, to establish the biocompatibility of materials or medical devices.
| DevelopmentNote |
Supersedes ISO/DIS 10993-2 (07/2006)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IS/ISO 10993 : Part 2 : 2006 | Identical |
| ONORM EN ISO 10993-2 : 2006 | Identical |
| DS EN ISO 10993-2 : 2006 | Identical |
| GOST R ISO 10993-2 : 2009 | Identical |
| NEN EN ISO 10993-2 : 2006 | Identical |
| I.S. EN ISO 10993-2:2006 | Identical |
| PN EN ISO 10993-2 : 2006 | Identical |
| SN EN ISO 10993-2 : 2006 | Identical |
| SS-EN ISO 10993-2 : 2006 | Identical |
| BS EN ISO 10993-2:2006 | Identical |
| EN ISO 10993-2:2006 | Identical |
| NF EN ISO 10993-2 : 2006 | Identical |
| UNE-EN ISO 10993-2:2007 | Identical |
| DIN EN ISO 10993-2:2006-10 | Identical |
| CSA ISO 10993-2 : 1997 | Identical |
| ANSI/AAMI/ISO 10993-2:2006(R2014) | Identical |
| SAC GB/T 16886.2 : 2000 | Identical |
| UNI EN ISO 10993-2 : 2006 | Identical |
| AAMI ISO 10993-2 : 2006 : R2010 | Identical |
| AAMI ISO 10993-2 : 2006 | Identical |
| ONORM EN ISO 10993-11 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| CSA ISO 10993-10 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SENSITIZATION |
| I.S. EN ISO 5840:2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| DD ISO/TS 10993-20:2006 | Biological evaluation of medical devices Principles and methods for immunotoxicology testing of medical devices |
| ANSI/AAMI/ISO 10993-3:2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY, AND REPRODUCTIVE TOXICITY |
| BS EN ISO 5840-2:2015 | Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes |
| ISO/TS 20993:2006 | Biological evaluation of medical devices Guidance on a risk-management process |
| 04/30103836 DC : DRAFT JUL 2004 | ISO 11979-5 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
| DIN EN ISO 12417-1:2016-02 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
| AAMI ISO 10993-11 : 2006 : R2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| BS ISO 18562-4:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Tests for leachables in condensate |
| 09/30140724 DC : 0 | BS ISO 26000 - GUIDANCE ON SOCIAL RESPONSIBILITY |
| 14/30295067 DC : 0 | BS EN ISO 16671 - OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY |
| 03/100426 DC : DRAFT JAN 2003 | BS EN ISO 10993-18 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| 00/561676 DC : DRAFT APRIL 2000 | DRAFT BS EN ISO 10993-3 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| ISO 10993-11:2017 | Biological evaluation of medical devices — Part 11: Tests for systemic toxicity |
| 11/30212473 DC : 0 | BS EN ISO 10993-3 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| 08/30187781 DC : DRAFT AUG 2008 | BS EN ISO 10993-16 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| AAMI ISO 10993-1 : 2009 : R2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| 06/30106186 DC : 0 | ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT SYSTEM |
| CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| ONORM EN ISO 5840-3 : 2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| BS EN ISO 10993-16:2017 | Biological evaluation of medical devices Toxicokinetic study design for degradation products and leachables |
| ANSI/AAMI/ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
| UNE-EN ISO 22442-1:2016 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
| I.S. EN ISO 10993-11:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY (ISO 10993-11:2006) |
| I.S. EN ISO 10993-16:2017 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES (ISO 10993-16:2010) |
| AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ISO 7405:2008 | Dentistry Evaluation of biocompatibility of medical devices used in dentistry |
| DIN EN ISO 11979-5:2010-11 | Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:2006) |
| DIN EN ISO 22442-1:2016-05 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
| EN ISO 10993-9:2009 | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
| BS EN ISO 10993-1 : 2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
| ISO 10993-9:2009 | Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products |
| BS EN ISO 22803:2005 | Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file |
| UNE-EN ISO 10993-6:2017 | Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2016) |
| ISO 9394:2012 | Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study with rabbit eyes |
| BS EN ISO 9394:2012 | Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes |
| UNE-EN ISO 16672:2016 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| BS EN ISO 10993-3:2014 | Biological evaluation of medical devices Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| EN 12011 : 1998 | INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| ONORM EN ISO 10993-10 : 2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION (ISO 10993-10:2010) |
| ANSI Z80.27 : 2014 | OPHTHALMICS - IMPLANTABLE GLAUCOMA DEVICES |
| ONORM EN ISO 11979-5 : 2010 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
| ONORM EN ISO 10993-1 : 2011 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| I.S. EN ISO 15798:2013 | OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES (ISO 15798:2013) |
| DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
| ISO/TS 22911:2016 | Dentistry Preclinical evaluation of dental implant systems Animal test methods |
| I.S. EN ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| 17/30344601 DC : 0 | BS EN ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| CSA ISO 26000 : 2016 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| AAMI ISO 12417-1 : 2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| 03/103026 DC : DRAFT JAN 2003 | BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| ANSI Z80.13 : 2007 | OPHTHALMICS - PHAKIC INTRAOCULAR LENSES |
| AAMI ISO 5840 : 2005 : R2010 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| 15/30290736 DC : 0 | BS EN ISO 10993-4 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| AAMI ISO 5840 :2005 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| UNI EN ISO 5840-3 : 2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
| ASTM D 6324 : 2011 | Standard Test Methods for Male Condoms Made from Polyurethane |
| BS EN ISO 10993-11:2009 | Biological evaluation of medical devices Tests for systemic toxicity |
| AAMI BE83 : 2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| I.S. EN ISO 12417-1:2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015) |
| ISO 18562-4:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate |
| BS ISO 26000:2010 | Guidance on social responsibility |
| ISO/TR 37137:2014 | Cardiovascular biological evaluation of medical devices — Guidance for absorbable implants |
| ONORM EN ISO 7405 : 2013 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008 + AMD 1:2013) |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| UNI EN ISO 10993-11 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
| DIN EN ISO 22803:2006-01 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) |
| DIN EN ISO 10993-18:2009-08 | Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005); German version EN ISO 10993-18:2009 |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN ISO 16672:2015-12 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| DIN EN ISO 9394:2013-01 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:2012) |
| BS EN ISO 10993-6:2016 | Biological evaluation of medical devices Tests for local effects after implantation |
| UNE-EN ISO 10993-10:2013 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| BS EN 1441:1998 | Medical devices. Risk analysis |
| BS EN ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Application of risk management |
| BS EN ISO 10993-9 : 2009-12 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| I.S. EN ISO 10993-6:2016 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION (ISO 10993-6:2016) |
| EN ISO 5840-2:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| I.S. EN ISO 22794:2009 | DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| UNI EN ISO 10993-18 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| I.S. EN ISO 9394:2012 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - DETERMINATION OF BIOCOMPATIBILITY BY OCULAR STUDY WITH RABBIT EYES (ISO 9394:2012) |
| I.S. EN ISO 22442-1:2015 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 1: APPLICATION OF RISK MANAGEMENT (ISO 22442-1:2015) |
| I.S. EN ISO 10993-3:2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY (ISO 10993-3:2014) |
| EN ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
| EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| I.S. EN ISO 10993-10:2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION (ISO 10993-10:2010) |
| I.S. EN ISO 16672:2015 | OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES (ISO 16672:2015) |
| OVE/ONORM EN 60601-1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| UNE-EN ISO 5840-2:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| ISO 10993-16:2017 | Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables |
| 11/30243462 DC : 0 | BS EN ISO 9394 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - DETERMINATION OF BIOCOMPATIBILITY BY OCULAR STUDY WITH RABBIT EYES |
| ISO 5910:2018 | Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices |
| 17/30343686 DC : 0 | BS EN ISO 7405 - DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY |
| BS EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products General requirements |
| BS ISO 27427:2013 | Anaesthetic and respiratory equipment. Nebulizing systems and components |
| AAMI ISO 10993-1:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| ANSI Z80.29 : 2015 | OPHTHALMICS - ACCOMODATIVE INTRAOCULAR LENSES |
| BS EN ISO 5840-3:2013 | Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques |
| 08/30178723 DC : DRAFT AUG 2008 | BS ISO 15798 - OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES |
| 03/101659 DC : DRAFT JAN 2003 | ISO 22803 - DENTISTRY - MEMBRANE MATERIALS FOR GUIDED TISSUE REGENERATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| ANSI/AAMI/ISO 22442-1:2016 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 1: APPLICATION OF RISK MANAGEMENT |
| DIN EN ISO 5840-2:2016-05 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| I.S. ISO 26000:2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| CSA ISO 10993-9 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| AAMI ISO 10993-10 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| ANSI/AAMI/ISO 10993-6:2016 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| I.S. EN ISO 5840-2:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| ANSI/AAMI/ISO TIR10993-20:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 20: PRINCIPLES AND METHODS FOR IMMUNOTOXICOLOGY TESTING OF MEDICAL DEVICES |
| EN ISO 10993-11:2009 | Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006) |
| I.S. EN ISO 7405:2009 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008) |
| ISO 16671:2015 | Ophthalmic implants — Irrigating solutions for ophthalmic surgery |
| ISO 15798:2013 | Ophthalmic implants Ophthalmic viscosurgical devices |
| BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
| I.S. EN ISO 16671:2015 | OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY (ISO 16671:2015) |
| ISO 10993-18:2005 | Biological evaluation of medical devices Part 18: Chemical characterization of materials |
| DIN EN ISO 22794:2009-11 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15) |
| DIN EN ISO 10993-3:2015-02 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY (ISO 10993-3:2014) |
| DIN EN ISO 10993-1:2010-04 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management system (ISO 10993-1:2009) |
| UNE-EN ISO 10993-3:2015 | Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014) |
| ISO 10993-3:2014 | Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| BS EN ISO 10993-18:2009 | Biological evaluation of medical devices Chemical characterization of materials |
| ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
| BS EN ISO 10993-10:2013 | Biological evaluation of medical devices Tests for irritation and skin sensitization |
| DIN EN ISO 10993-10:2014-10 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| ISO 22794:2007 | Dentistry Implantable materials for bone filling and augmentation in oral and maxillofacial surgery Contents of a technical file |
| I.S. EN ISO 10993-18:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS (ISO 10993-18:2005) |
| EN ISO 10993-18:2009 | Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005) |
| I.S. EN ISO 11979-5:2006 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
| EN ISO 11979-5:2006 | Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:2006) |
| I.S. EN ISO 10993-9:2009-12 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS (ISO 10993-9:2009) |
| UNI EN ISO 5840 : 2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| UNI EN ISO 10993-10 : 2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| ONORM EN ISO 15798 : 2013 AMD 1 2018 | OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES (ISO 15798:2013) |
| UNI EN ISO 10993-3 : 2015 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| CSA ISO 10993-11 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TEST FOR SYSTEMIC TOXICITY |
| BS EN ISO 7405 : 2008 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008) |
| UNI EN ISO 9394 : 2013 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - DETERMINATION OF BIOCOMPATIBILITY BY OCULAR STUDY WITH RABBIT EYES |
| UNI EN ISO 10993-1 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| I.S. EN 12011:1998 | INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| 14/30295064 DC : 0 | BS EN ISO 16672 - OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES |
| UNE-ISO 26000:2012 | Guidance on social responsibility |
| 11/30219211 DC : 0 | BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES |
| 14/30261590 DC : 0 | BS EN ISO 10993-6 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| 08/30170164 DC : DRAFT AUG 2008 | BS EN ISO 10993-10 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 27427 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| ANSI Z80.13 : 2007 : R2017 | OPHTHALMICS - PHAKIC INTRAOCULAR LENSES |
| UNE-EN ISO 12417-1:2016 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
| AAMI ISO 10993-16:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| AAMI BE78 : 2002 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND DELAYED TYPE HYPERSENSITIVITY |
| CSA ISO 10993-6 : 1997(R2009) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| ANSI/AAMI/ISO 10993-9:2009(R2014) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| I.S. EN ISO 25539-1:2017 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
| ASTM D 6324 : 2011 : R2017 | Standard Specification for Male Condoms Made from Polyurethane |
| DIN EN ISO 7405:2013-12 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008 + AMD. 1:2013) |
| ASTM F 2695 : 2012 : REDLINE | Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| UNI EN ISO 7405 : 2013 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY |
| BS EN ISO 16671 : 2015 | OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY |
| ISO/TS 10993-20:2006 | Biological evaluation of medical devices — Part 20: Principles and methods for immunotoxicology testing of medical devices |
| DIN EN ISO 10993-9:2010-04 | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
| BS EN ISO 11979-5:2006 | Ophthalmic implants. Intraocular lenses Biocompatibility |
| ISO 26000:2010 | Guidance on social responsibility |
| BS EN 12011:1998 | Instrumentation to be used in association with non-active surgical implants. General requirements |
| ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Part 1: Application of risk management |
| BS EN 30993-6:1995 | Biological evaluation of medical devices Tests for local effects after implantation |
| ISO 5840-3:2013 | Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques |
| ISO 16672:2015 | Ophthalmic implants Ocular endotamponades |
| UNE-EN ISO 9394:2013 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:2012) |
| ISO 11979-5:2006 | Ophthalmic implants Intraocular lenses Part 5: Biocompatibility |
| I.S. EN ISO 10993-1:2009+AC:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
| ISO 10993-10:2010 | Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
| ISO 5840-2:2015 | Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes |
| AAMI ISO 10993-4 : 2002 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| BS EN ISO 5840:2009 | Cardiovascular implants. Cardiac valve prostheses |
| ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements |
| UNE-EN ISO 10993-9:2010 | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
| BS EN 30993-3:1994 | Biological evaluation of medical devices Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| BS EN ISO 22794:2009 | Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file |
| EN ISO 10993-6:2016 | Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2016) |
| EN ISO 10993-10:2013 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| EN ISO 22803:2005 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) |
| EN 30993-6 : 1994 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| EN ISO 22794:2009 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15) |
| EN ISO 10993-3:2014 | Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014) |
| EN 30993-3 : 1993 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| EN ISO 9394:2012 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:2012) |
| EN 1441 : 1997 | MEDICAL DEVICES - RISK ANALYSIS |
| EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
| AAMI ISO 10993-9 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| ANSI/AAMI/ISO 10993-10:2010(R2014) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| UNE-EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| 16/30335531 DC : 0 | BS EN ISO 10993-16 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| PD ISO/TR 37137:2014 | Cardiovascular biological evaluation of medical devices. Guidance for absorbable implants |
| ANSI/AAMI BE83:2006(R2011) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| 07/30163763 DC : 0 | BS ISO 7405 - DENTISTRY - PRECLINICAL EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY - TEST METHODS FOR DENTAL MATERIALS |
| 16/30310949 DC : 0 | BS ISO 5910 - CARDIOVASCULAR IMPLANTS AND EXTRACOPOREAL SYSTEMS - CARDIAC VALVE REPAIR DEVICES |
| CSA ISO 5840 : 0 | CARDIOVASCULAR IMPLANTS - CARIDAC VALVE PROSTHESES |
| ANSI Z80.30 : 2010 | OPHTHALMICS - TORIC INTRAOCULAR LENSES |
| 07/30162839 DC : 0 | BS EN ISO 10993-9 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| 02/560790 DC : DRAFT FEB 2002 | BS EN ISO 16671 - OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY |
| ANSI Z80.13 : 2007 : R2012 | OPHTHALMICS - PHAKIC INTRAOCULAR LENSES |
| AAMI ISO 10993-16 : 2010 : R2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| ANSI Z80.12 : 2007 : R2017 | OPHTHALMICS - MULTIFOCAL INTRAOCULAR LENSES |
| ANSI Z80.12 : 2007 | OPHTHALMICS - MULTIFOCAL INTRAOCULAR LENSES |
| CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| UNE-EN ISO 16671:2016 | Ophthalmic implants - Irrigating solutions for ophthalmic surgery (ISO 16671:2015) |
| ONORM EN ISO 5840-2 : 2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| DIN EN ISO 10993-11:2015-12 (Draft) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| ISO Guide 82:2014 | Guidelines for addressing sustainability in standards |
| EN ISO 10993-16:2017 | Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2017) |
| UNI ISO 26000 : 2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| UNI EN ISO 22794 : 2009 | DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| CSA ISO 10993-3 : 1997 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| NF EN ISO 10993-1 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT SYSTEM PROCESS |
| ISO 27427:2013 | Anaesthetic and respiratory equipment — Nebulizing systems and components |
| DIN EN ISO 10993-6:2009-08 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION (ISO 10993-6:2016) |
| ISO 10993-6:2016 | Biological evaluation of medical devices Part 6: Tests for local effects after implantation |
| ISO 22803:2004 | Dentistry — Membrane materials for guided tissue regeneration in oral and maxillofacial surgery — Contents of a technical file |
| BS EN ISO 16672:2015 | Ophthalmic implants. Ocular endotamponades |
| DIN EN ISO 5840:2009-08 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| UNI EN ISO 10993-9 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| ONORM EN ISO 10993-9 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| DIN EN ISO 10993-11:2009-08 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| EN ISO 5840:2009 | Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) |
| DIN EN ISO 10993-6:2017-09 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION (ISO 10993-6:2016) |
| DIN EN ISO 10993-10:2003-02 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION (ISO 10993-10:2010) |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.