ISO 11148-13:2017
Current
The latest, up-to-date edition.
Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
23-11-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 11148-13:2017 specifies safety requirements for hand-held non-electric power tools (hereinafter referred to as "fastener driving tools") intended for installation of a fastener (see Annex B), forming a mechanical connection or attachment with the workpiece which are for example wood and wood-based materials, plastic materials, fibre materials (loose or compacted), cementitious materials, metals and combinations of these materials. The fastener driving tools for fasteners can be powered by compressed air or combustible gases (which may be ignited by a battery or accumulator) and the energy is transmitted to an impacted element by an intermediary component that does not leave the device. These tools are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-13:2017 is applicable to fastener driving tools in which energy is applied to a loaded fastener for the purpose of driving this into a workpiece.
ISO 11148-13:2017 is not applicable to fastener driving tools in which the energy for driving fasteners is drawn from powder-actuated cartridges, hydraulics or from any type of electrical supply.
ISO 11148-13:2017 does not deal with special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture.
ISO 11148-13:2017 deals with all significant hazards, hazardous situations or hazardous events relevant to fastener driving tools for fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.
NOTE ISO 80079?36 gives requirements for non-electrical equipment for potentially explosive atmospheres.
| Committee |
ISO/TC 118/SC 3
|
| DevelopmentNote |
Supersedes ISO/DIS 11148-13. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
45
|
| ProductNote |
THIS STANDARD IS IDENTICAL TO I.S. EN ISO 11148-13 : 2018
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| SS-EN ISO 11148-13:2018 | Identical |
| PN-EN ISO 11148-13:2019 | Identical |
| I.S. EN ISO 11148-13:2018 | Identical |
| NS-EN ISO 11148-13 : 2018 | Identical |
| NEN-EN-ISO 11148-13:2018 | Identical |
| ONORM EN ISO 11148-13 : 2019 06 15 | Identical |
| UNI EN ISO 11148-13:2019 | Identical |
| EN ISO 11148-13:2018 | Identical |
| DS/EN ISO 11148-13:2018 | Identical |
| DIN EN ISO 11148-13:2019-07 | Identical |
| UNE-EN ISO 11148 : 2018 | Identical |
| UNE-EN ISO 11148-13:2018 | Identical |
| BS EN ISO 11148-13:2018 | Identical |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 417:2012 | Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 80079-36:2016 | Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
| EN 12549:1999+A1:2008 | Acoustics - Noise test code for fastener driving tools - Engineering method |
| ISO 8662-11:1999 | Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools |
| ISO 11690-1:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| IEC 60745-2-16:2008 | Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers |
| ISO 5391:2003 | Pneumatic tools and machines Vocabulary |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| ISO 13732-3:2005 | Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces |
| ISO 15744:2002 | Hand-held non-electric power tools Noise measurement code Engineering method (grade 2) |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 3857-3:1989 | Compressors, pneumatic tools and machines — Vocabulary — Part 3: Pneumatic tools and machines |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.