• There are no items in your cart

ISO 13732-3:2005

Current

Current

The latest, up-to-date edition.

Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

05-12-2005

ISO 13732-3:2005 provides methods for the assessment of the risk of cold injury and other adverse effects when a cold surface is touched by bare-hand/finger skin. It provides ergonomics data for establishing temperature limit values for cold solid surfaces. The values established can be used in the development of special standards, where surface temperature limit values are required. Its data are applicable to all fields where cold solid surfaces cause a risk of acute effects: pain, numbness and frostbite, and are not limited to the hands but can be applied in general to the healthy human skin of male and female adults.

DevelopmentNote
Supersedes ISO/DIS 13732-3 (12/2005)
DocumentType
Standard
Pages
21
PublisherName
International Organization for Standardization
Status
Current

UNI EN ISO 11148-2 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
BS EN ISO 11148-1:2011 Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners
UNI EN ISO 11148-7 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN ISO 11148-11:2011 Hand-held non-electric power tools. Safety requirements Nibblers and shears
I.S. EN ISO 11079:2007 ERGONOMICS OF THE THERMAL ENVIRONMENT - DETERMINATION AND INTERPRETATION OF COLD STRESS WHEN USING REQUIRED CLOTHING INSULATION (IREQ) AND LOCAL COOLING EFFECTS
DIN EN ISO 11148-12:2013-05 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
10/30191968 DC : 0 BS ISO 28803 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS
NF EN ISO 11148-10 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
I.S. EN 15774:2010 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
BS EN ISO 11148-10:2011 Hand-held non-electric power tools. Safety requirements Compression power tools
BS EN ISO 28803:2012 Ergonomics of the physical environment. Application of international standards to people with special requirements
11/30212367 DC : 0 BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
BS EN ISO 11148-9:2011 Hand-held non-electric power tools. Safety requirements Die grinders
12/30147224 DC : 0 BS 5970 - THERMAL INSULATION OF PIPEWORK, DUCTWORK, ASSOCIATED EQUIPMENT AND OTHER INDUSTRIAL INSTALLATIONS IN THE TEMPERATURE RANGE OF -100 DEGREES C TO +870 DEGREES C - CODE OF PRACTICE
DIN EN 15774:2011-10 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
ISO 35101:2017 Petroleum and natural gas industries — Arctic operations — Working environment
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN ISO 11148-10:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
ISO 11148-13:2017 Hand-held non-electric power tools Safety requirements Part 13: Fastener driving tools
I.S. EN ISO 11148-8:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
PREN 16282-1 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
ISO/TS 16976-5:2013 Respiratory protective devices Human factors Part 5: Thermal effects
ISO/TR 22100-3:2016 Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards
IEC 61010-2-120:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment
BS EN ISO 11079:2007 Ergonomics of the thermal environment. Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
BS EN 614-1 : 2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
I.S. EN ISO 13732-1:2008 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES
11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
BS EN 15774:2010 Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements
UNI EN ISO 11148-1 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
12/30273148 DC : 0 BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
PREN 1672-1 : DRAFT 2012 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
08/30183842 DC : DRAFT JUNE 2008 BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
08/30183838 DC : DRAFT JUNE 2008 BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
12/30259421 DC : 0 BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
08/30183566 DC : DRAFT JUNE 2008 BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
BS EN ISO 11148-5:2011 Hand-held non-electric power tools. Safety requirements Rotary percussive drills
DIN EN ISO 11148-3:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
UNI EN ISO 11148-5 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
DIN EN 16327:2014-07 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
UNI EN ISO 11148-6 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
DIN EN ISO 11148-11:2012-06 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
BS EN 15467:2014 Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements
09/30187371 DC : 0 BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
BS EN 1672-1:2014 Food processing machinery. Basic concepts Safety requirements
DIN EN ISO 28803:2012-06 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
DIN EN ISO 11148-2:2012-06 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
DIN EN ISO 11148-5:2012-06 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
NF EN ISO 11148-9 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN ISO 11148-8:2012-06 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
ANSI B11.0 : 2015 SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
I.S. EN 1672-1:2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
EN 16282-1:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 1: General requirements including calculation method
UNE-EN 16327:2015 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
DIN EN 15467:2015-03 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
NF EN ISO 11148-11 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNI EN 15774 : 2011 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1012-1:2011-02 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
I.S. EN 1012-1:2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
I.S. EN 422:2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
I.S. EN 614-1:2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008)
PD ISO/TR 22100-3:2016 Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards
BS EN ISO 11148-2:2011 Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools
NF EN ISO 11148-5 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY, PERCUSSIVE DRILLS
DIN EN ISO 11148-6:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
09/30183551 DC : 0 BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
08/30175637 DC : DRAFT MAR 2008 BS EN 15774 - FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
09/30187374 DC : 0 BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN EN ISO 11148-7:2013-01 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN ISO 11148-12 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
BS EN ISO 11148-6:2012 Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners
BS PD ISO/TR 22411 : 2008
I.S. EN ISO 28803:2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012)
I.S. EN ISO 11148-9:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
09/30183557 DC : 0 BS EN ISO 11148-9 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
UNI EN ISO 11148-8 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNI EN 16327 : 2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
BS ISO 21789:2009 Gas turbine applications — Safety
DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 16282-1:2017 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
UNI EN ISO 11148-4 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
UNI EN ISO 11148-9 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
I.S. EN ISO 11148-12:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN ISO 11148-6:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
NF EN ISO 11148-2 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
ISO 19372:2015 Microturbines applications — Safety
DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN EN 422:2009-10 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools
UNI EN 1012-1 : 2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
UNI EN ISO 13732-1 : 2009 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES
UNI EN 614-1 : 2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN ISO 14505-2 : 2007 ERGONOMICS OF THE THERMAL ENVIRONMENT - EVALUATION OF THERMAL ENVIRONMENTS IN VEHICLES - PART 2: DETERMINATION OF EQUIVALENT TEMPERATURE
UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
UNI EN 422 : 2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN ISO 15743 : 2008 ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT
BS ISO 35101:2017 Petroleum and natural gas industries. Arctic operations. Working environment
09/30183554 DC : 0 BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
PD ISO/TS 16976-5:2013 Respiratory protective devices. Human factors Thermal effects
BS EN ISO 11148-3:2012 Hand-held non-electric power tools. Safety requirements Drills and tappers
BS EN ISO 11148-8:2011 Hand-held non-electric power tools. Safety requirements Sanders and polishers
11/30244192 DC : 0 BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
09/30187377 DC : 0 BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
04/19987805 DC : 0 BS ISO 14505-1 - ERGONOMICS OF THE THERMAL ENVIRONMENT - EVALUATION OF THERMAL ENVIRONMENT IN VEHICLES - PART 1: PRINCIPLES AND METHODS FOR ASSESSMENT OF THERMAL STRESS
09/30183560 DC : 0 BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
DIN EN ISO 15743:2008-11 ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT
BS EN 415-10:2014 Safety of packaging machines General Requirements
14/30303741 DC : 0 BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
BS EN 16327:2014 Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN IEC 61010-2-120:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment
BS EN 16282-1:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens General requirements including calculation method
BS EN ISO 11148-7:2012 Hand-held non-electric power tools. Safety requirements Grinders
09/30187380 DC : 0 BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
DD ISO/TS 14415:2005 Ergonomics of the thermal environment. Application of international standards to people with special requirements
DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
DIN EN ISO 11148-10:2012-06 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
UNI EN ISO 11148-11 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNE-EN 1672-1:2015 Food processing machinery - Basic concepts - Part 1: Safety requirements
PREN 15467 : DRAFT 2012 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15467:2014 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 11148-3 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN ISO 11148-4:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
I.S. EN ISO 11148-2:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
I.S. EN ISO 15743:2008 ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT
I.S. EN ISO 11148-3:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners
ISO 11148-1:2011 Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners
BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
ISO 28803:2012 Ergonomics of the physical environment — Application of International Standards to people with special requirements
ISO 11148-2:2011 Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools
ISO 11148-9:2011 Hand-held non-electric power tools Safety requirements Part 9: Die grinders
BS ISO 19372:2015 Microturbines applications. Safety
ISO 11148-8:2011 Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers
ISO 11148-11:2011 Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears
ISO 15743:2008 Ergonomics of the thermal environment Cold workplaces Risk assessment and management
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
09/30203113 DC : 0 BS EN 4666 - AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS
ISO 11148-5:2011 Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills
BS EN 422:2009 Plastics and rubber machines. Blow moulding machines. Safety requirements
13/30280751 DC : 0 BS EN 4666 - AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS
ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders
ISO 11148-10:2011 Hand-held non-electric power tools Safety requirements Part 10: Compression power tools
16/30282349 DC : 0 BS ISO 35101 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - WORKING ENVIRONMENT
ISO 11079:2007 Ergonomics of the thermal environment Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
EN ISO 11148-8:2011 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
EN 15467:2014 Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements
EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
EN ISO 11148-7:2012 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements
EN ISO 11148-6:2012 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
EN ISO 11148-12:2012 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
EN ISO 11148-2:2011 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
EN ISO 28803:2012 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
EN ISO 11148-4:2012 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
EN ISO 11148-5:2011 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
EN ISO 11079:2007 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007)
EN ISO 11148-1:2011 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
EN ISO 11148-3:2012 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
EN ISO 11148-11:2011 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 11148-9:2011 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
EN ISO 15743:2008 Ergonomics of the thermal environment - Cold workplaces - Risk assessment and management (ISO 15743:2008)
EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN ISO 11148-10:2011 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
I.S. EN 16327:2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
ISO 21789:2009 Gas turbine applications — Safety
DIN EN ISO 11148-1:2012-06 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
DIN EN 1672-1:2014-12 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
15/30264711 DC : 0 BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
DIN EN ISO 11148-4:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
BS EN ISO 15743:2008 Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management
13/30279160 DC : 0 BS EN 6101-2-0120 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, LABORATORY USE - PART 2-0120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY
BS EN ISO 11148-12:2012 Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
PD CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
DIN EN ISO 11148-9:2012-06 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
09/30187383 DC : 0 BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
BS EN ISO 11148-4:2012 Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools
NF EN ISO 11148-8 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
I.S. EN ISO 11148-11:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
I.S. EN ISO 11148-7:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
I.S. EN ISO 11148-1:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
I.S. EN IEC 61010-2-120:2018 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY ASPECTS OF EQUIPMENT
NF EN ISO 11148-1 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
S.R. CEN ISO/TR 22411:2011 ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES
UNI EN 1672-1 : 2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN ISO 28803 : 2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS
UNI EN ISO 11148-10 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
I.S. EN ISO 11148-5:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
DIN EN 614-1:2009-06 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
DIN EN ISO 11079:2008-04 Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007)
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements Air compressors
ISO 11148-3:2012 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers
ISO 11148-12:2012 Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws
BS EN ISO 13732-1:2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces Hot surfaces
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
TR 4666 : 2016 AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS

EN 13202 : 2000 ERGONOMICS OF THE THERMAL ENVIRONMENT - TEMPERATURES OF TOUCHABLE HOT SURFACES - GUIDANCE FOR ESTABLISHING SURFACE TEMPERATURE LIMIT VALUES IN PRODUCT STANDARDS WITH THE AID OF EN 563
ISO 11064-4:2013 Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
ISO 7726:1998 Ergonomics of the thermal environment Instruments for measuring physical quantities
EN 563:1994/A1:1999/AC:2000 SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
EN ISO 11064-4:2013 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013)
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN 511:2006 Protective gloves against cold
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY

€123.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.