ISO 11451-1:2015
Current
Current
The latest, up-to-date edition.
Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
02-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 11451-1:2015 specifies general conditions, defines terms, gives practical guidelines, and establishes the basic principles of the vehicle tests used in the other parts of ISO 11451, for determining the immunity of passenger cars and commercial vehicles to electrical disturbances from narrowband radiated electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).
The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields. A wide frequency range (0,01 MHz to 18 000 MHz) is allowed for the immunity testing in this and the other parts of ISO 11451.
| DevelopmentNote |
Supersedes ISO/DIS 11451-1. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 11451-1 : 2015 | Identical |
| SS-ISO 11451-1 : 2015 | Identical |
| BS ISO 11451-1:2015 | Identical |
| UNE-ISO 11451-1:2010 | Identical |
| DIN ISO 11451-1:2000-03 | Identical |
| SAE J551/1_201501 | Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (16.6 Hz to 18 GHz) |
| BS ISO 7634:2007 | Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| ISO 11451-4:2013 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) |
| 17/30358367 DC : 0 | BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS |
| SAE J ISO 13766 : FEB 2003 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| ISO 7634:2007 | Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures |
| 01/714099 DC : DRAFT OCT 2001 | ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| 08/30173378 DC : DRAFT AUG 2008 | BS ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| EN 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| BS ISO 11451-3:2015 | Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy On-board transmitter simulation |
| EN 61851-21-1:2017/AC:2017-11 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017) |
| CSA M14982 : 2000 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| 13/30261311 DC : 0 | BS ISO 11451-2 - ROAD VEHICLES - VEHICLE TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: OFF-VEHICLE RADIATION SOURCES |
| 00/706017 DC : DRAFT MAR 2000 | BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES |
| UNE-ISO 11451-2:2013 | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| ISO 11451-3:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation |
| UNE-EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
| I.S. EN 13309:2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| I.S. EN ISO 14982:2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| BS EN 61851-21-1:2017 | Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply |
| 05/19973585 DC : DRAFT APR 2005 | BS ISO 11451-4 - ROAD VEHICLES - ELECTRICAL DISTURBANCES BY NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: BULK CURRENT INJECTION (BCI) |
| CEI EN 62132-4 : 2006 | CIRCUITS INTEGRES - MESURE DE L'IMMUNITE ELECTROMAGNETIQUE 150 KHZ A 1 GHZ - PARTIE 4: METHODE D'INJECTION DIRECTE DE PUISSANCE RF |
| 06/19972489 DC : DRAFT MAY 2006 | BS ISO 11451-3 - ROAD VEHICLES - VEHICLE TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 3: ON-BOARD TRANSMITTER SIMULATION |
| NF ISO 13766 : 1999 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| 03/309820 DC : DRAFT JUNE 2003 | ISO 11451-2 - ROAD VEHICLES - VEHICLE TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: OFF-VEHICLE RADIATION SOURCES |
| SAE J2578_201408 | Recommended Practice for General Fuel Cell Vehicle Safety |
| ISO/TR 15497:2000 | Road vehicles Development guidelines for vehicle based software |
| ISO 11835:2002 | Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| ISO 15763:2002 | Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| 04/30089279 DC : DRAFT FEB 2004 | ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS |
| UNI EN 13309 : 2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| UNI EN ISO 14982 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| BS ISO 11451-4:2013 | Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Bulk current injection (BCI) |
| BS EN 62132-4:2006 | Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz Direct RF power injection method |
| SAE J2357_201211 | Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment |
| BS ISO 11451-2:2015 | Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Off-vehicle radiation sources |
| 12/30254586 DC : 0 | BS ISO 11451-4 - ROAD VEHICLES - VEHICLE TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: BULK CURRENT INJECTION (BCI) |
| 05/30127980 DC : DRAFT JAN 2005 | ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| ISO 13766-1:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions |
| IEC 60839-10-1:1995 | Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars |
| I.S. EN 61851-21-1:2017 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY |
| IEC 61851-21-1:2017 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
| DIN EN ISO 14982:2009-12 | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| IEC 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| 13/30261314 DC : 0 | BS ISO 11451-3 - ROAD VEHICLES - VEHICLE TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 3: ON-BOARD TRANSMITTER SIMULATION |
| 16/30316578 DC : 0 | BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS |
| BS ISO 7635:2006 | Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures |
| 07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| 99/200355 DC : DRAFT FEB 1999 | ISO 6469-2 - ELECTRIC ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 2: FUNCTIONAL SAFETY MEANS AND PROTECTION AGAINST FAILURES |
| I.S. EN 62132-4:2006 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| ISO 7635:2006 | Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures |
| DIN EN 13309:2010-12 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| BS EN ISO 14982:2009 | Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria |
| BS EN 13309:2010 | Construction machinery. Electromagnetic compatibility of machines with internal power supply |
| IEC 60050-726:1982 | International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.