Skip to content
Please enter a keyword to search

  • IEC 62132-4:2006

    Current The latest, up-to-date edition.

    Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  21-02-2006

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Describes a method to measure the immunity of integrated circuits (IC) in the presence of conducted RF disturbances, e.g. resulting from radiated RF disturbances. This method guarantees a high degree of repeatability and correlation of immunity measurements.This standard establishes a common base for the evaluation of semiconductor devices used in equipment functioning in an environment subject to unwanted radio frequency electromagnetic waves.

    General Product Information - (Show below) - (Hide below)

    Committee TC 47/SC 47A
    Development Note Stability Date: 2015. (10/2012)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 62228-2:2017 (published 2017-02) Integrated circuits. EMC evaluation of transceivers LIN transceivers
    EN 62433-4:2016 EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI)
    10/30209944 DC : 0 BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    CEI EN 62228-2 : 1ED 2017 INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS
    I.S. EN 62228-2:2017 INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS
    CEI EN 62215-3 : 2014 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    EN IEC 62969-1:2018 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
    17/30350017 DC : 0 BS EN 62228-1 - INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 1: GENERAL CONDITIONS AND DEFINITIONS
    14/30310470 DC : 0 BS EN 62228-2 - INTEGRATED CIRCUITS - EMC EVALUATION OF LIN TRANSCEIVERS
    IEC TS 62215-2:2007 Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method
    14/30310474 DC : 0 BS EN 62433-4 ED 1.0 - EMC IC MODELLING - PART 4: MODELS OF INTEGRATED CIRCUITS FOR RF IMMUNITY BEHAVIOURAL SIMULATION - CONDUCTED IMMUNITY MODELLING (ICIM-CI)
    BS EN 62132-1:2016 (published 2016-03) Integrated circuits. Measurement of electromagnetic immunity General conditions and definitions
    I.S. EN 62215-3:2013 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD (IEC 62215-3:2013 (EQV))
    I.S. EN 62132-1:2016 INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS
    IEC TS 62228:2007 Integrated circuits - EMC evaluation of CAN transceivers
    IEC 62969-1:2017 Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors
    BS EN 62433-4:2016 EMC IC modelling Models of integrated circuits for RF immunity behavioural simulation. Conducted immunity modelling (ICIM-CI)
    DD IEC/TS 62215-2:2007 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: SYNCHRONOUS TRANSIENT INJECTION METHOD
    NF EN 62215-3 : 2014 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    05/30137850 DC : DRAFT AUG 2005 IEC 62215-2 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: IMPULSE INJECTION METHOD
    12/30268333 DC : 0 BS EN 62132-1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS
    IEEE 802.3-2012 ETHERNET - CORRIGENDUM 1: MULTI-LANE TIMESTAMPING
    IEC 62228-1:2018 Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions
    IEC 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
    IEC 62132-1:2015 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions
    CEI EN 62433-4 : 1ED 2017 EMC IC MODELLING - PART 4: MODELS OF INTEGRATED CIRCUITS FOR RF IMMUNITY BEHAVIOURAL SIMULATION - CONDUCTED IMMUNITY MODELLING (ICIM-CI)
    BS EN 62215-3:2013 INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    16/30336986 DC : 0 BS EN 62969-1 - SEMICONDUCTOR DEVICES - SEMICONDUCTOR INTERFACE FOR AUTOMOTIVE VEHICLES - PART 1: GENERAL REQUIREMENTS OF POWER INTERFACE FOR AUTOMOTIVE VEHICLE SENSORS
    DD IEC/TS 62228:2007
    ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
    IEC 62228-2:2016 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers
    IEC 62433-4:2016 EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI)
    EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions
    EN 62228-2:2017 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers
    EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 11452-3:2016 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell
    ISO 11452-4:2011 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods
    ISO 11451-3:2015 Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 3: On-board transmitter simulation
    IEC 62132-1:2015 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    ISO 11898-1:2015 Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
    IEC 61967-4:2002+AMD1:2006 CSV Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method
    ISO 11452-2:2004 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure
    ISO 11452-1:2015 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
    ISO 11452-5:2002 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 5: Stripline
    ISO 11451-2:2015 Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources
    ISO 11452-7:2003 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection
    ISO 11451-4:2013 Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI)
    ISO 11451-1:2015 Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective