![header thumbnail](/images/publishers\iso_cover.gif)
ISO 12135:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
![header thumbnail](/images/publishers\iso_cover.gif)
Metallic materials Unified method of test for the determination of quasistatic fracture toughness
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
27-07-2021
English
09-11-2016
ISO 12135:2016 specifies methods for determining fracture toughness in terms of K, , J and R-curves for homogeneous metallic materials subjected to quasistatic loading. Specimens are notched, precracked by fatigue and tested under slowly increasing displacement. The fracture toughness is determined for individual specimens at or after the onset of ductile crack extension or at the onset of ductile crack instability or unstable crack extension. In some cases in the testing of ferritic materials, unstable crack extension can occur by cleavage or ductile crack initiation and growth, interrupted by cleavage extension. The fracture toughness at crack arrest is not covered by this document. In cases where cracks grow in a stable manner under ductile tearing conditions, a resistance curve describing fracture toughness as a function of crack extension is measured. In most cases, statistical variability of the results is modest and reporting the average of three or more test results is acceptable. In cases of cleavage fracture of ferritic materials in the ductile-to-brittle transition region, variability can be large and additional tests may be required to quantify statistical variability. Special testing requirements and analysis procedures are necessary when testing weldments and these are described in ISO 15653 which is complementary to this document.
When fracture occurs by cleavage or when cleavage is preceded by limited ductile crack extension, it may be useful to establish the reference temperature for the material by conducting testing and analysis in accordance with ASTM E1921.[2]
DevelopmentNote |
Supersedes ISO/FDIS 12135. (11/2016)
|
DocumentType |
Standard
|
Pages |
98
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
IS 17151 : 2019 | Identical |
NEN ISO 12135 : 2003 C1 2008 | Identical |
BS 8571:2014 | Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens |
15/30316712 DC : 0 | BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
BS ISO 26843:2015 | Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces |
UNE-EN ISO 15653:2011 | Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010) |
17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
15/30322070 DC : 0 | BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
EN ISO 3183:2012/A1:2018 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
ASTM E 2818 : 2011 | Standard Practice for Determination of Quasistatic Fracture Toughness of Welds |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
I.S. EN ISO 15653:2018 | METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS OF WELDS (ISO 15653:2018) |
BS EN ISO 12737:2010 | Metallic materials. Determination of plane-strain fracture toughness |
BS EN ISO 19902 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
UNI EN 16482 : 2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
ISO/TS 7705:2017 | Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
ISO 22889:2013 | Metallic materials Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
05/30126727 DC : DRAFT JUL 2005 | ISO 22889 - METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF RESISTANCE TO STABLE CRACK EXTENSION USING SPECIMENS OF LOW CONSTRAINT |
17/30342659 DC : 0 | BS ISO 21635 - SHIPS AND MARINE TECHNOLOGY - SPECIFICATION OF HIGH MANGANESE AUSTENITIC STEEL USED FOR LNG TANKS ON BOARD SHIPS |
DIN EN 16482:2014-09 | FOUNDING - CONTINUOUS CAST IRON BARS |
15/30319081 DC : 0 | BS ISO 26843 - METALLIC MATERIALS - MEASUREMENT OF FRACTURE TOUGHNESS AT IMPACT LOADING RATES USING PRECRACKED CHARPY-TYPE TEST PIECES |
06/19976125 DC : 0 | BS ISO 15653 - METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF FRACTURE TOUGHNESS OF WELDS |
05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
I.S. EN ISO 12737:2010 | METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
EN ISO 19902:2007/A1:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013) |
UNI EN ISO 12737 : 2011 | METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
UNE-EN 16482:2014 | Founding - Continuous cast iron bars |
16/30339134 DC : 0 | BS EN ISO 15653 - METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS OF WELDS |
DIN EN ISO 15653:2016-06 (Draft) | METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS OF WELDS |
11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
BS ISO 27306:2016 | Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
08/30151040 DC : DRAFT MAR 2008 | BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
12/30267860 DC : 0 | BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS |
14/30291891 DC : 0 | BS 8571 - METHOD OF TEST FOR DETERMINATION OF FRACTURE TOUGHNESS IN METALLIC MATERIALS USING SINGLE EDGE NOTCHED TENSION (SENT) SPECIMENS |
I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
ONORM EN ISO 15653 : 2010 | METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS OF WELDS |
DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
ONORM EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007 + AMD 1:2013) |
UNE-EN ISO 12737:2011 | Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
ISO 15653:2018 | Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds |
08/30151326 DC : 0 | BS ISO 26843 - METALLIC MATERIALS - MEASUREMENT OF FRACTURE TOUGHNESS OF STEELS AT IMPACT LOADING RATES USING PRECRACKED CHARPY SPECIMENS |
BS ISO 22889:2013 | Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
BS EN 16482:2014 | Founding. Continuous cast iron bars |
I.S. EN 16482:2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
EN ISO 15653:2018 | Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018) |
ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
ISO 26843:2015 | Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces |
ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
DIN EN ISO 12737:2011-04 | METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
ISO 12737:2010 | Metallic materials Determination of plane-strain fracture toughness |
ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
EN 16482:2014 | Founding - Continuous cast iron bars |
EN ISO 12737:2010 | Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
PREN 1563 : DRAFT 2015 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
PD ISO/TS 7705:2017 | Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
DIN EN 16482:2014-09 | FOUNDING - CONTINUOUS CAST IRON BARS |
UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
NF EN ISO 15653 : 2010 | METALLIC MATERIALS - METHOD OF TEST FOR THE DETERMINATION OF QUASISTATIC FRACTURE TOUGHNESS OF WELDS |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
KTA 3206 : 2014(R2017)Berichtigung:2019 | BREAK PRECLUSION VERIFICATIONS FOR PRESSURE-RETAINING COMPONENTS IN NUCLEAR POWER PLANTS |
UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
DIN EN ISO 12737:1999-04 | METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
ISO 15653:2010 | Metallic materials Method of test for the determination of quasistatic fracture toughness of welds |
ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
ISO 3785:2006 | Metallic materials — Designation of test specimen axes in relation to product texture |
BS 7448-4:1997 | Fracture mechanics toughness tests Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials |
ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.