![header thumbnail](/images/publishers\iso_cover.gif)
ISO 15380:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\iso_cover.gif)
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
26-10-2023
English, French
21-11-2016
ISO 15380:2016 specifies the requirements for environmentally acceptable hydraulic fluids and is intended for hydraulic systems, particularly hydraulic fluid power systems. The purpose of this International Standard is to provide guidance for suppliers and users of environmentally acceptable hydraulic fluids and for the direction of original equipment manufacturers of hydraulic systems.
ISO 15380:2016 stipulates the requirements for environmentally acceptable hydraulic fluids at the time of delivery.
Classification of fluids used in hydraulic application is defined in ISO 6743‑4. ISO 15380:2016 encompasses only four of the categories of environmentally acceptable fluids covered by ISO 6743‑4. These categories are HETG, HEPG, HEES and HEPR. The minimum content of base fluid for each category shall not be less than 70 % (m/m).
Committee |
ISO/TC 28/SC 4
|
DevelopmentNote |
Supersedes ISO/FDIS 15380. (11/2016)
|
DocumentType |
Standard
|
Pages |
19
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
DIN ISO 15380:2020-12 | Identical |
NF ISO 15380 : 2017 | Identical |
BS ISO 15380:2016 | Identical |
PN-ISO 15380:2018-12 | Identical |
PN ISO 15380 : 2012 | Identical |
DIN ISO 15380:2004-05 | Identical |
GOST ISO 15380 : 2014 | Identical |
BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
04/30113349 DC : DRAFT MAY 2004 | ISO 4263-3 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS |
DIN ISO 10100 E : 2013 | HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TEST (ISO 10100:2001 + AMD.1:2012) |
PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
BS ISO 10100 : 2001 | HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TESTS |
ISO 19225:2017 | Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems |
BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
CEN/TR 16227:2011 | Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
CEN/TR 16208:2011 | Biobased products - Overview of standards |
05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
DIN ISO 10100:2013-07 | Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2001 + Amd.1:2012) |
I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
I.S. EN ISO 6743-4:2015 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 4: FAMILY H (HYDRAULIC SYSTEMS) (ISO 6743-4:2015) |
I.S. EN ISO 4263-3:2015 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING EHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015) |
13/30280888 DC : 0 | BS EN ISO 4263-3 - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS |
PD CEN/TR 16208:2011 | Biobased products. Overview of standards |
10/30196881 DC : 0 | BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
S.R. CEN/TR 16208:2011 | BIOBASED PRODUCTS - OVERVIEW OF STANDARDS |
UNI CEN/TR 16227 : 2011 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
DIN EN ISO 4263-3:2016-05 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015) |
BS EN ISO 4263-3:2010 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Anhydrous procedure for synthetic hydraulic fluids |
UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
ASTM D 7752 : 2018 : REDLINE | Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids |
16/30291994 DC : 0 | BS EN ISO 19225 - UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS |
ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
I.S. EN ISO 19225:2017 | UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017) |
EN ISO 19225:2017 | Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) |
DIN EN ISO 6743-4:2015-11 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 4: FAMILY H (HYDRAULIC SYSTEMS) (ISO 6743-4:2015) |
ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
ISO 10100:2001 | Hydraulic fluid power Cylinders Acceptance tests |
BS EN ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L). Classification Family H (Hydraulic systems) |
ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
UNE-EN ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015) |
EN ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015) |
EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
EN ISO 4263-3:2015 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015) |
14/30312370 DC : 0 | BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
PD CEN/TR 16227:2011 | Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
S.R. CEN/TR 16227:2011 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
UNE-EN ISO 4263-3:2016 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015) |
EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
ISO 3016:1994 | Petroleum products Determination of pour point |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 14593:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) |
ISO 20844:2015 | Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
ISO 6341:2012 | Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test |
ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
DIN 51554-3:1978-09 | TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C |
ISO 6245:2001 | Petroleum products — Determination of ash |
ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
ISO 8192:2007 | Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
ISO 10634:1995 | Water quality Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium |
ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
ISO 7346-2:1996 | Water quality Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] Part 2: Semi-static method |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.