![header thumbnail](/images/publishers\iso_cover.gif)
ISO 2787:1984
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\iso_cover.gif)
Rotary and percussive pneumatic tools — Performance tests
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
01-01-1984
This second edition cancels and replaces the first edition (1974). Specifies a test method and technical conditions for the supply of pneumatic tools and gives detailed instructions on the measurements of power output and air consumption and means of adjusting the measured values to specified conditions. A format for test report is included for rotary tools in annex A and in annex B for percussive tools. Annex C gives a procedure of impact energy.
DevelopmentNote |
Also numbered as BS 5344(1985). (08/2005)
|
DocumentType |
Standard
|
Pages |
15
|
ProductNote |
THIS STANDARD ALSO REFERS TO ISO 31
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
BS 5339:1976 | Identical |
PN ISO 2787 : 1997 | Identical |
NFE 51 360 : 1985 | Identical |
NBN E 51 005 : 1989 | Identical |
BIS IS 12563 : 2001 | Identical |
DIN EN ISO 28927-4:2011-05 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
UNI EN ISO 11148-2 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
I.S. EN ISO 28927-2:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUT RUNNERS AND SCREWDRIVERS (ISO 28927-2:2009) |
BS EN ISO 11148-11:2011 | Hand-held non-electric power tools. Safety requirements Nibblers and shears |
I.S. EN ISO 28927-9:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
NF EN ISO 28927-4 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
DIN EN ISO 11148-9:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
DIN EN ISO 28927-1:2010-05 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
BS EN ISO 28927-9:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Scaling hammers and needle scalers |
UNI EN ISO 28927-11 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS |
BS EN ISO 11148-10:2011 | Hand-held non-electric power tools. Safety requirements Compression power tools |
08/30181096 DC : DRAFT APR 2008 | BS EN ISO 28927-9 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
08/30181082 DC : DRAFT APR 2008 | BS EN ISO 28927-8 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION |
08/30181072 DC : DRAFT APR 2008 | BS EN ISO 28927-7 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
UNI EN ISO 28927-7 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
I.S. EN ISO 11148-2:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011) |
UNE-EN ISO 28927-6:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
I.S. EN ISO 28927-10:2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
I.S. EN ISO 11148-8:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011) |
I.S. EN ISO 28927-12:2012 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS (ISO 28927-12:2012) |
ISO 5393:2017 | Rotary tools for threaded fasteners — Performance test method |
DIN EN 792-1:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
DIN EN 792-7:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
DIN EN 792-5:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
BS EN ISO 8662-14:1997 | Hand-held portable power tools. Measurement of vibrations at the handle Stone-working tools and needle scalers |
BS EN 28662-5:1995 | Hand-held portable power tools. Measurement of vibrations at the handle Pavement breakers and hammers for construction work |
BS EN 792-10 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
BS EN 792-2 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
BS EN ISO 8662-7:1997 | Hand-held portable power tools. Measurement of vibrations at the handle Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
UNE-EN ISO 28927-12:2013 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
BS EN 792-4 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
EN ISO 8662-6 : 1995 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 6: IMPACT DRILLS |
DIN EN ISO 11148-11:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
DIN EN ISO 11148-12:2013-05 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
99/710387 DC : DRAFT JUN 99 | EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
DIN EN ISO 28927-11:2011-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
I.S. EN ISO 8662-12:1998 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 12: SAWS AND FILES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION |
I.S. EN ISO 28927-7:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
BS EN ISO 11148-1:2011 | Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners |
I.S. EN ISO 8662-7:1998 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 7: WRENCHES, SCREWDRIVERS AND NUT RUNNERS WITH IMPACT, IMPULSE OR RATCHET ACTION |
NF EN ISO 28927-10 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
UNI EN ISO 11148-1 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
08/30181058 DC : DRAFT APR 2008 | BS EN ISO 28927-5 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
NF EN ISO 28927-3 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
I.S. EN 792-9:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
DD ISO/TS 17104:2006 | Rotary tool for threaded fasteners. Hydraulic impulse tools. Performance test method |
08/30183842 DC : DRAFT JUNE 2008 | BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
DIN EN ISO 28927-3:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
I.S. EN ISO 11148-10:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011) |
08/30183838 DC : DRAFT JUNE 2008 | BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
BS EN ISO 28927-6:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Rammers |
BS EN ISO 11148-5:2011 | Hand-held non-electric power tools. Safety requirements Rotary percussive drills |
NF EN ISO 28927-1 : 2010 AMD 1 2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHOD FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
UNI EN ISO 11148-5 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
UNI EN ISO 11148-6 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
09/30187493 DC : 0 | BS EN ISO 28927-10 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
08/30181068 DC : DRAFT APR 2008 | BS EN ISO 28927-6 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
09/30187371 DC : 0 | BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
I.S. EN ISO 28927-4:2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
DIN EN ISO 11148-8:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
I.S. EN ISO 28927-3:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
BS EN ISO 28927-2 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUTRUNNERS AND SCREWDRIVERS |
I.S. EN ISO 28927-8:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION (ISO 28927-8:2009) |
I.S. TS 8662-11:2004 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 11: FASTENER DRIVING TOOLS |
PREN ISO 28927-4 : DRAFT 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
DIN EN 792-8:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
DIN EN 792-12:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
BS EN 792-8 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
BS EN ISO 8662-10:1998 | Hand-held portable power tools. Measurement of vibrations at the handle Nibblers and shears |
BS EN 792-12 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
BS EN 792-6 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
DIN EN 792-3:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
DIN EN 792-2:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
DIN EN 792-6:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
DIN EN 792-4:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
DIN EN 792-1:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
DIN EN 792-7:2002-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
DIN EN 792-4:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
DIN EN 792-3:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
DIN EN 792-5:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
DIN EN 792-6:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
DIN EN 792-9:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
DIN EN 792-8:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
I.S. EN ISO 15744:2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
UNI EN 792-7 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
UNI EN 792-11 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
UNI EN ISO 15744 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
BS EN ISO 28927-5 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
UNE-EN ISO 28927-9:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
DIN EN ISO 11148-3:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
DIN EN ISO 11148-2:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
BS EN ISO 11148-2:2011 | Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools |
BS EN ISO 11148-3:2012 | Hand-held non-electric power tools. Safety requirements Drills and tappers |
ISO/TS 17104:2006 | Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method |
I.S. EN 28662-3:1994 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 3: ROCK DRILLS AND ROTARY HAMMERS |
13/30280243 DC : 0 | BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD |
NF EN ISO 28927-11 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 11: STONE HAMMERS |
09/30183551 DC : 0 | BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
UNE-EN ISO 28927-5:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
I.S. EN 28662-2:1994 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 2: CHIPPING HAMMERS AND RIVETING HAMMERS |
I.S. EN ISO 8662-13:1998 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 13: DIE GRINDERS |
UNE-EN ISO 28927-11:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
BS EN ISO 28927-10:2011 | Hand-held portable power tools. Test methods for evaluation of vibration emission Percussive drills, hammers and breakers |
14/30242985 DC : 0 | BS EN ISO 28927-8:2009/A1 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION |
UNI EN ISO 11148-12 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
DIN EN ISO 28927-6:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
09/30183557 DC : 0 | BS EN ISO 11148-9 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
UNI EN ISO 11148-8 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
UNI EN ISO 28927-6 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
I.S. EN ISO 11148-3:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
UNI EN ISO 11148-4 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
UNI EN ISO 11148-9 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
I.S. EN ISO 11148-12:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012) |
I.S. EN ISO 11148-6:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
UNI EN ISO 28927-9 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
NF EN ISO 28927-8 : 2010 AMD 1 2016 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION |
ISO 28927-4:2010 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 4: Straight grinders |
EN ISO 28927-1:2009/A1:2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS (ISO 28927-1:2009/AMD 1:2017) |
DIN EN 792-11:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
BS EN 792-5 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
ISO 28927-11:2011 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 11: Stone hammers |
ISO 11148-4:2012 | Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools |
BS EN 28662-2:1995 | Hand-held portable power tools. Measurement of vibrations at the handle Chipping hammers and riveting hammers |
UNE-EN ISO 28927-8:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
EN 792-6:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
UNI EN 792-3 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
UNI EN ISO 28927-12 : 2012 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS |
UNI EN 792-12 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
UNI EN 792-2 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
UNI EN 792-4 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
UNI EN 792-10 : 2009 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
UNI EN 792-5 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
EN 28662-2 : 94 AMD 2 2001 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 2: CHIPPING HAMMERS AND RIVETING HAMMERS |
UNI EN 792-8 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
UNI EN 792-6 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
UNI EN 792-9 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
UNI EN 792-1 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
DIN EN ISO 11148-6:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
09/30183554 DC : 0 | BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
DIN EN ISO 28927-7:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
NF EN ISO 28927-5 : 2010 AMD 1 2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
DIN EN ISO 28927-10:2011-07 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
BS EN ISO 28927-3:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Polishers and rotary, orbital and random orbital sanders |
I.S. EN ISO 11148-9:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011) |
DIN EN ISO 11148-4:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
BS EN ISO 28927-11:2011 | Hand-held portable power tools. Test methods for evaluation of vibration emission Stone hammers |
BS EN ISO 11148-6:2012 | Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners |
I.S. EN ISO 8662-6:1996 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 6: IMPACT DRILLS |
ISO 28927-1:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 1: Angle and vertical grinders |
09/30187374 DC : 0 | BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
DIN EN ISO 28927-5:2015-12 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009 + AMD 1:2015) |
08/30169607 DC : DRAFT APR 2008 | BS EN ISO 28927-2 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUT RUNNERS AND SCREWDRIVERS |
BS 6292:1982 | Method for evaluation of performance of rotary pneumatic assembly tools for threaded fasteners |
BS EN ISO 28927-12:2012 | Hand-held portable power tools. Test methods for evaluation of vibration emission Die grinders |
09/30169628 DC : 0 | BS EN ISO 28927-4 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
BS EN ISO 11148-7:2012 | Hand-held non-electric power tools. Safety requirements Grinders |
UNI EN ISO 28927-10 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 10: PERCUSSIVE DRILLS, HAMMERS AND BREAKERS |
DIN EN ISO 28927-9:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
DIN EN ISO 11148-10:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
UNI EN ISO 11148-11 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
UNI EN ISO 28927-4 : 2011 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
BS EN ISO 28927-1 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS - CUPPED WIRE BRUSHES (ISO 28927-1:2009) |
UNI EN ISO 11148-3 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
BS EN ISO 28927-8 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION (ISO 28927-8:2009) |
I.S. EN ISO 28927-1:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS (ISO 28927-1:2009) |
BS ISO 5393:2017 | Rotary tools for threaded fasteners. Performance test method |
DIN EN ISO 28927-8:2016-07 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 8: SAWS, POLISHING AND FILING MACHINES WITH RECIPROCATING ACTION AND SMALL SAWS WITH OSCILLATING OR ROTATING ACTION (ISO 28927-8:2009 + AMD 1:2015) |
EN ISO 28927-4:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
DIN EN ISO 15744:2008-11 | HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
BS EN ISO 15744:2002 | Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2) |
BS EN 792-11 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
ISO 11148-6:2012 | Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners |
ISO 11148-1:2011 | Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners |
ISO 8662-12:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
ISO 28927-3:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 3: Polishers and rotary, orbital and random orbital sanders |
BS EN ISO 8662-13:1997 | Hand-held portable power tools. Measurement of vibrations at the handle Die grinders |
BS EN ISO 8662-12:1997 | Hand-held portable power tools. Measurement of vibrations at the handle Saws and files with reciprocating action and saws with rotating or oscillating action |
ISO 8662-6:1994 | Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills |
ISO 28927-5:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills |
ISO 8662-7:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
ISO 28927-8:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action |
ISO 11148-2:2011 | Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools |
ISO 11148-9:2011 | Hand-held non-electric power tools Safety requirements Part 9: Die grinders |
ISO 11148-8:2011 | Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers |
ISO 28927-6:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 6: Rammers |
ISO 11148-11:2011 | Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears |
ISO 28927-7:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 7: Nibblers and shears |
ISO 28927-9:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 9: Scaling hammers and needle scalers |
ISO 8662-11:1999 | Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools |
ISO 8662-10:1998 | Hand-held portable power tools Measurement of vibrations at the handle Part 10: Nibblers and shears |
ISO 15744:2002 | Hand-held non-electric power tools Noise measurement code Engineering method (grade 2) |
ISO 11148-5:2011 | Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills |
ISO 28927-10:2011 | Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers |
ISO 11148-7:2012 | Hand-held non-electric power tools — Safety requirements — Part 7: Grinders |
ISO 11148-10:2011 | Hand-held non-electric power tools Safety requirements Part 10: Compression power tools |
BS EN ISO 8662-8:1997 | Hand-held portable power tools. Measurement of vibrations at the handle Polishers and rotary, orbital and random orbital sanders |
ISO 28927-2:2009 | Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers |
ISO 8662-8:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders |
ISO 28927-12:2012 | Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders |
ISO 8662-9:1996 | Hand-held portable power tools Measurement of vibrations at the handle Part 9: Rammers |
ISO 8662-13:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 13: Die grinders |
DIN EN 792-11:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
EN ISO 28927-7:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
EN 792-5:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
EN ISO 11148-8:2011 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
EN ISO 28927-11:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
EN 792-7:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
EN ISO 28927-6:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
EN ISO 11148-7:2012 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
EN ISO 11148-6:2012 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
EN ISO 15744:2008 | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
EN ISO 8662-10:1998/AC:2002 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 10: NIBBLERS AND SHEARS |
CEN ISO/TS 8662-11:2004/AC:2004 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 11: FASTENER DRIVING TOOLS |
EN 792-10:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
EN ISO 11148-12:2012 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
EN ISO 8662-13:1997 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 13: DIE GRINDERS |
EN ISO 11148-2:2011 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
EN ISO 11148-4:2012 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
EN ISO 11148-5:2011 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
EN ISO 8662-14 : 1996 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - STONE-WORKING TOOLS AND NEEDLE SCALERS |
EN ISO 8662-8 : 1997 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
EN ISO 28927-3:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
EN 792-8:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
EN ISO 11148-1:2011 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
EN ISO 11148-3:2012 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
EN ISO 11148-11:2011 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
EN ISO 28927-12:2012 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
EN ISO 28927-9:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
EN 792-4:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools |
EN 792-11:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
EN 792-1:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
EN 792-9:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
EN ISO 11148-9:2011 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
EN 792-2:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
EN 792-3:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
EN 28662-5:1994/A2:2001 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PAVEMENT BREAKERS AND HAMMERS FOR CONSTRUCTION WORK |
EN 792-12:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
EN ISO 11148-10:2011 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
EN ISO 28927-2:2009/A1:2017 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017) |
EN ISO 8662-9 : 1996 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - RAMMERS |
EN ISO 8662-12 : 1997 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 12: SAWS AND FILES WITH RECIPROCATING ACTION AND SAWS WITH OSCILLATING OR ROTATING ACTION |
EN 28662-3:1994/A2:2001 | HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - ROCK DRILLS AND ROTARY HAMMERS |
EN ISO 8662-7 : 1997 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 7: WRENCHES, SCREWDRIVERS AND NUT RUNNERS WITH IMPACT, IMPULSE OR RATCHET ACTION |
UNE-EN ISO 28927-10:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
DIN EN ISO 11148-5:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
DIN EN ISO 11148-1:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
09/30183560 DC : 0 | BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
UNI EN ISO 11148-7 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
I.S. EN ISO 11148-1:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011) |
UNI EN ISO 28927-3 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
BS EN ISO 28927-7:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Nibblers and shears |
10/30227635 DC : 0 | BS EN ISO 28927-12 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS |
BS EN ISO 11148-8:2011 | Hand-held non-electric power tools. Safety requirements Sanders and polishers |
I.S. EN ISO 8662-10:1999 | HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - PART 10: NIBBLERS AND SHEARS |
I.S. EN ISO 11148-4:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
I.S. EN 792-7:2002 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
NF EN ISO 28927-2 : 2010 AMD 1 2017 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 2: WRENCHES, NUTRUNNERS AND SCREWDRIVERS |
08/30169617 DC : DRAFT APR 2008 | BS EN ISO 28927-1 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
BS EN ISO 11148-12:2012 | Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws |
DIN EN ISO 11148-7:2013-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
BS EN ISO 11148-9:2011 | Hand-held non-electric power tools. Safety requirements Die grinders |
08/30169621 DC : DRAFT APR 2008 | BS EN ISO 28927-3 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
09/30187383 DC : 0 | BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
UNE-EN ISO 28927-3:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
DIN EN ISO 28927-12:2013-02 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
UNE-EN ISO 28927-4:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
BS EN ISO 11148-4:2012 | Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools |
09/30187380 DC : 0 | BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
NF EN ISO 28927-9 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMARS AND NEEDLE SCALERS |
BS 6268:1982 | Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners |
UNE-EN ISO 28927-7:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
I.S. EN ISO 11148-7:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
I.S. EN ISO 11148-11:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011) |
BS EN ISO 28927-4 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 4: STRAIGHT GRINDERS |
NF EN ISO 28927-6 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
I.S. EN ISO 28927-5:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009) |
NF EN ISO 28927-7 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 7: NIBBLERS AND SHEARS |
UNI EN ISO 11148-10 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
I.S. EN ISO 11148-5:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011) |
I.S. EN ISO 28927-6:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 6: RAMMERS |
DIN EN 792-2:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
DIN EN 792-9:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
DIN EN 792-10:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
BS EN 792-1 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
BS EN 792-3 : 2000 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
ISO 8662-5:1992 | Hand-held portable power tools — Measurement of vibrations at the handle — Part 5: Pavement breakers and hammers for construction work |
ISO 8662-14:1996 | Hand-held portable power tools Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers |
ISO 11148-3:2012 | Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers |
BS EN 792-9 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
BS EN 28662-3:1995 | Hand-held portable power tools. Measurement of vibrations at the handle Rock drills and rotary hammers |
ISO 11148-12:2012 | Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws |
BS EN 792-7 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
DIN EN 792-12:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS |
EN ISO 28927-5:2009/A1:2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009/AMD 1:2015) |
DIN EN 792-10:2001-02 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.