ISO 4642-1:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
BS ISO 4639-2:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
ANSI B93.100M : 1987
|
HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - METHODS OF TEST |
ISO 4642-2:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
BS ISO 6805:1994
|
Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
12/30264538 DC : 0
|
BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
ISO 16438:2012
|
Agricultural irrigation equipment Thermoplastic collapsible hoses for irrigation Specifications and test methods |
I.S. EN 13765:2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
BS ISO 3861 : 1995 AMD 9705
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
11/30238916 DC : 0
|
BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
UNE-EN ISO 10619-3:2012
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
BS ISO 19385:2017+A1:2019
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification |
07/30162629 DC : 0
|
BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
08/30165015 DC : DRAFT FEB 2008
|
BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
09/30194969 DC : 0
|
BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BS ISO 28017:2009
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification |
BS ISO 8066-2:2001
|
Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification Refrigerant 134a |
03/311277 DC : DRAFT JAN 2004
|
ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
07/30150928 DC : 0
|
BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
15/30317657 DC : 0
|
BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
ISO 8789:2009
|
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
BS ISO 19013-2:2005
|
Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
BS EN ISO 18752:2016
|
Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
DIN EN 16820 E : 2017
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
05/30129301 DC : DRAFT FEB 2005
|
ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
11/30235144 DC : 0
|
BS ISO 16438 - AGRICULTURAL IRRIGATION EQUIPMENT - THERMOPLASTIC COLLAPSIBLE HOSES FOR IRRIGATION - SPECIFICATIONS AND TEST METHODS |
DIN EN ISO 3821:2016-10 (Draft)
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
99/104927 DC : DRAFT JUN 1999
|
PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS |
PREN 13483 : DRAFT 2011
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
07/30175126 DC : DRAFT DEC 2007
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
ISO 3949:2009
|
Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
BS EN ISO 1825:2017
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification |
BS ISO 18752 : 2014
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
ISO 28017:2018
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification |
09/30195768 DC : 0
|
BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
DIN EN ISO 3949 E : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
I.S. EN ISO 10619-1:2018
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2017) |
ISO 3862:2017
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
I.S. EN 15889:2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
DIN EN ISO 10619-1:2012-03
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011) |
BS ISO 23297:2017
|
Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification |
ISO 17165-1:2007
|
Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements |
ISO 11237-2:2006
|
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
EN 13765:2010+A1:2015
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
ISO 19013-1:2005
|
Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
BIS IS 16209 : 2014
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM |
NF EN ISO 1402 : 2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
I.S. EN ISO 3821:2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
UNE-EN 16436-1:2014
|
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
ISO 4079-2:2005
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
UNE-EN 856:2015
|
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
ISO 6605:2017
|
Hydraulic fluid power — Test methods for hoses and hose assemblies |
I.S. EN ISO 1403:2008
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
DIN EN 1947:2014-09
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
DIN EN 13483:2013-09
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
BS EN ISO 7233:2016
|
Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum |
BS EN 13482:2013
|
Rubber hoses and hose assemblies for asphalt and bitumen. Specification |
BS EN 559:2003
|
Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
BS EN ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam. Specification |
UNE-EN ISO 6224:2012
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
UNE-EN 854:2015
|
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
BS EN ISO 6807:2003
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications |
BS EN 857:2015
|
Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
BS EN ISO 5774:2016
|
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
BS EN 14540:2014
|
Fire-fighting hoses. Non-percolating layflat hoses for fixed systems |
ISO 10619-3:2011
|
Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures |
I.S. EN 854:2015
|
RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
DIN EN 1361:1997-08
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
DIN EN ISO 8308:2016-02
|
RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015) |
DIN EN 15889:2011-09
|
Fire-fighting hoses - Test methods |
EN 12621:2006+A1:2010
|
Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
EN 12757-1:2005+A1:2010
|
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
DIN EN 853:2016-09
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
DIN EN 16436-1:2016-04
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
07/30162632 DC : 0
|
BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES |
15/30317639 DC : 0
|
BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
UNE-EN 16643:2017
|
Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
ISO 1436-1:2001
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
07/30170472 DC : DRAFT AUG 2007
|
BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
ONORM EN ISO 1403 : 2010
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
03/311096 DC : DRAFT DEC 2003
|
ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
12/30256960 DC : 0
|
BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
PD ISO/TR 17784:2003
|
Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
BS ISO 3862:2009
|
Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
BS ISO 4642-1:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
BS ISO 5772:2015
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
06/30146125 DC : 0
|
EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
16/30335320 DC : 0
|
BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
ISO 1825:2017
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification |
NF EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
14/30266729 DC : 0
|
BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION |
BS ISO 2398 : 1995 AMD 9704
|
RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
15/30317678 DC : 0
|
BS EN ISO 7233 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION,STORAGE,USE AND MAINTENANCE |
16/30335329 DC : 0
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
ISO 4639-3:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
DIN EN ISO 1403:2010-04
|
RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
07/30169625 DC : 0
|
BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
03/311275 DC : DRAFT DEC 2003
|
ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
15/30293925 DC : 0
|
BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION |
BS ISO 4079:2017
|
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
I.S. EN 13766:2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
ISO 4079:2017
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
I.S. EN ISO 10619-3:2011
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES (ISO 10619-3:2011) |
I.S. EN 16436-1:2014
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
ISO 6804:2016
|
Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
EN ISO 1825:2017
|
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017) |
EN 16436-1:2014+A1:2015
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
18/30363978 DC : 0
|
BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
BS EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
ISO 4079-1:2001
|
Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
I.S. EN 856:2015
|
RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
DIN EN ISO 7233:2015-10 (Draft)
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
DIN EN 12621:2011-07
|
Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
DIN EN ISO 1402:2010-04
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
DIN EN 13482:2013-12
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
DIN EN 14540:2014-09
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam — Specification |
BS EN 12757-1 : 2005
|
MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
BS EN ISO 3861:2008
|
Rubber hoses for sand and grit blasting. Specification |
UNE-EN ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
I.S. EN ISO 6224:2011
|
THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011) |
I.S. EN 14540:2014
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
I.S. EN 12757-1:2005
|
MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
I.S. EN 13483:2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
I.S. EN ISO 3861:2008
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
DIN EN 1361:2004-10
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
I.S. EN ISO 1401:2016
|
RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016) |
I.S. EN 1947:2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
EN 12115:2011
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
I.S. EN ISO 5774:2016
|
PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
I.S. EN ISO 2398:2016
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
EN ISO 3861:2008
|
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
I.S. EN 12621:2006
|
MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
I.S. EN ISO 6807:2004
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
I.S. EN 12115:2011
|
RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
DIN EN ISO 2398:2010-04
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
DIN EN ISO 3821:2010-07
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN ISO 14113:2013
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
I.S. EN ISO 6134:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
I.S. EN 694:2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
I.S. EN ISO 8308:2015
|
RUBBER AND PLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS (ISO 8308:2015) |
I.S. EN 1360:2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
DIN EN 1947:2002-11
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
I.S. EN ISO 5771:2008
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
I.S. EN 13482:2013
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
I.S. EN ISO 7233:2016
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
I.S. EN 853:2015
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
I.S. EN 857:2015
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
I.S. EN ISO 1402:2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
I.S. EN ISO 6806:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
UNI EN 694 : 2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
ONORM EN 13483 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
BS 4749:1991
|
Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
BS 4586:1992
|
Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
BS 3832:1991
|
Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations |
UNI EN ISO 3861 : 2009
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
UNE-EN ISO 28017:2012
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) |
ONORM EN ISO 3861 : 2010
|
RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
PREN 13766 : DRAFT 2016
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
15/30315105 DC : 0
|
BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER |
DIN EN 16820:2015-03 (Draft)
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
15/30317645 DC : 0
|
BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION |
BS ISO 6605:2017
|
Hydraulic fluid power. Test methods for hoses and hose assemblies |
08/30187544 DC : DRAFT OCT 2008
|
BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
DIN EN 1360:2013-09
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
05/30128222 DC : DRAFT JAN 2005
|
ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
15/30317651 DC : 0
|
BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
BS EN ISO 3949:2014
|
Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification |
UNI ISO 17165-1 : 2012
|
HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
03/311322 DC : DRAFT JAN 2004
|
ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
14/30293931 DC : 0
|
BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
BS ISO 16438:2012
|
Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods |
EN ISO 7233:2016
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
UNE-EN 15889:2013
|
Fire-fighting hoses - Test methods |
BS ISO 1436-2:2005
|
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
ISO 27126:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification |
16/30326500 DC : DRAFT JAN 2016
|
BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS |
16/30334966 DC : 0
|
BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
BS ISO 19013-1:2005
|
Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
UNI EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
07/30175122 DC : DRAFT DEC 2007
|
BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
BIS IS 12656 : 2014
|
RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS |
UNE-EN ISO 4641:2017
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
BS EN 15889:2011
|
Fire-fighting hoses. Test methods |
DIN EN 16436-1 E : 2016
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
BS ISO 4642-2:2015
|
Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
06/30127099 DC : DRAFT JUNE 2006
|
ISO 17165-1 - HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
DIN EN 13766:2010-11
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
BS ISO 11424:2017
|
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
I.S. EN ISO 28017:2018
|
RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018) |
ISO 4639-1:1987
|
Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
ISO 1403:2005
|
Rubber hoses, textile-reinforced, for general-purpose water applications Specification |
EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
I.S. EN 16643:2016
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION |
ISO 8066-2:2001
|
Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 2: Refrigerant 134a |
EN ISO 28017:2018
|
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) |
ONORM EN ISO 3821 : 2010
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
EN 13766:2010
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
ISO 27127:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification |
UNI EN ISO 3949 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
EN ISO 10619-1:2018
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) |
ISO 11425:1996
|
Rubber hoses and hose assemblies for automobile power-steering systems Specification |
ISO 10619-1:2017
|
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature |
I.S. EN ISO 4641:2016
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
DIN EN ISO 6807:2004-08
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) |
DIN EN ISO 14113:2014-02
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
DIN EN ISO 3861:2010-04
|
Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
DIN EN 694:2014-10
|
FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
DIN EN 12115:2011-04
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
DIN EN ISO 7233:2017-03
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
BS EN 1763-1:2001
|
Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
BS EN 853:2015
|
Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
ISO 1401:2016
|
Rubber hoses for agricultural spraying |
UNE-EN 853:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners — Specification |
BS EN 694:2014
|
Fire-fighting hoses. Semi-rigid hoses for fixed systems |
UNE-EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
ONORM EN 13766 : 2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
DIN EN 856:2016-09
|
RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
UNI EN ISO 14113 : 2013
|
GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
UNI EN ISO 5771 : 2009
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
UNI EN 12757-1 : 2010
|
MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
UNI EN ISO 1403 : 2009
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN 13482 : 2013
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
UNI EN ISO 6224 : 2011
|
THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
UNI EN 1947 : 2014
|
FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
UNI EN 1360 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
UNI EN 12621 : 2010
|
MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
UNI EN 14540 : 2014
|
FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
UNI EN 13483 : 2013
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
NF EN ISO 10619-3 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES |
BS ISO 16301:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification |
BS EN 16820:2017
|
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining |
BS ISO 17165-1:2007
|
Hydraulic fluid power. Hose assemblies Dimensions and requirements |
BS ISO 10619-3:2011
|
Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness Bending tests at high and low temperatures |
10/30212877 DC : DRAFT JUNE 2010
|
BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
I.S. EN 1361:2004
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
I.S. EN ISO 1746:2000
|
RUBBER OR PLASTICS HOSES AND TUBING - BENDING TESTS |
ISO 3821:2008
|
Gas welding equipment Rubber hoses for welding, cutting and allied processes |
08/30188437 DC : 0
|
BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
12/30238564 DC : 0
|
BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION |
07/30175157 DC : DRAFT DEC 2007
|
BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
ISO 19385:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification |
SAE J 517 : 2017
|
HYDRAULIC HOSE |
11/30250273 DC : 0
|
BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
16/30311803 DC : 0
|
BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION |
EN ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
12/30264535 DC : 0
|
BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
UNE-EN ISO 18752:2017
|
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
16/30302789 DC : DRAFT APR 2016
|
BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION |
BS ISO 4079-2:2005
|
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
08/30190043 DC : DRAFT SEP 2008
|
BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
UNE-EN 13765:2010
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
08/30183539 DC : DRAFT JUNE 2008
|
BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
16/30335326 DC : 0
|
BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
09/30200633 DC : 0
|
BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
13/30284248 DC : 0
|
BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION |
16/30317675 DC : 0
|
BS EN ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
BS EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge. Specification |
04/30110371 DC : 0
|
ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
ISO 4639-2:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
ISO 16301:2017
|
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification |
UNI EN ISO 10619-3 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 3: BENDING TESTS AT HIGH AND LOW TEMPERATURES |
UNI EN 15889 : 2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
03/300797 DC : DRAFT JAN 2003
|
EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
16/30330752 DC : 0
|
BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
DIN EN 1762:2016-09 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
BS ISO 4639-3:1995
|
Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
I.S. EN ISO 18752:2016
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
UNI EN ISO 10619-1 : 2012
|
RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE |
ISO 5772:2015
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
ISO 13363:2016
|
Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
BS ISO 8789:2009
|
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
UNE-EN 13766:2011
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
DIN EN ISO 3949:2016-08 (Draft)
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
ONORM EN ISO 3949 : 2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
PREN 13482 : DRAFT 2012
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
ISO 3862-2:2005
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
DIN EN 13765:2015-05
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
ISO 6805:1994
|
Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
ISO 19013-2:2016
|
Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
PREN 1762 : DRAFT 2018
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
DIN EN 12757-1:2011-02
|
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
ISO 1436:2017
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
EN ISO 3949:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
I.S. EN 1762:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
ISO 11424:2017
|
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
ISO 23297:2017
|
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
ISO 17324:2014
|
Rubber hoses for automotive turbochargers — Specification |
I.S. EN ISO 1825:2017
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017) |
BS EN 13765 : 2010
|
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
DIN EN ISO 6806:2015-08 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
DIN EN ISO 5771:2009-10
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
BS EN ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air. Specification |
BS EN ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies. Hydrostatic testing |
UNE-EN ISO 7233:2017
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
UNE-EN 12621:2006
|
Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge — Specification |
ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification |
UNE-EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
BS EN 1361:2004
|
Rubber hoses and hose assemblies for aviation fuel handling. Specification |
ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air Specification |
ISO 3862-1:2001
|
Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
UNE-EN ISO 1401:2017
|
Rubber hoses for agricultural spraying (ISO 1401:2016) |
UNE-EN ISO 10619-1:2012
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) |
BS EN ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification |
UNE-EN ISO 3821:2011
|
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
BS EN 12115:2011
|
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
BS EN 12621 : 2006
|
MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
UNE-EN 857:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
BS EN ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification |
BS EN ISO 1746:2001
|
Rubber or plastics hoses and tubing. Bending tests |
BS EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners. Specification |
UNE-EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
ISO 14113:2013
|
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 7233:2016
|
Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
UNE-EN 13482:2014
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
BS EN ISO 8308:2015
|
Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls |
ISO 3861:2005
|
Rubber hoses for sand and grit blasting Specification |
BS EN 1360:2013
|
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification |
ISO 8308:2015
|
Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls |
UNE-EN 694:2015
|
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
BS EN 1947:2014
|
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
UNE-EN 1947:2015
|
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
UNE-EN 14540:2015
|
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
ISO 1402:2009
|
Rubber and plastics hoses and hose assemblies Hydrostatic testing |
BS EN ISO 1403:2008
|
Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
UNE-EN ISO 5774:2016
|
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
BS EN ISO 1401:2016
|
Rubber hoses for agricultural spraying |
ISO 6807:2003
|
Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification |
UNE-EN ISO 8308:2017
|
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015) |
UNE-EN ISO 2398:2017
|
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
EN 853:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
EN ISO 18752:2016
|
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
EN ISO 3821:2010
|
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
EN 1327:1996
|
Gas welding equipment - Thermoplastic hoses for welding and allied processes |
EN 14540:2014
|
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
EN ISO 6807 : 2003
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
EN ISO 6224:2011
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
EN ISO 2398:2016
|
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
EN ISO 10619-3:2011
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
EN 16820:2017
|
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
EN 16643:2016
|
Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
EN 559 : 2003
|
GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
EN ISO 1403:2008
|
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005) |
EN 1361 : 2004
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
EN 854:2015
|
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
EN 1947:2014
|
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
EN 857:2015
|
Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
EN ISO 8308:2015
|
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015) |
EN ISO 5771:2008
|
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
EN 15889:2011
|
Fire-fighting hoses - Test methods |
EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
EN ISO 6134:2017
|
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
EN ISO 1401:2016
|
Rubber hoses for agricultural spraying (ISO 1401:2016) |
EN 856:2015
|
Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
EN 694:2014
|
Fire-fighting hoses - Semi-rigid hoses for fixed systems |
EN 1763-1 : 2000
|
RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
EN ISO 5774:2016
|
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
EN ISO 4641:2016
|
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
BS ISO 11425:1996
|
Rubber hoses and hose assemblies for automobile power-steering systems. Specification |
ISO/TR 17784:2003
|
Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
BS ISO 17324:2014
|
Rubber hoses for automotive turbochargers. Specification |
12/30261644 DC : 0
|
BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
08/30183047 DC : DRAFT MAY 2008
|
BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
BS ISO 27126:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification |
BS 5173-101.2:1987
|
Methods of test for rubber and plastics hoses and hose assemblies. Determination of dimensions Measurement of length of hoses and hose assemblies |
DIN EN ISO 4641:2016-07 (Draft)
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
ONORM EN 12115 : OCT 2011
|
RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
PREN 1360 : DRAFT 2011
|
RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
BS ISO 27127:2014
|
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
13/30275849 DC : 0
|
BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
ISO 2928:2003
|
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification |
DIN EN ISO 28017:2015-12
|
RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015) |
11/30250270 DC : 0
|
BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
15/30317636 DC : 0
|
BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING |
DIN EN ISO 10619-3:2012-03
|
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
DIN EN 15889 E : 2011
|
FIRE-FIGHTING HOSES - TEST METHODS |
15/30317648 DC : 0
|
BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
15/30317663 DC : 0
|
BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
ISO 11237:2017
|
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
BS ISO 13363:2004
|
Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification |
16/30312462 DC : 0
|
BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
BS ISO 11237-1:2005
|
Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications |
BS ISO 2929:2014
|
Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification |
BS ISO 11237-2:2006
|
Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
BS 5173-102.1(1985) : LATEST
|
METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC PRESSURE TESTS - HYDROSTATIC TESTS |
BS ISO 1403 : 1995 AMD 9703
|
RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS |
I.S. EN 16820:2017
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
UNI EN ISO 1402 : 2009
|
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDROSTATIC TESTING |
BS ISO 1436:2017
|
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
UNE-EN 1762:2017
|
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
BS EN ISO 3821:2010
|
Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
I.S. EN ISO 3949:2014
|
PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
ISO 2929:2014
|
Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification |
ISO 11237-1:2004
|
Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications |
BS EN 16436-1 : 2014
|
RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
UNE-EN 16820:2018
|
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
BS EN 13766:2010
|
Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
ISO 1436-2:2005
|
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
UNE-EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
ISO 18752:2014
|
Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
BS EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
UNE-EN ISO 1402:2010
|
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
BS EN 854:2015
|
Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
ISO 5774:2016
|
Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
BS EN ISO 14113:2013
|
Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
BS EN 1761:1999
|
Rubber hoses and hose assemblies for fuel truck delivery. Specification |
UNI EN 12115 : 2011
|
RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
DIN EN 857:2016-09
|
RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
DIN EN 1762:2004-07
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
DIN EN 854:2016-09
|
RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
EN 13482:2013
|
Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
DIN EN ISO 6224:2012-02
|
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
EN 13483:2013
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
UNE-EN 12757-1:2006+A1:2010
|
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
UNE-EN 12757-1:2006
|
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |