ISO 5660-1:2015
Current
Current
The latest, up-to-date edition.
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
20-03-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 5660-1:2015 specifies a method for assessing the heat release rate and dynamic smoke production rate of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external igniter. The heat release rate is determined by measurement of the oxygen consumption derived from the oxygen concentration and the flow rate in the combustion product stream. The time to ignition (sustained flaming) is also measured in this test.
The dynamic smoke production rate is calculated from measurement of the attenuation of a laser light beam by the combustion product stream. Smoke obscuration is recorded for the entire test, regardless of whether the specimen is flaming or not.
| DevelopmentNote |
Supersedes ISO/FDIS 5660-1 & ISO 5660-2. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
59
|
| ProductNote |
NEW CHILD AMD 1 2019 IS NOW ADDED
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 5660-1:2019 | Identical |
| NF ISO 5660-1 : 2015 | Identical |
| BS ISO 5660-1:2015 | Identical |
| JIS A 1316:2022 | Identical |
| PD CEN/TS 15912:2012 | Durability of reaction to fire performance. Classes of fire-retardant treated wood-based product in interior and exterior end use applications |
| DD IEC/TS 60695-8-3:2008 | Fire hazard testing Heat release. Heat release of insulating liquids used in electrotechnical products |
| 07/30173831 DC : 0 | BS EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE |
| CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| BS ISO/TR 14696:1999 | Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL) |
| 16/30342722 DC : 0 | BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES |
| UNE-EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| XP CEN/TS 14972 : 2011 XP | FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| ONORM ONR CEN/TS 14972 : 2011 | FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION (CEN/TS 14972:2011) |
| 07/30147204 DC : 0 | BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS |
| 14/30295822 DC : 0 | BS 8489-7 - FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 7: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR THE PROTECTION OF LOW HAZARD OCCUPANCIES |
| 13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
| 06/30117321 DC : DRAFT SEP 2006 | ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY |
| 10/30228138 DC : 0 | BS ISO 15779 - CONDENSED-AEROSOL FIRE-EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS FOR COMPONENTS AND SYSTEM DESIGN, INSTALLATION AND MAINTENANCE - GENERAL REQUIREMENTS |
| BS ISO 17554:2014 | Reaction to fire tests. Mass loss measurement |
| DD ISO/TS 14934-4:2007 | Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests |
| PD CEN/TR 15276-1:2009 | Fixed firefighting systems. Condensed aerosol extinguishing systems Requirements and test methods for components |
| ISO 24473:2008 | Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW |
| S.R. CEN/TS 15912:2012 | DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS |
| BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| UNI EN 15004-1 : 2008 | FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE |
| UNI EN ISO 25762 : 2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ISO 12828-2:2016 | Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
| XP CEN/TS 45545-2 : 2009 XP | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO 5660-2:2002 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
| ISO/TR 5660-3:2003 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
| NFPA 555 : 2017 | METHODS FOR EVALUATING POTENTIAL FOR ROOM FLASHOVER |
| UNE-EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| BS EN ISO 5659-2:2017 | Plastics. Smoke generation Determination of optical density by a single-chamber test |
| CEN/TS 14972:2011 | Fixed firefighting systems - Watermist systems - Design and installation |
| EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| EN 16755:2017 | Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications |
| EN 60695-1-21:2016 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| BS 6203:2003 | Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications |
| DEFSTAN 07-247(PT1)/2(2006) : 2006 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| IEC TS 60695-1-40:2002 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| ISO 17554:2014 | Reaction to fire tests Mass loss measurement |
| 06/30116005 DC : DRAFT MAY 2006 | ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS ISO TR 9705-2:2001 | Reaction to fire tests. Full scale room tests for surface products Technical background and guidance |
| DIN EN ISO 25762:2012-04 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| BS ISO 11907-4:1998 | Plastics. Smoke generation. Determination of the corrosivity of fire effluents Dynamic decomposition method using a conical radiant heater |
| CEN/TR 14745:2003 | Solid Recovered Fuels |
| PD CEN/TR 14745:2003 | Solid recovered fuels |
| 05/30103142 DC : 0 | BS EN 15276 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| ISO/TR 13387-4:1999 | Fire safety engineering — Part 4: Initiation and development of fire and generation of fire effluents |
| BS ISO 29473:2010 | Fire tests. Uncertainty of measurements in fire tests |
| BS ISO TR 11925-1:1999 | Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability |
| 04/30119106 DC : DRAFT AUG 2004 | EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| AFAP-1 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS |
| ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials — Their development and application |
| I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO/TS 5660-4:2016 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release |
| ISO 19703:2010 | Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| S.R. CEN TR 15276-1:2009 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ASTM E 2102 : 2017 : REDLINE | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM F 3214 : 2018 | Standard Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices |
| EN 15004-1:2008 | Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified) |
| DIN EN ISO 5659-2:2016-02 (Draft) | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| IEC 60695-8-1:2016 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| 03/317997 DC : DRAFT DEC 2003 | ISO/DIS 6182-10 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 10: REQUIREMENTS AND TEST METHODS FOR DOMESTIC SPRINKLERS |
| PD IEC/TR 60695-1-21:2008 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods |
| BS EN ISO 15791-1:2013 | Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| I.S. EN ISO 5659-2:2017 | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| DIN EN 15004-1:2008-09 | FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN ISO 15791-1:2013 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
| I.S. EN ISO 13927:2015 | PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR (ISO 13927:2015) |
| BS 476-10:2009 | Fire tests on building materials and structures Guide to the principles, selection, role and application of fire testing and their outputs |
| UNI CEI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| 01/124426 DC : 0 | ISO/CD 21367 - PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTATED SPECIMENS |
| 08/30183661 DC : DRAFT SEP 2008 | BS ISO 29473 - FIRE TESTS - UNCERTAINTY OF MEASUREMENTS IN FIRE TESTS |
| 10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| 13/30234849 DC : 0 | BS EN ISO 13927 - PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR |
| BS ISO TR 5658-1:1997 | Reaction to fire tests. Spread of flame Guidance on flame spread |
| 18/30369843 DC : DRAFT APR 2018 | BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY |
| UNI CEN/TS 15912 : 2012 | DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS |
| 14/30287765 DC : 0 | BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| BS EN 60695-1-20:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance |
| BS ISO/TR 11696-2:1999 | Uses of reaction to fire test results Fire hazard assessment of construction products |
| NF ISO 21367 : 2008 | PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTED SPECIMENS |
| BS ISO/TR 11696-1:1999 | Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products |
| PD ISO/TS 5660-4:2016 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release |
| BS ISO 14934-4:2014 | Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests |
| BS ISO 12828-1:2011 | Validation method for fire gas analysis Limits of detection and quantification |
| CEI EN 60695-8-1 : 2009 | FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE |
| I.S. EN 60695-8-2:2017 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
| ISO/TR 11925-1:1999 | Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
| UNE-EN 60695-8-1:2017 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| CEI 89-37 : 2014 | FIRE HAZARD TESTING - PART 8-3: HEAT RELEASE - HEAT RELEASE OF INSULATING LIQUIDS USED IN ELECTROTECHNICAL PRODUCTS |
| BS 7825-3.9:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Flammability characteristics |
| PREN 15004-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE (ISO 14520-1:2015, MODIFIED) |
| ISO 12828-1:2011 | Validation method for fire gas analysis — Part 1: Limits of detection and quantification |
| ISO 11907-4:1998 | Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| ISO 29473:2010 | Fire tests — Uncertainty of measurements in fire tests |
| S.R. CEN/TS 14972:2011 | FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| UNE-EN 16755:2018 | Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications |
| ISO/TS 14934-4:2007 | Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests |
| ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
| BS EN 15004-1:2008 | Fixed firefighting systems. Gas extinguishing systems Design, installation and maintenance |
| UNE-CEN/TS 15912:2012 EX | Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications |
| ASTM E 1623 : 2016 : REDLINE | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| UNI CEN/TS 14972 : 2011 | FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| ISO 14934-4:2014 | Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests |
| IEC TS 60695-8-3:2008 | Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products |
| ISO/TS 5660-3:2012 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
| ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
| ISO/TS 14934-1:2002 | Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles |
| IEC TR 60695-8-2:2008 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| DIN EN ISO 13927:2015-08 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| BS EN 60695-1-21:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods |
| IEC 60695-6-2:2011 | Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods |
| IEC 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| ISO/TR 10093:2017 | Plastics Fire tests Standard ignition sources |
| EN ISO 15791-1:2013 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| UNI EN ISO 15791-1 : 2014 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
| BS ISO/TR 14697:1997 | Fire tests. Guidance on the choice of substrates for building products |
| AFAP-5 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - HEAT RELEASE RATE |
| BS DD8489-7(2011) : 2011 | FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 7: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR THE PROTECTION OF LOW HAZARD OCCUPANCIES |
| BS 8489-7:2016 | Fixed fire protection systems. Industrial and commercial watermist systems Tests and requirements for watermist systems for the protection of low hazard occupancies |
| 14/30274909 DC : 0 | BS EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 60695-1-21:2016 | FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS ISO 25762 : 2009 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| 17/30353409 DC : 0 | BS 15276-1 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 10/30237345 DC : DRAFT DEC 2010 | BS 6853 AMD2 - CODE OF PRACTICE FOR FIRE PRECAUTIONS IN THE DESIGN AND CONSTRUCTION OF PASSENGER CARRYING TRAINS |
| BS ISO/TR 13387-4:1999 | Fire safety engineering Initiation and development of fire and generation of fire effluents |
| ASTM E 2067 : 2015 : REDLINE | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| BS DD246(1999) : 1999 | RECOMMENDATIONS FOR THE USE OF THE CONE CALORIMETER |
| UNI CEI 11170-3 : 2005 | RAILWAY AND TRAMWAY VEHICLES - GUIDELINES FOR FIRE PROTECTION OF RAILWAY, TRAMWAY AND GUIDED PATH VEHICLES - EVALUATION OF FIRE BEHAVIOUR OF MATERIALS - LIMITS OF ACCEPTANCE |
| 08/30192184 DC : 0 | ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY |
| 09/30196057 DC : DRAFT FEB 2009 | BS ISO 15779 - CONDENSED-AEROSOL FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - GENERAL REQUIREMENTS |
| ISO/TS 17431:2006 | Fire tests— Reduced-scale model box test |
| UNI CEN/TR 15276-1 : 2009 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| CEN/TR 15276-1:2009 | Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components |
| PD ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace |
| 14/30280977 DC : 0 | BS ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY |
| UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| PD ISO/TR 16576:2017 | Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria |
| BS ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| DD ISO/TS 5658-1:2006 | Reaction to fire tests. Spread of flame Guidance on flame spread |
| ASTM E 1740 : 2015 : REDLINE | Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| UNE-CEN/TS 14972:2014 | Fixed firefighting systems - Watermist systems - Design and installation |
| DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
| I.S. EN ISO 25762:2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009) |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| ISO/TR 17252:2008 | Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
| I.S. EN 60695-1-20:2016 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| I.S. EN 60695-8-1:2017 | FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE |
| ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
| PREN 15276-1 : DRAFT 2017 | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| ISO 5660-4:2008 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility |
| ISO/TR 13571-2:2016 | Life-threatening components of fire Part 2: Methodology and examples of tenability assessment |
| ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO 14934-3:2012 | Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method |
| ISO/TR 10840:1993 | Plastics Burning behaviour Guidance for development and use of fire tests |
| IEC TR 60695-1-21:2008 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| UNE-EN ISO 13927:2016 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| ISO 13927:2015 | Plastics — Simple heat release test using a conical radiant heater and a thermopile detector |
| BS IEC/TS 60695-8-2:2001 | Fire hazard testing. Heat release Summary and relevance of test methods |
| BS EN 60695-8-2:2017 | Fire hazard testing Heat release. Summary and relevance of test methods |
| IEC 60695-1-21:2016 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| UNE-EN ISO 15791-1:2014 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| UNE-EN ISO 5659-2:2018 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| 03/112565 DC : DRAFT AUG 2003 | ISO 6182-9 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEM - PART 9: REQUIREMENTS AND TEST METHODS FOR WATER MIST NOZZLES |
| ISO 6182-9:2005 | Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles |
| 12/30228745 DC : 0 | BS ISO 6182-10 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 10: REQUIREMENTS AND TEST METHODS FOR DOMESTIC SPRINKLERS |
| BS EN ISO 13927:2015 | Plastics. Simple heat release test using a conical radiant heater and a thermopile detector |
| ISO 6182-10:2014 | Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers |
| ISO 15791-1:2014 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance |
| ISO 25762:2009 | Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| EN ISO 5659-2:2017 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| EN ISO 25762:2012 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| EN ISO 13927:2015 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| I.S. EN 16755:2017 | DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD PRODUCTS IN INTERIOR AND EXTERIOR END USE APPLICATIONS |
| ISO 14520-1:2015 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements |
| BS ISO TR 9122-4:1993 | Toxicity testing of fire effluents The fire model (furnaces and combustion apparatus used in small-scale testing) |
| DIN EN 15004-1:2016-09 (Draft) | FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE |
| BS EN ISO 25762:2012 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| BS EN 60695-8-1:2017 | Fire hazard testing Heat release. General guidance |
| 13/30292037 DC : 0 | BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS |
| IEC TS 60695-8-2:2000 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| 06/30133753 DC : DRAFT MAY 2006 | ISO 24473 - FIRE TESTS - OPEN CALORIMETRY - MEASUREMENT OF THE RATE OF PRODUCTION OF HEAT AND COMBUSTION PRODUCTS FOR FIRES OF UP TO 20MW |
| 08/30154274 DC : DRAFT MAR 2008 | BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
| PD ISO/TS 5660-3:2012 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement |
| PD ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials. Their development and application |
| 15/30318694 DC : 0 | BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
| 06/30153120 DC : DRAFT JULY 2006 | |
| 13/30246948 DC : 0 | BS ISO 17554 - REACTION TO FIRE TESTS - MASS LOSS MEASUREMENT |
| BS ISO 14697:2007 | Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products |
| IEC 60695-1-12:2015 | Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering |
| BS ISO 14520-1:2006 | Gaseous fire-extinguishing systems. Physical properties and system design General requirements |
| UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
| ISO/TR 16576:2017 | Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria |
| ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
| I.S. EN 15004-1:2008 | FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE |
| FD CEN/TR 15276-1 : 2009 FD | FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| ISO/TS 5658-1:2006 | Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
| ISO 29904:2013 | Fire chemistry — Generation and measurement of aerosols |
| ISO 15928-4:2017 | Houses — Description of performance — Part 4: Fire safety |
| ISO/TR 11696-2:1999 | Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products |
| DIN EN ISO 15791-1:2014-05 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| 13/30277762 DC : 0 | BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| UNE-EN 60695-1-21:2017 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| PD IEC/TR 60695-8-2:2008 | Fire hazard testing Heat release. Summary and relevance of test methods |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| CEN/TS 15912:2012 | Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications |
| EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| EN 60695-8-1:2017 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 5657:1997 | Reaction to fire tests Ignitability of building products using a radiant heat source |
| DIN 50055:1989-03 | LIGHT MEASURING BEAM FOR TESTING SMOKE DEVELOPMENT |
| ISO/TS 14934-1:2002 | Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO/TR 3814:1989 | Tests for measuring "reaction-to-fire" of building materials — Their development and application |
| BS 6809:1987 | Method for calibration of radiometers for use in fire testing |
| ASTM E 662 : 2017-02 | TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| BS 7904:1998 | Guide to smoke measurement units. Their basis and use in smoke opacity test methods |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| AS/NZS 1720.4:2019 | Timber structures Fire resistance of timber elements |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.