ISO 6353-3:1987
Current
Current
The latest, up-to-date edition.
Reagents for chemical analysis — Part 3: Specifications — Second series
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
10-12-1987
€192.00
Excluding VAT
| Committee |
ISO/TC 47
|
| DocumentType |
Standard
|
| Pages |
75
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| JIS K 8593:2015 | Identical |
| JIS K 8161:2015 | Identical |
| NBN T 01 203 : 1988 | Identical |
| NF ISO 6353-3 : 1988 | Identical |
| BS 6376-3:1989 | Similar to |
| PN ISO 6353-3 : 2004 | Identical |
| UNE 55539-7:1994 | Not Equivalent |
| UNE 55539-6:1994 | Not Equivalent |
| UNE 55539-2:1994 | Not Equivalent |
| UNE 55539-11:1994 | Not Equivalent |
| UNE 55539-8:1994 | Not Equivalent |
| UNE 55539-9:1994 | Not Equivalent |
| UNE 55539-5:1994 | Not Equivalent |
| UNE 55539-4:1994 | Not Equivalent |
| UNE 55539-10:1994 | Not Equivalent |
| UNE 55539-3:1994 | Not Equivalent |
| PREN 932-5 : DRAFT 2009 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| BS ISO 25761:2014 | Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen |
| ISO 25761:2014 | Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen |
| I.S. EN ISO 18753:2017 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ABSOLUTE DENSITY OF CERAMIC POWDERS BY PYCNOMETER (ISO 18753:2017) |
| NF ISO 28641 : 2010 | RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| 15/30303049 DC : 0 | BS ISO 21033 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TRACE ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP-OES) |
| ISO 6293-2:1998 | Petroleum products — Determination of saponification number — Part 2: Potentiometric titration method |
| 13/30278479 DC : 0 | BS ISO 25761 - PLASTICS - POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF BASICITY (TOTAL AMINE VALUE), EXPRESSED AS PERCENT NITROGEN |
| 07/30172878 DC : 0 | BS ISO 10307-1 - PETROLEUM PRODUCTS - TOTAL SEDIMENT IN RESIDUAL FUEL OILS - PART 1: DETERMINATION BY HOT FILTRATION |
| ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders |
| BS ISO 21033:2016 | Animal and vegetable fats and oils. Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| BS ISO 6851:2001 | Photography. Processing waste. Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
| BS ISO 14900:2017 | Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number |
| BS EN ISO 20565-1:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) Apparatus, reagents, dissolution and determination of gravimetric silica |
| BS 2000-136.1(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - COLOUR-INDICATOR TITRATION METHOD |
| 03/113238 DC : DRAFT SEP 2003 | BS ISO 15028 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF HYDROLYSABLE CHLORINE |
| BS ISO 16000-23:2009 | Indoor air Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials |
| I.S. EN 62326-20:2016 | PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS |
| I.S. EN ISO 21079-1:2008 | CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5 PERCENT TO 45 PERCENT OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS AND DISSOLUTION |
| ISO 14900:2017 | Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number |
| IEC 62326-20:2016 | Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
| ISO 21079-1:2008 | Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents and dissolution |
| EN 12286:1998/A1:2000 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| EN 12139:1999 | Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC |
| DIN EN ISO 14896:2009-07 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
| EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
| EN ISO 26845:2008 | Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008) |
| DIN ISO 9120:2005-08 | Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method (ISO 9120:1997) |
| BS ISO 6849:1996 | Photography. Processing wastes. Determination of boron |
| ISO 6851:2001 | Photography — Processing waste — Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
| BS ISO 6850:1994 | Photography. Processing wastes. Determination of nitrate by a spectrometric method using brucine |
| BS ISO 22016:2015 | Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods |
| BS 2000-136.2(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - POTENTIOMETRIC TITRATION METHOD |
| BS EN 62326-20:2016 | Printed boards Printed circuit boards for high-brightness LEDs |
| DIN EN ISO 10058-1:2009-09 | CHEMICAL ANALYSIS OF MAGNESITE AND DOLOMITE REFRACTORY PRODUCTS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
| 14/30286016 DC : 0 | BS EN ISO 12966-4 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF METHYL ESTERS OF FATTY ACIDS - PART 4: CAPILLARY GAS CHROMATOGRAPHIC METHOD |
| BS ISO 7766:2003 | Processing photographic wastes. Analysis of cyanides. Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| DIN EN ISO 26845:2008-06 | CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICAL ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY (AAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) METHODS |
| PIMA IT4.37 : 0 | FOR PHOTOGRAPHY (PROCESSING) - EFFLUENTS - IDENTIFICATION AND ANALYTICAL METHODS |
| 13/30261099 DC : 0 | BS ISO 17947 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF FINE SILICON NITRIDE POWDERS |
| BS ISO 7760:2001 | Photography. Processing waste. Determination of hydroquinone |
| ISO 14897:2002 | Plastics — Polyols for use in the production of polyurethane — Determination of water content |
| 07/30158191 DC : DRAFT AUG 2007 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| BS EN ISO 10058-1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Apparatus, reagents, dissolution and determination of gravimetric silica |
| BS ISO 17947:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders |
| BS ISO 14898 : 1999 | PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF ACIDITY |
| BS EN 62024-1:2008 | High frequency inductive components. Electrical characteristics and measuring methods Nanohenry range chip inductor |
| BS ISO 9285:1997 | Abrasive grains and crude. Chemical analysis of fused aluminium oxide |
| 07/30160659 DC : 0 | BS EN 62024-1 - HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 1: NANOHENRY RANGE CHIP INDUCTOR |
| BS ISO 18917:1999 | Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide |
| BS PD ISO/TS 21033 : 2011 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TRACE ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP-OES) |
| 08/30171147 DC : DRAFT JULY 2008 | BS ISO 16000-24 - INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUNDS AND CARBONYL COMPOUNDS WITHOUT FORMALDEHYDE CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| IEC 62024-1:2017 | High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor |
| EN ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| ISO 21340:2017 | Test methods for fibrous activated carbon |
| NF ISO 16000-23 : 2010 | INDOOR AIR - PART 23: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF FORMALDEHYDE CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| IP 136 SECTION 1 : 1998 | PETROLEUM PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - PART 1: COLOUR-INDICATOR TITRATION METHOD |
| ISO 7766:2003 | Processing photographic wastes — Analysis of cyanides — Determination of hexacyanoferrate (II) and hexacyanoferrate (III) by spectrometry |
| ISO 14896:2009 | Plastics — Polyurethane raw materials — Determination of isocyanate content |
| ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products — Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
| I.S. EN 932-5:2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION |
| I.S. EN ISO 14896:2009 | PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT |
| I.S. EN ISO 4895:2014 | PLASTICS - LIQUID EPOXY RESINS - DETERMINATION OF TENDENCY TO CRYSTALLIZE (ISO 4895:2014) |
| 17/30343039 DC : 0 | BS ISO 16000-24 - INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| 13/30246099 DC : 0 | BS ISO 17094 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT |
| BS ISO 10349-1:2002 | Photography. Photographic-grade chemicals. Test methods General |
| BS ISO 6853:2001 | Photography. Processing waste. Determination of ammoniacal nitrogen (microdiffusion method) |
| 17/30335356 DC : DRAFT MAY 2017 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| 13/30261093 DC : 0 | BS ISO 17942 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF BORON NITRIDE POWDERS |
| 01/120853 DC : DRAFT FEB 2001 | ISO/DIS 17710 PLASTICS - POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF UNSATURATION BY MICROTITRATION |
| BS ISO 10348:1993 | Photography. Processing wastes. Determination of silver content |
| 08/30166877 DC : DRAFT FEB 2008 | BS ISO 27447 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| BS ISO 21340:2017 | Test methods for fibrous activated carbon |
| BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
| BS ISO 17942:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of boron nitride powders |
| 17/30343036 DC : 0 | BS ISO 16000-23 - INDOOR AIR - PART 23: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| BS 2000-131(1998) : 1998 | PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
| 07/30174246 DC : 0 | BS EN ISO 15304 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CISTRANS, SATURATED, MONO- AND POLYUNSATURATED FATTY ACIDS IN VEGETABLE OR NON-RUMINANT OILS AND FATS - CAPILLARY GAS CHROMATOGRAPHIC METHOD |
| ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer |
| BS ISO 14897:2002 | Plastics. Polyols for use in the production of polyurethane. Determination of water content |
| DIN EN ISO 20565-1:2009-06 | CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
| EN IEC 62024-1:2018 | High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor |
| ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde |
| ISO 14899:2001 | Plastics — Polyols for use in the production of polyurethane — Determination of basicity |
| I.S. EN ISO 10058-1:2008 | CHEMICAL ANALYSIS OF MAGNESITE AND DOLOMITE REFRACTORY PRODUCTS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
| I.S. EN ISO 21078-1:2008 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORON(3) OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES |
| DD ISO/TS 21033 : 2011 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TRACE ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP-OES) |
| ISO 21033:2016 | Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO 17942:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders |
| ISO 17710:2002 | Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration |
| ISO 16000-24:2009 | Indoor air — Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
| ISO 26603:2017 | Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine |
| ISO 6853:2001 | Photography — Processing waste — Determination of ammoniacal nitrogen (microdiffusion method) |
| DIN EN 932-5:2012-05 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| BS EN ISO 26845:2008 | Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
| ISO 6849:1996 | Photography — Processing wastes — Determination of boron |
| BS ISO 4895 : 97 AMD 10690 | PLASTICS - LIQUID EPOXY RESINS - DETERMINATION OF TENDENCY TO CRYSTALLIZE |
| BS ISO 14899:2001 | Plastics. Polyols for use in the production of polyurethane. Determination of basicity |
| PIMA IT4.39 : 1998 | PHOTOGRAPHY (PROCESSING) - EFFLUENTS - SPECTROPHOTOMETRIC DETERMINATION OF CHLORINE |
| BS ISO 10307-1:2009 | Petroleum products. Total sediment in residual fuel oils Determination by hot filtration |
| 16/30339733 DC : 0 | BS EN ISO 18753 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ABSOLUTE DENSITY OF CERAMIC POWDERS BY PYKNOMETER |
| DIN EN ISO 21079-1:2008-08 | CHEMICAL ANALYSIS OF REFRACTORIES CONTAINING ALUMINA, ZIRCONIA AND SILICA - REFRACTORIES CONTAINING 5% TO 45% OF ZRO[2] (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS AND DISSOLUTION |
| 09/30205556 DC : 0 | BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| 13/30277527 DC : 0 | BS EN ISO 4895 - PLASTICS - LIQUID EPOXY RESINS - DETERMINATION OF TENDENCY TO CRYSTALLIZE |
| 14/30276977 DC : 0 | BS ISO 22016 - DETERMINATION OF SULFUR IN REFRACTORY PRODUCTS AND RAW MATERIALS BY GRAVIMETRIC, PHOTOMETRIC AND TITRIMETRIC METHODS |
| BS EN ISO 21079-1:2008 | Chemical analysis of refractories containing alumina, zirconia and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Apparatus, reagents and dissolution |
| BS ISO 16000-24:2009 | Indoor air Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
| DIN EN ISO 21078-1:2008-04 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
| ISO 6850:1994 | Photography — Processing wastes — Determination of nitrate by a spectrometric method using brucine |
| BS ISO 27447:2009 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials |
| ISO 10307-1:2009 | Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration |
| ISO 16000-23:2009 | Indoor air — Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials |
| ISO 10349-1:2002 | Photography — Photographic-grade chemicals — Test methods — Part 1: General |
| ISO 7760:2001 | Photography — Processing waste — Determination of hydroquinone |
| I.S. EN ISO 20565-1:2008 | CHEMICAL ANALYSIS OF CHROME-BEARING REFRACTORY PRODUCTS AND CHROME-BEARING RAW MATERIALS (ALTERNATIVE TO THE X-RAY FLUORESCENCE METHOD) - PART 1: APPARATUS, REAGENTS, DISSOLUTION AND DETERMINATION OF GRAVIMETRIC SILICA |
| I.S. EN 62878-1-1:2015 | DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS |
| BS EN 12139:1999 | Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC |
| BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
| ISO 15193:2009 | In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures |
| ISO 26845:2008 | Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
| BS EN ISO 4895:2014 | Plastics. Liquid epoxy resins. Determination of tendency to crystallize |
| EN ISO 10058-1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 10058-1:2008) |
| EN ISO 21079-1:2008 | Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008) |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
| EN ISO 14896:2009 | Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009) |
| EN ISO 4895:2014 | Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014) |
| EN ISO 20565-1:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica (ISO 20565-1:2008) |
| ISO/TS 21033:2011 | Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| ISO 14898:1999 | Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity |
| BS EN ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
| IP 136 SECTION 2 : 1999 | PETROLEUM PRODUCTS - DETERMINATION OF SAPONIFICATION NUMBER - PART 2: POTENTIOMETRIC TITRATION METHOD |
| BS ISO 17710:2002 | Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration |
| 16/30329930 DC : 0 | BS EN ISO 6246 - PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
| 09/30184110 DC : 0 | BS ISO 16000-25 - INDOOR AIR - PART 25: DETERMINATION OF THE EMISSION OF SEMI-VOLATILE ORGANIC COMPOUNDS BY BUILDING PRODUCTS - MICRO-CHAMBER METHOD |
| BS EN ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pycnometer |
| 06/30160122 DC : 0 | ISO/DIS 26603 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF TOTAL CHLORINE |
| BS ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment Removal of formaldehyde |
| BS ISO 28641:2010 | Rubber compounding ingredients. Organic chemicals. General test methods |
| BS ISO 26603:2017 | Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine |
| 03/113239 DC : DRAFT SEP 2003 | BS ISO 15064 - PLASTICS - AROMATIC ISOCYANATES FOR USE IN THE PRODUCTION OF POLYURETHANES - DETERMINATION OF THE ISOMER RATIO IN TOLUENE DIISOCYANATE |
| ANSI/PIMA IT4.41:1999 | PHOTOGRAPHY (PROCESSING) - FREE CYANIDE AT PH6, ANALYSIS FOR |
| I.S. EN IEC 62024-1:2018 | HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 1: NANOHENRY RANGE CHIP INDUCTOR |
| DIN ISO 16000-24:2013-01 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS (ISO 16000-24:2009) |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| I.S. EN 62024-1:2008 | HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 1: NANOHENRY RANGE CHIP INDUCTOR |
| NF ISO 16000-24 : 2010 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUNDS (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| ISO 9285:1997 | Abrasive grains and crude — Chemical analysis of fused aluminium oxide |
| ISO 22016:2015 | Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods |
| ISO 28641:2010 | Rubber compounding ingredients — Organic chemicals — General test methods |
| ISO 10348:1993 | Photography — Processing wastes — Determination of silver content |
| I.S. EN ISO 26845:2008 | CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICAL ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY (AAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICPAES) METHODS |
| ISO 10058-1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica |
| BS EN ISO 14896:2009 | Plastics. Polyurethane raw materials. Determination of isocyanate content |
| ISO 4895:2014 | Plastics — Liquid epoxy resins — Determination of tendency to crystallize |
| ISO 20565-1:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica |
| BS EN 12286:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures |
| DIN EN ISO 4895:2014-11 | PLASTICS - LIQUID EPOXY RESINS - DETERMINATION OF TENDENCY TO CRYSTALLIZE (ISO 4895:2014) |
| EN 62326-20:2016 | Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
| UNE-EN ISO 4895:2014 | Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014) |
| UNE-EN 932-5:2012 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| BS 2000-375(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-375: PETROLEUM PRODUCTS - TOTAL SEDIMENT IN RESIDUAL FUEL OILS - PART 1: DETERMINATION OF HOT FILTRATION |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.