ISO 6803:2017
Current
Current
The latest, up-to-date edition.
Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-03-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 6803:2017 describes hose impulse testing, without flexing, of rubber or plastics hydraulic hose assemblies at both high and low impulse pressures. The high-pressure testing is carried out at pressures greater than 3 MPa and the low-pressure testing at pressures from 1,5 MPa to 3 MPa. The test procedure is applicable to hydraulic hose assemblies that are subject to pulsating pressures in service which are included in the product requirements.
NOTE Impulse test procedures with flexing can be found in ISO 6802.
| DevelopmentNote |
Supersedes ISO/DIS 6803. (03/2017)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 6803 : 2017 | Identical |
| NEN EN ISO 6803 : 2017 | Identical |
| NS EN ISO 6803 : 2017 | Identical |
| I.S. EN ISO 6803:2017 | Identical |
| PN EN ISO 6803 : 2017 | Identical |
| SN EN ISO 6803 : 2017 | Identical |
| UNI EN ISO 6803 : 2008 | Identical |
| UNE-EN ISO 6803:2017 | Identical |
| BS EN ISO 6803:2017 | Identical |
| EN ISO 6803:2017 | Identical |
| DIN EN ISO 6803:2015-10 (Draft) | Identical |
| UNI EN ISO 6803:2017 | Identical |
| DIN EN ISO 6803:2017-07 | Identical |
| IS 443 : Part 6 : 2022 | Identical |
| GOST ISO 6803 : 2013 | Identical |
| SAC GB/T 5568 : 1994 | Identical |
| BS ISO 6803 : 1994 AMD 9707 | Identical |
| UNI 9540 : 1990 | Similar to |
| NEN ISO 6803 : 1995 | Identical |
| 13/30265681 DC : 0 | BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD |
| BS ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
| BS 5173-102.6(1985) : LATEST | METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC PRESSURE TESTS - PRESSURE IMPULSE TEST WITH FLEXING FOR HIGH PRESSURE HYDRAULIC HOSES (INVERTED 'U' CONFIGURATION) |
| 11/30238916 DC : 0 | BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| 09/30194969 DC : 0 | BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| BS ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification Refrigerant 134a |
| 03/311277 DC : DRAFT JAN 2004 | ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| BS EN ISO 18752:2016 | Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
| 04/30110528 DC : 0 | ISO 6802 - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| 98/714984 DC : DRAFT SEP 1998 | ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS |
| 05/30129301 DC : DRAFT FEB 2005 | ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 11237:2017 | Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| 07/30175157 DC : DRAFT DEC 2007 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
| BS ISO 11237-1:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications |
| 00/715333 DC : 0 | ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| ISO 3949:2009 | Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
| 07/30175126 DC : DRAFT DEC 2007 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| BS ISO 18752 : 2014 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 3862:2017 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
| ISO 8028:2017 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
| BS ISO 23297:2017 | Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification |
| ISO 17165-1:2007 | Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements |
| ISO 4079-2:2005 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| UNE-EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| PD ISO/TR 10771-2:2008 | Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Rating method |
| UNE-EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN 857:2015 | Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
| I.S. EN 854:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN ISO 6802:2010-03 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| DIN EN 853:2016-09 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| BS ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems. Specification |
| ISO 1436-1:2001 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| 03/311096 DC : DRAFT DEC 2003 | ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| 16/30335320 DC : 0 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies Dimensions and requirements |
| I.S. EN ISO 8032:1999 | RUBBER AND PLASTICS HOSE ASSEMBLIES - FLEXING COMBINED WITH HYDRAULIC IMPULSE TEST (HALF-OMEGA TEST) |
| 16/30335329 DC : 0 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| UNI EN 1829-2 : 2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| 03/311275 DC : DRAFT DEC 2003 | ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 15/30293934 DC : 0 | BS EN ISO 6802 - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| BS ISO 4079:2017 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| ISO 4079:2017 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
| EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
| EN ISO 6802:2008 | Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005) |
| ISO 11237-1:2004 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications |
| ISO 4079-1:2001 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 10771-1:2015 | Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method |
| I.S. EN 856:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| BS EN ISO 9974-1:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports |
| I.S. EN 853:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| I.S. EN 857:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS 4749:1991 | Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
| BS 4586:1992 | Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
| BS 3832:1991 | Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations |
| 01/714275 DC : 0 | ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS ISO 8032 : 1997 AMD 10581 | RUBBER AND PLASTICS HOSE ASSEMBLIES - FLEXING COMBINED WITH HYDRAULIC IMPULSE TEST (HALF-OMEGA TEST) |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| ISO 19385:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification |
| ISO/TR 10771-2:2008 | Hydraulic fluid power Fatigue pressure testing of metal pressure-containing envelopes Part 2: Rating methods |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| BS EN 28028:1993 | Rubber and/or plastics hose assemblies for airless paint spraying. Specification |
| ISO 8066-1:1997 | Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 1: Refrigerant 12 |
| BS ISO 10771-1:2015 | Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes Test method |
| 03/311322 DC : DRAFT JAN 2004 | ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| BS ISO 4079-2:2005 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
| 16/30326500 DC : DRAFT JAN 2016 | BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS |
| API SPEC 17E : 2017 | SPECIFICATION FOR SUBSEA UMBILICALS |
| 07/30127452 DC : DRAFT AUG 2007 | BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| BS ISO 16301:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification |
| 05/30135263 DC : DRAFT JUN 2005 | ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| 07/30175122 DC : DRAFT DEC 2007 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| 12/30238564 DC : 0 | BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION |
| API 17E REDLINE : 2010 | SPECIFICATION FOR SUBSEA UMBILICALS |
| BS EN ISO 3949:2014 | Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification |
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
| ONORM EN ISO 6802 : 2010 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| BS EN ISO 6802:2008 | Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing |
| CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
| DIN EN ISO 3949:2016-08 (Draft) | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 2: Refrigerant 134a |
| UNI EN ISO 3949 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems Specification |
| BS EN ISO 9974-3:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B) |
| BS EN 853:2015 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
| UNE-EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| DIN EN 856:2016-09 | RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| ISO 6802:2005 | Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
| UNI EN ISO 13628-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| SAE J517_201710 | Hydraulic Hose |
| 16/30311803 DC : 0 | BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION |
| UNE-EN ISO 18752:2017 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| UNI ISO 17165-1 : 2012 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
| BS ISO 1436-2:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| 16/30335326 DC : 0 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| DIN 20043:2003-09 | STAPLE-LOCK COUPLINGS FOR HYDRAULIC POWER-TRANSMISSION CIRCUITS |
| 16/30317675 DC : 0 | BS EN ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS ISO 13628-5:2002 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| ISO 16301:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification |
| BS ISO 7241-2:2000 | Hydraulic fluid power. Quick-action couplings Test methods |
| I.S. EN ISO 3949:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| I.S. EN ISO 18752:2016 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
| BS EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
| UNI EN ISO 6802 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| ONORM EN ISO 3949 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 3862-2:2005 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
| EN ISO 3949:2014 | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009) |
| ISO 23297:2017 | Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
| BS EN ISO 8032:1999 | Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test) |
| ISO 7241-2:2000 | Hydraulic fluid power Quick-action couplings Part 2: Test methods |
| ISO 3862-1:2001 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| UNE-EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| ISO 8032:1997 | Rubber and plastics hose assemblies Flexing combined with hydraulic impulse test (half-omega test) |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| EN 855:1996 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN ISO 18752:2016 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| EN ISO 9974-2:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN 28028 : 1993 | RUBBER AND/OR PLASTICS HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN ISO 13628-5:2009 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) |
| EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| EN ISO 8032:1999 | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) |
| EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| EN ISO 9974-3:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| 08/30183047 DC : DRAFT MAY 2008 | BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| 15/30317642 DC : 0 | BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| BS ISO 19385:2017+A1:2019 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification |
| BS ISO 3862:2009 | Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| 16/30302789 DC : DRAFT APR 2016 | BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION |
| BS EN 1829-2:2008 | High-pressure water jet machines. Safety requirements Hoses, hose lines and connectors |
| 08/30178592 DC : DRAFT FEB 2008 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| BS EN ISO 13628-5:2009 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| BS ISO 11237-2:2006 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| I.S. EN ISO 13628-5:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| BS ISO 1436:2017 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| I.S. EN ISO 6802:2008 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| I.S. EN ISO 8028:2018 | RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
| I.S. EN 1829-2:2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| DIN EN ISO 6802:2015-10 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES WITH WIRE REINFORCEMENTS - HYDRAULIC IMPULSE TEST WITH FLEXING |
| ISO 11237-2:2006 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
| ISO 1436-2:2005 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 18752:2014 | Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
| BS EN 854:2015 | Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
| BS EN ISO 9974-2:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E) |
| DIN EN 857:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| DIN EN 854:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN 1829-2:2012-02 | High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors (includes Corrigendum AC:2011) |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 6802:2005 | Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
| ISO/TR 11340:1994 | Rubber and rubber products Hydraulic hose assemblies External leakage classification for hydraulic systems |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.