ISO 7635:2006
Current
Current
The latest, up-to-date edition.
Road vehicles — Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions — Test procedures
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-06-2006
€170.00
Excluding VAT
ISO 7635:2006 specifies the method of testing the air or air over hydraulic braking systems of vehicles of categories M and N (excluding M1 and N1) as defined in Annex 7 to the UN-ECE Consolidated Resolution on the Construction of Vehicles (R.E.3.), which are built to comply with UN-ECE Regulation 13/09, including supplements 1-6. Test methods covering lock actuators or the electrical regenerative braking systems of electric and hybrid vehicles are not included in this edition.
| Committee |
ISO/TC 22/SC 33
|
| DevelopmentNote |
Supersedes ISO/DIS 7635 (06/2006)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 7635 : 2006 | Identical |
| BS ISO 7635:2006 | Identical |
| NF ISO 7635 : 1991 | Identical |
| ISO 611:2003 | Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| ISO 21069-1:2004 | Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 1: Pneumatic braking systems |
| ISO 1176:1990 | Road vehicles — Masses — Vocabulary and codes |
| ISO 11452-4:2011 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods |
| ISO 11451-3:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation |
| ISO 7637-2:2011 | Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only |
| ISO 7638-2:2003 | Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage |
| ISO/TR 10605:1994 | Road vehicles — Electrical disturbances from electrostatic discharge |
| ISO 3833:1977 | Road vehicles — Types — Terms and definitions |
| ISO/TR 10305:1992 | Road vehicles — Generation of standard EM field for calibration of power density meters from 20 kHz to 1 000 MHz |
| ISO 12161:2006 | Road vehicles — Endurance braking systems of motor vehicles and towed vehicles — Test procedures |
| ISO 11452-2:2004 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology |
| ISO 7638-1:2003 | Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| ISO 11451-2:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources |
| ISO 11452-7:2003 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection |
| ISO 7637-0:1990 | Road vehicles — Electrical disturbance by conduction and coupling — Part 0: Definitions and general |
| ISO 11451-4:2013 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI) |
| ISO 21069-2:2008 | Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 2: Air over hydraulic and purely hydraulic braking systems |
| ISO 11451-1:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.