Skip to content
Please enter a keyword to search

  • ISO 7637-3:2016

    Current The latest, up-to-date edition.

    Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  01-07-2016

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 7637-3:2016 defines bench test methods to evaluate the immunity of devices under test (DUTs) to transient pulses coupled to lines other than supply lines. The test pulses simulate both fast and slow transient disturbances caused by the switching of inductive loads and relay contact bounce.

    The following three test methods are described in ISO 7637-3:2016:

    - capacitive coupling clamp (CCC) method;

    - direct capacitive coupling (DCC) method;

    - inductive coupling clamp (ICC) method.

    ISO 7637-3:2016 applies to road vehicles fitted with nominal 12 V or 24 V electrical systems.

    For transient pulses immunity, Annex B provides recommended test severity levels in line with the functional performance status classification (FPSC) principle described in ISO 7637‑1.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 7637-3. (07/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE J 1850 : 2015 CLASS B DATA COMMUNICATIONS NETWORK INTERFACE
    BS ISO 14230-1:2012 Road vehicles. Diagnostic communication over K-Line (DoK-Line) Physical layer
    BS ISO 7634:2007 Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures
    11/30212434 DC : 0 BS ISO 14230-1 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER K-LINE (DOK-LINE) - PART 1: PHYSICAL LAYER
    OIML R 134-1 : 2006 AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    SAE J 2954 : 2017 WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
    ISO 7634:2007 Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures
    OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
    ISO 27145-6:2015 Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment
    01/714099 DC : DRAFT OCT 2001 ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS
    BS EN 45501:2015 Metrological aspects of non-automatic weighing instruments
    08/30173378 DC : DRAFT AUG 2008 BS ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS
    EN 50502:2015 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
    CEN/TR 16152:2011 Electronic fee collection - Personalisation and mounting of first mount OBE
    DEFSTAN 23-6/3(2000) : 2000 GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT
    BS ISO 11898-6:2013 Road vehicles. Controller area network (CAN) High-speed medium access unit with selective wake-up functionality
    10/30209944 DC : 0 BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD
    PD CEN/TR 16152:2011 Electronic fee collection. Personalisation and mounting of first mount OBE
    BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
    BS ISO 11898-5:2007 Road vehicles. Controller area network (CAN) High-speed medium access unit with low-power mode
    01/712457 DC : 0 ISO/DIS 11898-1 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 1: DATA LINK LAYER AND PHYSICAL SIGNALING
    I.S. EN 50436-1:2014 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    BS EN 50436-1:2014 Alcohol interlocks. Test methods and performance requirements Instruments for drink-driving-offender programs
    IEC 60839-10-1:1995 Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars
    OIML R 80-2 : 2017 ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS
    CEI 79-51 : 2006 COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS
    CISPR 25:2016 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    I.S. EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    15/30283339 DC : 0 BS ISO 11898-1 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 1: DATA LINK LAYER AND PHYSICAL SIGNALLING
    11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    13/30252783 DC : 0 BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
    16/30320037 DC : 0 BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL
    00/706017 DC : DRAFT MAR 2000 BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES
    BS ISO 11898-1:2015 Road vehicles. Controller area network (CAN) Data link layer and physical signalling
    ISO 13766-2:2018 Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety
    CEI 79-17 : 2002 PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES - PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT FOR COMMERCIAL VEHICLES
    ISO/TR 15497:2000 Road vehicles Development guidelines for vehicle based software
    I.S. EN 50502:2015 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
    ISO 11835:2002 Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance
    CAN/CSA-Z627-16 Breath alcohol ignition interlock devices
    ISO 26262-5:2011 Road vehicles Functional safety Part 5: Product development at the hardware level
    ISO 11898-5:2007 Road vehicles Controller area network (CAN) Part 5: High-speed medium access unit with low-power mode
    ISO 15763:2002 Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    UNE-EN 45501:2016 Metrological aspects of non-automatic weighing instruments
    04/30089279 DC : DRAFT FEB 2004 ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS
    UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
    UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
    12/30260709 DC : 0 BS EN 50436-1 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    12/30261045 DC : 0 BS ISO 11898-6 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 6: HIGH-SPEED MEDIUM ACCESS UNIT WITH SELECTIVE WAKE-UP FUNCTIONALITY
    OIML R 99-1 & 2 : 2008 INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    SAE J 1113/1 : 2013 ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
    OIML R 21 : 2007 TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT
    04/30115398 DC : DRAFT JUN 2004 EN TS 50436 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS
    01/712458 DC : 0 ISO/DIS 11898-2 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 2: HIGH-SPEED MEDIUM ACCESS UNIT
    06/30134700 DC : DRAFT JAN 2006 ISO 11898-5 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 5: HIGH-SPEED MEDIUM ACCESS UNIT WITH LOW-POWER MODE
    UNE-EN 50502:2016 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
    BIS IS 12508 : 2013 ELECTRIC TACHOMETER FOR AUTOMOTIVE VEHICLES - SPECIFICATION
    PREN 50502 : DRAFT 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
    PREN 45501 : DRAFT 2011 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    CEI EN 55025 : 2009 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    IEEE 802.3-2012 IEEE Standard for Ethernet
    ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
    ISO 11898-1:2015 Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
    I.S. EN 55025:2017 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS
    DIN EN 45501:2016-03 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    03/303498 DC : DRAFT FEB 2003 ISO 11898-3 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 3: LOW-SPEED, FAULT-TOLERANT, MEDIUM DEPENDENT INTERFACE
    ISO/TR 12155:1994 Commercial vehicles Obstacle detection device during reversing Requirements and tests
    13/30268103 DC : 0 BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT
    ISO/TR 7637-5:2016 Road vehicles Electrical disturbances from conduction and coupling Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    BS ISO 27145-6:2015 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment
    BS ISO 7635:2006 Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
    BS EN 55025:2017 Vehicles, boats and internal combustion engines - Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
    BS ISO 26262-5:2011 Road vehicles. Functional safety Product development at the hardware level
    06/30145537 DC : 0 EN 50436-2 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 2: INSTRUMENTS FOR GENERAL PREVENTIVE USE
    DIN ISO 11898:1995-08 ROAD VEHICLES - INTERCHANGE OF DIGITAL INFORMATION - CONTROLLER AREA NETWORK (CAN) FOR HIGH-SPEED COMMUNICATION
    07/30171041 DC : DRAFT AUG 2007 DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
    DEFSTAN 61-5(PT6)/6(2009) : 2009 NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS
    OIML R 76-1 : 2006 NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    CEI 79-9 : 1997 PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT OF CARS
    SAE J 1113/12 : 2017 ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES
    UNE-ISO 14230-1:2015 Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer.
    CEI 79-56 : 2009 BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 55025:2017/AC:2017-11 VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS (CISPR 25:2016/COR1:2017)
    ISO 14230-1:2012 Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    PREN 50436-1 : DRAFT 2012 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    ISO 7635:2006 Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures
    S.R. CEN/TR 16152:2011 ELECTRONIC FEE COLLECTION - PERSONALISATION AND MOUNTING OF FIRST MOUNT OBE
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 45501 : 2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    EN 50436-1 : 2014 COR 2016 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
    OVE/ONORM EN 50436-1 : 2014 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7637-1:2015 Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
    ISO 11452-4:2011 Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods
    ISO 7637-2:2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective