ISO/TR 10064-1:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
09-06-2020
Superseded by
Language(s)
English
Published date
12-07-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO/TR 10064-1:2017 supplements ISO 13281:2013. It provides a code of practice dealing with measurements on flanks of individual cylindrical involute gears, i.e. with the measurement of pitch, profile, helix and tangential composite characteristics. It describes measuring equipment, provides advice for gear measuring methods and for the analysis of measurement results, and discusses the interpretation of results.
Measurements using a double flank tester are not included (see ISO/TR 100642). This document only applies to involute gears.
| DocumentType |
Technical Report
|
| Pages |
89
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN NPR ISO/TR 10064-1 : 2017 | Identical |
| PD ISO/TR 10064-1:2017 | Identical |
| AGMA ISO 10064-1 : 0 | Identical |
| BS ISO TR 10064-1:1992 | Identical |
| SAC GB/Z 18620.1 : 2002 | Identical |
| BS 436-4:1996 | Spur and helical gears Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| 04/30112626 DC : DRAFT APR 2004 | ISO 21771 - GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY |
| 11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
| 02/707905 DC : DRAFT JUN 2002 | ISO/DIS 18653 - GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF GEARS |
| AGMA ISO 1328 2 : 1999 | CYLINDRICAL GEARS - ISO SYSTEM OF ACCURACY - PART 2: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
| VDI/VDE 2612:2000-05 | Profile and helix checking of involute cylindrical gears |
| VDI/VDE 2607:2000-02 | Computer-aided evaluation of profile and helix measurements on cylindrical gears with involute profile |
| AGMA ISO 18653 : A | GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
| DIN ISO 21771:2014-08 | Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007) |
| ISO/TR 10064-5:2005 | Code of inspection practice Part 5: Recommendations relative to evaluation of gear measuring instruments |
| DIN 21772:2012-07 | GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - DEFINITION OF DEVIATIONS |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| VDI/VDE 2613:2003-12 | Pitch and runout testing on gearings - Cylindrical gears, whormwheels, bevel gears |
| VDI/VDE 2608:2001-03 | Tangential composite and radial composite inspection of cylindrical gears, bevel gears, worms and worm wheels |
| VDI/VDE 2612 Blatt 5:2015-02 | Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments |
| BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS ISO 21771:2007 | Gears. Cylindrical involute gears and gear pairs. Concepts and geometry |
| API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| BS ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Basic principles, introduction and general influence factors |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
| AGMA ISO 10064-5 : A | CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS |
| API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| BS 436-5:1997 | Spur and helical gears Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| BS ISO TR 10064-2:1996 | Code of inspection practice Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 18653:2003 | Gears Evaluation of instruments for the measurement of individual gears |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| DIN ISO 18653:2009-12 | Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003) |
| DIN ISO 21771 E : 2014 | GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY (ISO 21771:2007) |
| BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| BS ISO 18653:2003 | Gears. Evaluation of instruments for the measurement of individual gears |
| PD ISO/TR 10064-5:2005 | Code of inspection practice Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 18653:2003 | Gears Evaluation of instruments for the measurement of individual gears |
| ISO 701:1998 | International gear notation Symbols for geometrical data |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 17450-1:2011 | Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
| ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
| ISO 15530-3:2011 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| ISO/TR 10064-5:2005 | Code of inspection practice Part 5: Recommendations relative to evaluation of gear measuring instruments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.