ISO 426-1:1983
|
Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 1: Non-leaded and special copper-zinc alloys |
ISO 404:2013
|
Steel and steel products — General technical delivery requirements |
IEC 61063:1991
|
Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery |
ISO 3834-1:2005
|
Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
ISO 9328-4:2011
|
Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties |
ISO 5596:1999
|
Hydraulic fluid power Gas-loaded accumulators with separator Ranges of pressures and volumes and characteristic quantities |
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
ISO 11972:2015
|
Corrosion-resistant cast steels for general applications |
ISO 13373-1:2002
|
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
ISO 9606-4:1999
|
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
ISO 2400:2012
|
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 |
ISO 6929:2013
|
Steel products — Vocabulary |
ISO/TR 15461:1997
|
Steel forgings Testing frequency, sampling conditions and test methods for mechanical tests |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
ISO 683-13:1974
|
Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
ISO 1635-2:1987
|
Seamless wrought copper and copper alloy tube Part 2: Technical conditions of delivery for condenser and heat-exchanger tubes |
ISO 6520-1:2007
|
Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
ISO 197-1:1983
|
Copper and copper alloys Terms and definitions Part 1: Materials |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
ISO 274:1975
|
Copper tubes of circular section — Dimensions |
ISO 9330-5:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
ISO/TR 9769:1991
|
Steel and iron Review of available methods of analysis |
ISO 1634-2:1987
|
Wrought copper and copper alloy plate, sheet and strip Part 2: Technical conditions of delivery for plate and sheet for boilers, pressure vessels and heat-exchangers |
ISO/TR 10495:1997
|
Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336 |
ISO 1190-1:1982
|
Copper and copper alloys Code of designation Part 1: Designation of materials |
ISO 9329-3:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
ISO 4126-1:2013
|
Safety devices for protection against excessive pressure — Part 1: Safety valves |
ISO 13919-1:1996
|
Welding Electron and laser-beam welded joints Guidance on quality levels for imperfections Part 1: Steel |
ISO 683-16:1976
|
Heat-treated steels, alloy steels and free-cutting steels — Part 16: Precipitation hardening stainless steels |
ISO 3834-4:2005
|
Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
ISO 6336-2:2006
|
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
ISO 701:1998
|
International gear notation Symbols for geometrical data |
ISO 1634-1:1987
|
Wrought copper and copper alloy plate, sheet and strip Part 1: Technical conditions of delivery for plate, sheet and strip for general purposes |
ISO/TR 15510:1997
|
Stainless steels Chemical composition |
ISO 10816-2:2009
|
Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
ISO 10437:2003
|
Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
ISO 14732:2013
|
Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
ISO 1083:2004
|
Spheroidal graphite cast irons - Classification |
ISO 7919-2:2009
|
Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 1328-1:2013
|
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
ISO 10814:1996
|
Mechanical vibration Susceptibility and sensitivity of machines to unbalance |
ISO 2604-1:1975
|
Steel products for pressure purposes Quality requirements Part 1: Forgings |
ISO 4885:2017
|
Ferrous materials Heat treatments Vocabulary |
ISO 13852:1996
|
Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
ISO 6892:1998
|
Metallic materials Tensile testing at ambient temperature |
ISO 426-2:1983
|
Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys |
ISO 7919-1:1996
|
Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
ISO 428:1983
|
Wrought copper-aluminium alloys — Chemical composition and forms of wrought products |
ISO 11971:2008
|
Steel and iron castings Visual examination of surface quality |
ISO 14731:2006
|
Welding coordination Tasks and responsibilities |
IEC 60045-1:1991
|
Steam turbines - Part 1: Specifications |
ISO 4951-3:2001
|
High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels |
ISO 9303:1989
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
ISO/TR 13989-1:2000
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
ISO 783:1999
|
Metallic materials Tensile testing at elevated temperature |
ISO 9329-1:1989
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
ISO 6336-3:2006
|
Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 4991:2015
|
Steel castings for pressure purposes |
ISO 10436:1993
|
Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
ISO 9956-7:1995
|
Specification and approval of welding procedures for metallic materials Part 7: Approval by a standard welding procedure for arc welding |
ISO 3058:1998
|
Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers |
ISO 429:1983
|
Wrought copper-nickel alloys Chemical composition and forms of wrought products |
ISO 4126-7:2013
|
Safety devices for protection against excessive pressure — Part 7: Common data |
ISO 197-3:1983
|
Copper and copper alloys Terms and definitions Part 3: Wrought products |
ISO 11496:1993
|
Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections |
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size) |
ISO 5576:1997
|
Non-destructive testing Industrial X-ray and gamma-ray radiology Vocabulary |
ISO/TR 13989-2:2000
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
ISO 4572:1981
|
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance |
ISO 1052:1982
|
Steels for general engineering purposes |
ISO 683-9:1988
|
Heat-treatable steels, alloy steels and free-cutting steels Part 9: Wrought free-cutting steels |
ISO 5173:2009
|
Destructive tests on welds in metallic materials — Bend tests |
ISO 9329-4:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
ISO 5579:2013
|
Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
ISO 9328-3:2011
|
Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized |
ISO/TR 4949:1989
|
Steel names based on letter symbols |
ISO 4126-4:2013
|
Safety devices for protection against excessive pressure — Part 4: Pilot operated safety valves |
ISO 4993:2015
|
Steel and iron castings — Radiographic testing |
ISO 197-2:1983
|
Copper and copper alloys Terms and definitions Part 2: Unwrought products (Refinery shapes) |
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
ISO 1187:1983
|
Special wrought copper alloys — Chemical composition and forms of wrought products |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
ISO/TR 10064-3:1996
|
Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
ISO 9328-5:2011
|
Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled |
ISO/TR 7705:1991
|
Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
ISO 9084:2000
|
Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements |
ISO 581:1980
|
Weldability — Definition |
ISO 4948-1:1982
|
Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
ISO/TR 10064-2:1996
|
Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
ISO 9330-2:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
ISO 9402:1989
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
ISO 3088:1975
|
Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors) |
ISO 13853:1998
|
Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs |
ISO 13664:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
ISO 9330-3:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
ISO 2041:2009
|
Mechanical vibration, shock and condition monitoring Vocabulary |
ISO 6072:2011
|
Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
IEC 60953-1:1990
|
Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines |
ISO 9330-4:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
ISO 9329-2:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
IEC 61515:2016
|
Mineral insulated metal-sheathed thermocouple cables and thermocouples |
ISO 683-18:2014
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
ISO 1925:2001
|
Mechanical vibration Balancing Vocabulary |
ISO 10543:1993
|
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes Full peripheral ultrasonic thickness testing |
ISO 3834-2:2005
|
Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
ISO 683-11:2012
|
Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
ISO 1106-1:1984
|
Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick |
ISO 148:1983
|
Steel — Charpy impact test (V-notch) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 11970:2016
|
Specification and qualification of welding procedures for production welding of steel castings |
ISO 4951-1:2001
|
High yield strength steel bars and sections — Part 1: General delivery requirements |
ISO 9328-2:2011
|
Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
ISO 4200:1991
|
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
ISO 946:1975
|
Grey cast iron Beam unnotched impact test |
ISO 9330-1:1990
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
ISO 4126-2:2003
|
Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
ISO 4987:2010
|
Steel castings Liquid penetrant inspection |
ISO 857-1:1998
|
Welding and allied processes Vocabulary Part 1: Metal welding processes |
ISO 10816-1:1995
|
Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
IEC 61064:1991
|
Acceptance tests for steam turbine speed control systems |
ISO 9328-1:2011
|
Steel flat products for pressure purposes Technical delivery conditions Part 1: General requirements |
ISO 14121:1999
|
Safety of machinery Principles of risk assessment |
ISO 9934-1:2016
|
Non-destructive testing — Magnetic particle testing — Part 1: General principles |
ISO 10474:2013
|
Steel and steel products — Inspection documents |
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
ISO 9956-8:1995
|
Specification and approval of welding procedures for metallic materials Part 8: Approval by a pre-production welding test |
ISO 9477:2015
|
High strength cast steels for general engineering and structural purposes |
IEC 60751:2008
|
Industrial platinum resistance thermometers and platinum temperature sensors |
ISO 6336-1:2006
|
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
ISO 3304:1985
|
Plain end seamless precision steel tubes — Technical conditions for delivery |
ISO 4964:1984
|
Steel Hardness conversions |
ISO 643:2012
|
Steels Micrographic determination of the apparent grain size |
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
ISO 427:1983
|
Wrought copper-tin alloys Chemical composition and forms of wrought products |
ISO 1106-2:1985
|
Recommended practice for radiographic examination of fusion welded joints Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness |
ISO 430:1983
|
Wrought copper-nickel-zinc alloys — Chemical composition and forms of wrought products |
ISO 2954:2012
|
Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
ISO 11484:2009
|
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
IEC 60953-2:1990
|
Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines |
ISO 261:1998
|
ISO general purpose metric screw threads General plan |
ISO 9327-4:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength |
ISO 15609-2:2001
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
ISO 4948-2:1981
|
Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
ISO 10817-1:1998
|
Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
ISO 185:2005
|
Grey cast irons Classification |
ISO 630:1995
|
Structural steels Plates, wide flats, bars, sections and profiles |
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design |
ISO 9330-6:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
ISO 9016:2012
|
Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination |
ISO 5348:1998
|
Mechanical vibration and shock Mechanical mounting of accelerometers |
ISO 5178:2001
|
Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ISO 10441:2007
|
Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
ISO 4951-2:2001
|
High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
ISO 9327-1:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements |
ISO 4136:2012
|
Destructive tests on welds in metallic materials Transverse tensile test |
ISO 4126-5:2013
|
Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) |
ISO 9327-5:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels |
ISO 7919-3:2009
|
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
ISO 4063:2009
|
Welding and allied processes — Nomenclature of processes and reference numbers |
ISO 10825:1995
|
Gears — Wear and damage to gear teeth — Terminology |
ISO 9327-3:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 3: Nickel steels with specified low temperature properties |
ISO 1940-2:1997
|
Mechanical vibration Balance quality requirements of rigid rotors Part 2: Balance errors |
ISO 1106-3:1984
|
Recommended practice for radiographic examination of fusion welded joints Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness |
ISO 7963:2006
|
Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
ISO 3057:1998
|
Non-destructive testing — Metallographic replica techniques of surface examination |
ISO 11537:1998
|
Non-destructive testing Thermal neutron radiographic testing General principles and basic rules |
ISO 9327-2:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
ISO 4126-3:2006
|
Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination |
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO 3755:1991
|
Cast carbon steels for general engineering purposes |
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 3448:1992
|
Industrial liquid lubricants — ISO viscosity classification |
ISO 683-10:1987
|
Heat-treatable steels, alloy steels and free-cutting steels Part 10: Wrought nitriding steels |
ISO/TR 10064-1:2017
|
Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
ISO 683-1:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
ISO 12096:1996
|
Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections |
ISO 4986:2010
|
Steel castings Magnetic particle inspection |
ISO 9956-5:1995
|
Specification and approval of welding procedures for metallic materials Part 5: Approval by using approved welding consumables for arc welding |
ISO 10124:1994
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections |
ISO 3834-3:2005
|
Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
ISO 12706:2009
|
Non-destructive testing Penetrant testing Vocabulary |
ISO 13663:1995
|
Welded steel tubes for pressure purposes Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
ISO 263:1973
|
ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
ISO 1635:1974
|
Wrought copper and copper alloys Round tubes for general purposes Mechanical properties |
ISO 8068:2006
|
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
ISO 9956-6:1995
|
Specification and approval of welding procedures for metallic materials Part 6: Approval related to previous experience |
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
ISO 12095:1994
|
Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
ISO 4990:2015
|
Steel castings — General technical delivery requirements |
ISO 9606-3:1999
|
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
ISO 5577:2017
|
Non-destructive testing — Ultrasonic testing — Vocabulary |
ISO 945:1975
|
Cast iron — Designation of microstructure of graphite |
ISO 9305:1989
|
Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of transverse imperfections |