• ISO 6336-1:2006

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  29-11-2019

    Language(s): 

    Published date:  04-09-2006

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 6336-1:2006 presents the basic principles of, an introduction to, and the general influence factors for, the calculation of the load capacity of spur and helical gears. Together with ISO 6336-2, ISO 6336-3, ISO 6336-5 and ISO 6336-6, it provides a method by which different gear designs can be compared. It is not intended to assure the performance of assembled drive gear systems. It is not intended for use by the general engineering public. Instead, it is intended for use by the experienced gear designer who is capable of selecting reasonable values for the factors in these formulae based on knowledge of similar designs and awareness of the effects of the items discussed.

    The formulae in ISO 6336 are intended to establish a uniformly acceptable method for calculating the pitting resistance and bending strength capacity of cylindrical gears with straight or helical involute teeth.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 60/SC 2
    Development Note Supersedes ISO/DIS 6336-1 (09/2006)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Integral temperature method
    BS EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    04/102158 DC : 0 BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
    15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
    BS ISO 6336-6:2006 CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD
    BS ISO/TR 10495 : 1997 CYLINDRICAL GEARS - CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD - CONDITIONS FOR CYLINDRICAL GEARS IN ACCORDANCE WITH ISO 6336
    DIN EN 81-43:2010-05 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
    04/30126840 DC : DRAFT DEC 2004 BS ISO 6336-6 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD
    BS ISO 6336-3:2006 CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH
    CSA B354.5 : 2007 : R2016 MAST-CLIMBING WORK PLATFORMS
    BS ISO 9084:2000 CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - APPLICATION TO HIGH SPEED GEARS AND GEARS OF SIMILAR REQUIREMENTS
    ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method
    BS ISO/TR 13989-2 : 2000 CALCULATION OF SCUFFING LOAD CAPACITY OF CYLINDRICAL, BEVEL AND HYPOID GEARS - PART 2: INTEGRAL TEMPERATURE METHOD
    UNE-EN 14985:2012 Cranes - Slewing jib cranes
    AGMA ISO 6336-6 : A2008(R2014) CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD
    B354.12-17 Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs)
    DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
    DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
    DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
    UNE-EN 12159:2013 Builders hoists for persons and materials with vertically guided cages
    11/30235014 DC : 0 BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    BS EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
    I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
    UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    ISO 6336-6:2006 Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load
    BS ISO 9083:2001 Calculation of load capacity of spur and helical gears. Application to marine gears
    03/314803 DC : DRAFT SEP 2003 ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING)
    99/702257 DC : DRAFT JAN 1999 PREN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS AND SERVICE LIFTS - PART 7: RACK AND PINION LIFTS
    BS ISO 10972-1 : 1998 CRANES - REQUIREMENTS FOR MECHANISMS - GENERAL
    PD ISO/TR 15144-2:2014 CALCULATION OF MICROPITTING LOAD CAPACITY OF CYLINDRICAL SPUR AND HELICAL GEARS - PART 2: EXAMPLES OF CALCULATION FOR MICROPITTING
    03/301396 DC : 0 EN 14607-3 - SPACE ENGINEERING - MECHANICAL - PART 3: MECHANISMS
    ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
    NF ISO/TR 10495 : 98 FD CYLINDRICAL GEARS - CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD - CONDITIONS FOR CYLINDRICAL GEARS IN ACCORDANCE WITH ISO 6336
    BS EN 13135 : 2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    EN 13135:2013+A1:2018 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    ISO/TR 10495:1997 Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336
    I.S. EN 13135:2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
    UNI EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    DIN EN 12159:2013-03 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
    ISO 19859:2016 Gas turbine applications Requirements for power generation
    BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    I.S. EN 12158-2:2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    EN 15011:2011+A1:2014 CRANES - BRIDGE AND GANTRY CRANES
    I.S. EN 12159:2012 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    I.S. EN 1495:1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    07/30161753 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
    04/30122476 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    02/710617 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    14/30295634 DC : 0 BS EN 16719 - TRANSPORT PLATFORMS
    11/30229148 DC : 0 BS ISO 10300-1 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 1: INTRODUCTION AND GENERAL INFLUENCE FACTORS
    BS ISO 14661 : 2000 THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS
    BS ISO/TR 13989-1 : 2000 CALCULATION OF SCUFFING LOAD CAPACITY OF CYLINDRICAL, BEVEL AND HYPOID GEARS - PART 1: FLASH TEMPERATURE METHOD
    ISO 9083:2001 Calculation of load capacity of spur and helical gears — Application to marine gears
    AGMA 6123 : REV A : 1988 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    ISO 16369:2007 Elevating work platforms Mast-climbing work platforms
    ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
    BS ISO 10300-1:2014 Calculation of load capacity of bevel gears Introduction and general influence factors
    ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
    ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Part 2: Examples of calculation for micropitting
    I.S. EN 16719:2018 TRANSPORT PLATFORMS
    ONORM EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
    UNE-EN 13135:2013 Cranes - Safety - Design - Requirements for equipment
    ISO 10300-1:2014 Calculation of load capacity of bevel gears Part 1: Introduction and general influence factors
    ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
    DIN EN 12158-2:2011-04 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010)
    DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    BS EN 1495 : 1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 1495 : 2009 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 15095 : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    UNI EN 12159 : 2013 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    UNI EN 12158-2 : 2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    BS ISO 9085:2002 Calculation of load capacity of spur and helical gears. Application for industrial gears
    BS ISO 6336-2:2006 CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING)
    09/30183113 DC : 0 BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS
    08/30181434 DC : DRAFT DEC 2008 BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    AGMA 6123 : REV A : 2006 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    03/314804 DC : DRAFT SEP 2003 BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH
    04/30126179 DC : DRAFT DEC 2004 EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    I.S. EN 81-43:2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 MAST-CLIMBING WORK PLATFORMS
    AGMA 6123 : REV A : 1988 : R2000 DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES
    ISO 81400-4:2005 Wind turbines Part 4: Design and specification of gearboxes
    DIN EN 13135:2013-05 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method
    I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
    DIN EN 14985:2012-05 Cranes - Slewing jib cranes
    BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
    ISO 9085:2002 Calculation of load capacity of spur and helical gears Application for industrial gears
    BS EN 12158-2 : 2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    BS EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    UNE-EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
    BS ISO 19859 : 2016 GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
    BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
    UNE-EN 12158-1:2001 Builders hoists for goods. Part 1: Hoists with accessible platforms.
    10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
    UNE-EN 12158-2:2001 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices.
    DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    EN 12158-1:2000+A1:2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
    EN 14985:2012 Cranes - Slewing jib cranes
    EN 12159:2012 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 12158-2:2000+A1:2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
    ISO/TR 13593:1999 Enclosed gear drives for industrial applications
    PD ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method
    BS EN 61400-4:2013 (published 2013-04) Wind turbines Design requirements for wind turbine gea
    DIN 3990-1:1987-12 CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS
    PD ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Introduction and basic principles
    11/30210938 DC : 0 BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES
    BS ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Strength and quality of materials
    BS ISO 81400-4 : 2005 WIND TURBINES - PART 4: DESIGN AND SPECIFICATION OF GEARBOXES
    CSA B354.5:2007 MAST-CLIMBING WORK PLATFORMS
    ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method
    EN 16719 : 2018 TRANSPORT PLATFORMS
    ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles
    DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    BS ISO 13691 : 2001 AMD 14307 PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
    BS EN 12158-1 : 2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 61400-4 : 2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012)
    UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
    ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
    ISO 701:1998 International gear notation Symbols for geometrical data
    ISO 1328-1:2013 Cylindrical gears ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
    ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
    ISO 53:1998 Cylindrical gears for general and heavy engineering Standard basic rack tooth profile
    ISO 6336-6:2006 Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load
    ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules
    ISO/TR 10064-1:2017 Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks
    AGMA 2001 : D FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective