ISO/TS 13732-2:2001
Current
The latest, up-to-date edition.
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
22-03-2001
This part of ISO/TS 13732 presents principles and methods for predicting the thermal sensation and degree of
discomfort for people where parts of the body are in contact with solid surfaces at moderate surface temperatures
(approximately 10 °C to 40 °C).
It deals with the thermal sensation for contacts of the hand, foot and for the sitting position on the floor.
Committee |
ISO/TC 159/SC 5
|
DocumentType |
Technical Specification
|
Pages |
12
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
PD ISO/TS 13732-2:2001 | Identical |
GOST R ISO/TS 13732-2 : 2008 | Identical |
NEN NVN ISO/TS 13732-2 : 2001 | Identical |
10/30196049 DC : 0 | BS ISO 11855-1 - BUILDING ENVIRONMENT DESIGN - DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 1: DEFINITIONS, SYMBOLS AND COMFORT CRITERIA |
10/30191968 DC : 0 | BS ISO 28803 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
BS EN ISO 28803:2012 | Ergonomics of the physical environment. Application of international standards to people with special requirements |
ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
12/30147224 DC : 0 | BS 5970 - THERMAL INSULATION OF PIPEWORK, DUCTWORK, ASSOCIATED EQUIPMENT AND OTHER INDUSTRIAL INSTALLATIONS IN THE TEMPERATURE RANGE OF -100 DEGREES C TO +870 DEGREES C - CODE OF PRACTICE |
ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
I.S. EN 15377-1:2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
UNI EN ISO 28802 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
I.S. EN ISO 13732-1:2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
UNE-EN ISO 11855-1:2016 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012) |
DIN EN ISO 28802:2012-06 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
UNI EN 15377-1 : 2008 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
I.S. EN ISO 11855-1:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 1: DEFINITION, SYMBOLS, AND COMFORT CRITERIA (ISO 11855-1:2012) |
03/315099 DC : DRAFT SEP 2003 | ISO 7730 - ERGONOMICS OF THE THERMAL ENVIRONMENT - ANALYTICAL DETERMINATION AND INTERPRETATION OF THERMAL COMFORT USING CALCULATION OF THE PMV AND PPD INDICES AND LOCAL THERMAL COMFORT |
DIN EN ISO 28803:2012-06 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
S.R. CEN ISO/TR 22411:2011 | ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES |
ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
DIN EN ISO 7730:2006-05 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
I.S. EN ISO 7730:2006 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ANALYTICAL DETERMINATION AND INTERPRETATION OF THERMAL COMFORT USING CALCULATION OF THE PMV AND PPD INDICES AND LOCAL THERMAL COMFORT CRITERIA |
CEN ISO/TR 22411:2011 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) |
BS 5970:2012 | Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100°C to +870°C. Code of practice |
10/30196052 DC : 0 | BS ISO 11855-2 - BUILDING ENVIRONMENT DESIGN - DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
PD CEN ISO/TR 22411:2011 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
I.S. EN ISO 11855-2:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY (ISO 11855-2:2012) |
BS PD ISO/TR 22411 : 2008 | |
BS EN ISO 11855-2:2015 | Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Determination of the design heating and cooling capacity |
I.S. EN ISO 28803:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012) |
BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
DIN EN ISO 13732-1:2008-12 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES (ISO 13732-1:2006) |
ISO 28802:2012 | Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
UNI EN ISO 13732-1 : 2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
UNI EN ISO 7730 : 2006 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ANALYTICAL DETERMINATION AND INTERPRETATION OF THERMAL COMFORT USING CALCULATION OF THE PMV AND PPD INDICES AND LOCAL THERMAL COMFORT CRITERIA |
09/30191965 DC : 0 | BS ISO 28802 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENT OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
BS EN ISO 11855-1:2015 | Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Definition, symbols, and comfort criteria |
04/19987805 DC : 0 | BS ISO 14505-1 - ERGONOMICS OF THE THERMAL ENVIRONMENT - EVALUATION OF THERMAL ENVIRONMENT IN VEHICLES - PART 1: PRINCIPLES AND METHODS FOR ASSESSMENT OF THERMAL STRESS |
08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
BS EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
EN ISO 11855-1:2015 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols, and comfort criteria (ISO 11855-1:2012) |
EN ISO 11855-2:2015 | BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 2: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY (ISO 11855-2:2012) |
ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
ISO 28803:2012 | Ergonomics of the physical environment — Application of International Standards to people with special requirements |
BS EN ISO 7730:2005 | Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
ISO 11855-1:2012 | Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 1: Definition, symbols, and comfort criteria |
ISO/TR 22411:2008 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
ISO 11855-2:2012 | Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 2: Determination of the design heating and cooling capacity |
09/30203113 DC : 0 | BS EN 4666 - AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS |
BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
13/30280751 DC : 0 | BS EN 4666 - AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS |
EN ISO 28802:2012 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
EN ISO 28803:2012 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
EN 15377-1:2008 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity |
03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
04/19984571 DC : DRAFT APR 2004 | BS ISO 13732-1 - ERGONOMICS OF THE THERMAL ENVIRONMENT - METHOD FOR THE ASSESSMENT OF RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
UNI EN ISO 28803 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
UNE-EN ISO 11855-2:2016 | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012) |
I.S. EN ISO 28802:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012) |
07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
BS EN ISO 13732-1:2008 | Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces Hot surfaces |
BS 5422:2009 | Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C |
EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
DIN EN 15377-1:2009-02 | HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY |
TR 4666 : 2016 | AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS |
EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.