MIL C 22750 : F
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COATING, EPOXY, VOC-COMPLIANT
Available format(s)
PDF
Superseded date
31-05-1994
Superseded by
Language(s)
English
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Gives various colors of an epoxy-polyamide coating suitable for use under air pollution regulations. Covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter. Does not limit the suppliable colors, nor does it list all available colors. Coverage includes material, toxicity, composition, pigments, condition in container, storage capability, fineness of grind, corse particles,viscosity, pot life, drying time, surface appearance, and gloss.
| Committee |
FSC 8010
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL A 85670 : 0 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS -3793/A |
| MIL S 10215 : H | SPEEDOMETER, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES,FLEXIBLE SHAFT ASSEMBLY CORES, ADAPTERS AND TRANSMITTERS |
| MIL P 51529 : 0 | PACKAGING OF DECONTAMINATING AGENT |
| MIL STD 001303 : C | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL P 85582 : B | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL W 18723 : D | WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
| MIL-C-22751 Revision D:1971 | COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL D 12468 : C NOTICE 1 | DECONTAMINATING AGENT, STB |
| MIL C 7907 : A | CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES] |
| MIL-C-87936 Revision A:1985 | CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
| GG-S-161 Revision D:1985 | SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION) |
| MIL-A-49273 Base Document:1988 | AMPLIFIER, POWER SUPPLY AM-7152/GRC-213 & ADAPTER KIT, VEHICLE MK-2154/GRC-213 |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| SAE AS6882 | Water Repellent, Window and Windshield, Glass and Plastic |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| MIL-STD-1303 Revision B:1975 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL L 45068 : D | LIGHT, DOME,VEHICULAR, 24 VOLT DIRECT CURRENT |
| MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| NASA MSFC SPEC 250 : 1963 | PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
| MIL-F-51532 Base Document:1987 | FLUID CONTAINER ASSEMBLY, TRAINING |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL P 23971 : B | POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL C 6799 : J | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| MIL-C-22542 Revision B:1987 | CLEANING COMPOUND, HIGH PRESSURE CLEANER, LIQUID |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| SAE AMST23397 | Tapes, Pressure Sensitive Adhesive, for Masking During Paint Stripping Operations |
| MIL-R-81294 Revision D:1990 | REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| MIL-P-6884 Revision F:1973 | PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE |
| MIL-A-29505 Base Document:1966 | Antenna Group, Tacan, OE-273(V)/Urn |
| MIL-R-81835 Base Document:1971 | REMOVER, ORGANIC COATING, HOT TANK TYPE |
| MIL-W-6882 Revision F:1977 | WATER REPELLENT KIT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC |
| MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| SAE AMSR81835 | Remover, Organic Coating, Hot Tank Type |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-C-22751 Revision D:1971 | COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF |
| TT-P-320 Revision D:1977 | PIGMENT, ALUMINUM, POWDER AND PASTE, FOR PAINT |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| QQ-A-250-5 Revision F:1971 | ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.