• There are no items in your cart

MIL-DTL-23928 Revision G:2014

Current

Current

The latest, up-to-date edition.

PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE

Available format(s)

PDF

€17.95
Excluding VAT

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Describes high-impact (H.I.) shockproof and vibration proof, bulkhead mounted electrical power distribution and transfer panels using ALB, NLB, AQB, and NQB circuit breakers for feeder and branch circuit protection and control for alternating current (ac) and direct current (dc) application on naval ships.

Committee
FSC 5925
DevelopmentNote
Supersedes MIL P 23928 (D) (04/2001)
DocumentType
Standard
Pages
36
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

MIL-DTL-23928-8 Revision D:2017 PANEL, ELECTRICAL, MANUAL TRANSFER FOR DOUBLE AQB-A252, AQB-A253, NQB-A250, CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSE AND WATERTIGHT
MIL-DTL-23928-5 Revision D:2017 PANEL, ELECTRICAL, MANUAL TRANSFER FOR DOUBLE AQB-A102, AQB-A103, NQB-A101 CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT
MIL-DTL-23928-1 Revision F:2017 PANEL, ELECTRICAL, 125 VOLTS, POWER DISTRIBUTION FOR ALB-1 AND NLB-1 CIRCUIT BREAKERS, 4-24 CIRCUITS, DRIPPROOF, THREE PHASE FEED, SINGLE AND THREE PHASE LOADS, TOTALLY ENCLOSED AND WATERTIGHT
MIL-DTL-23928-3 Revision D:2017 PANEL, ELECTRICAL, POWER DISTRIBUTION FOR SINGLE AQB-A101, AQB-A102, AQB-A103, NQB-A101 CIRCUIT BREAKER DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT
MIL-DTL-23928-4 Revision E:2013 Panel, Electrical, Power Distribution for Double AQB-A101, AQB-A102, AQB-A103 and NQB-A101, NQB-A250 Circuit Breakers, 2-12 Circuits, with and without Manual Transfer, Dripproof, Totally Enclosed and Watertight
MIL-DTL-23928-2 Revision E:2017 PANEL, ELECTRICAL, VOLTS, POWER DISTRIBUTION FOR AQB-A50, AQB-A51 AND NQB-A50 CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT
MIL-DTL-23928-7 Revision D:2017 PANEL, ELECTRICAL, POWER DISTRIBUTION FOR DOUBLE AQB-A250, AQB-A252, AQB-A253, NQB-A250 CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
MIL-HDBK-2036 Base Document:1999 PREPARATION OF ELECTRONIC EQUIPMENT SPECIFICATIONS
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
MIL-DTL-24643-15 Revision F:2009 Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSDSGU
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-C-17588 Revision E:1985 CIRCUIT BREAKERS (AUTOMATIC - ALB) AND SWITCH, TOGGLE (CIRCUIT BREAKER, NON AUTOMATIC - NIB) AIR, INSULATED HOUSING, 125 VOLTS AND BELOW AC OR DC (NAVAL SHIPBOARD USE)
MIL-DTL-1222 Revision J:2000 STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
MIL-I-24768-1 Base Document:1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (GME)
MIL-DTL-3661 Revision D:2013 Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for
MIL-I-24768-6 Base Document:1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-MAT, POLYESTER-RESIN (GPO N-3)
MIL-DTL-17361 Revision G:2006 CIRCUIT BREAKER TYPES AQB/NQB, AIR, ELECTRIC, LOW VOLTAGE, INSULATED HOUSING (SHIPBOARD USE), GENERAL SPECIFICATION FOR
SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
NAVSEA S9074 AR GIB 010/278 : 0 REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS
MIL S 901 : D SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR
MIL-STD-108 Revision E:1966 DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT
ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
MIL-DTL-24643 Revision C:2009 Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for
MIL-P-15024-5 Base Document:1971 PLATE, IDENTIFICATION
MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
MIL-PRF-16173 Revision E:1993 CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
MIL-DTL-24643-16 Revision F:2009 Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSTSGU
A-A-59781 Base Document:2005 LIGHT EMITTING DIODES FOR USE AS INDICATOR LIGHTS
MIL-I-24768 Base Document:1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR
MIL-PRF-900 Revision F:1973 RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
MIL-STD-167-1 Revision A:2005 MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED)
NAVSEA S9074 AQ GIB 010/248 : 0 REQUIREMENTS FOR WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.