MIL-DTL-23971 Revision E:2017
Current
Current
The latest, up-to-date edition.
POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
Available format(s)
PDF
Language(s)
English
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the general requirements for power dividers, power combiners, and power divider/combiners.
| Committee |
FSC 5985
|
| DevelopmentNote |
Supersedes MIL P 23971 (B) (09/2001)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-DTL-23971-9 Revision B:2012 | POWER DIVIDER, N-WAY, 0 DEGREES, SMA CONNECTORS |
| DSCC 89112 : B | POWER DIVIDER, 4-WAY, 0 DEGREE, CONNECTORS |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-23971-16 Revision B:2015 | POWER DIVIDER/COMBINERS, N-WAY, 0 DEGREES, SMA CONNECTORS |
| MIL-DTL-23971-5 Revision D:2013 | POWER DIVIDERS, N-WAY, O DEGREES, FLAT PACK |
| MIL-DTL-23971-15 Revision B:2015 | POWER DIVIDER/COMBINERS, N-WAY, 0 DEGREES, RECTANGULAR, PC PINS |
| MIL-DTL-23971-14 Revision B:2013 | Power Divider/Combiners, N-Way, 0 Degrees, Flat Pack |
| MIL-DTL-23971-17 Revision C:2017 | POWER DIVIDER/COMBINERS, N-WAY, 0 DEGREES, TNC CONNECTORS |
| MIL-DTL-23971-6 Revision D:2017 | POWER DIVIDER/COMBINERS, N-WAY, 0 DEGREES, TO-5 |
| MIL-DTL-23971-2 Revision D:2014 | Power Dividers, 4 Port Quadrature, SMA Connectors |
| MIL-DTL-23971-1 Revision C:2017 | POWER DIVIDERS, 4 PORT QUADRATURE, SOLDER TERMINALS |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| SAE AMS2404G | Plating, Electroless Nickel |
| SAE AMS 2422 : 2014 | PLATING, GOLD |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL-STD-202-109 Base Document:2015 | Method 109, Explosion |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-PRF-23586 Revision F:1996 | Sealing Compound (With Accelerator), Silicone Rubber, Electrical |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| ASTM A 693 : 2016 : REDLINE | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMSI23011C | Iron-Nickel Alloys for Sealing to Glasses and Ceramic |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
| MIL-STD-202-215 Base Document:2015 | METHOD 215, RESISTANCE TO SOLVENTS |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| MIL-STD-202-104 Base Document:2015 | Method 104, Immersion |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| SAE AMS QQ A 250 B : 2012 | ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-STD-202-110 Base Document:2015 | Method 110, Sand and Dust |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| SAE AMS QQ A 200 : 2004 | ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-DTL-85 Revision K:2011 | WAVEGUIDES, RIGID, RECTANGULAR - GENERAL SPECIFICATION FOR |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-112 Base Document:2015 | METHOD 112, SEAL |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.