MIL P 23377 : G
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRIMER COATING, EPOXY, HIGH SOLIDS
Available format(s)
PDF
Language(s)
English
Publisher
Superseded date
30-09-1994
Superseded by
€16.67
Excluding VAT
Prerequisites for primer coatings, epoxy, chemical and solvent-resistant, for spray application. Coverage includes classification, applicable documents, qualification, material, toxicity, composition, pigment, volatile content, thinner, component requirements, color, odor, viscosity, pot life, total solids, storage stability, accelerated storage stability, drying time, lifting, solvent retention, and flexibility.
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-E-16400 Revision H:1987 | Electronic, Interior Communication and Navigation Equipment, Naval Ship and Shore: General Specification for (S/S by MIL-STD-2036) |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| MIL-C-13766 Revision C:1983 | Conversion Kit, Barge, Deck Enclosure Design 7006, for Designs 213A and 7005 (No S/S Document) |
| MIL-T-22085 Revision E:1994 | TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION AND SEALING (S/S BY SAE-AMS-T-22085) |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MIL-L-52056 Revision D:1984 | Light, Signal, Surveying, Self Illuminated, with Carrying Case, for Use with Range Pole (No S/S Document) |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| SAE AMS3077 | COMPOUND, CORROSION PREVENTIVE Soft Film, Thixotropic, Cold Application- |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE (S/S BY SAE-AMS3277, SEE NOTICE 1 FOR ADDITIONAL INFORMATION) |
| MIL-C-8605 Revision B:1990 | Cap; Pressure Fuel Servicing |
| MIL-L-46159 Revision A:1976 | Lacquer, Acrylic, Low Reflective (S/S by MIL-C-46168 or MIL-c-53039 now MIL-DTL-53039) |
| MIL-STD-193 Revision L:1991 | Painting, Procedures and Marking for Vehicles, Construction Equipment, Material Handling Equipment, and Spare Parts |
| MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
| MIL P 85582 : B | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-C-83286 Revision B:1973 | Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications (S/S by MIL-C-85285 S/S by MIL-PRF-85285) |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING (S/S BY A-A-52023) |
| MIL W 18723 : D | WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
| MIL-F-22735 Revision C:1980 | Film, Elastomeric, Fluorescent, for Weapons System (ASG) (No S/S Document) |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH-STRUCTURAL, 1,250 GPM, 4 X 2 OR 4 X 4 CHASSIS) (NO S/S DOCUMENT) |
| MIL-PRF-87978 Revision A:1996 | Remover, Paint, Epoxy and Polyurethane Systems, Tank Type, Ambient Temperature, for Aircraft Wheels and Landing Gear Components (No S/S Document) |
| TT-R-2918 Revision A:2001 | Remover, Paint, No Hazardous Air Pollutants (HAPS) |
| MIL-S-12158 Revision D:1988 | SEALING COMPOUND, NON-CURING, POLYBUTENE (S/S BY A-A-52495) |
| MIL-S-64052 Base Document:1988 | Spray Gun, Paint, Heavy Duty Pressure Feed (S/S by A-A-50310) |
| MIL R 87978 : LATEST | REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE: AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS |
| MIL-T-83303 Revision C:1988 | TRUCK, FIREFIGHTING, AIRFIELD RAMP, 4X4, A/S32P-20, TWIN AGENT, SKID MOUNTED (NO S/S DOCUMENT) |
| MIL-A-83477 Revision A:1976 | Air Conditioner, A/M32C-18 Trailer Mounted, Diesel Engine Driven (No S/S Document) |
| MIL-DTL-25027 Revision H:1997 | Nut, Self-Locking 250 Degree F, 450 Degree F, and 800 Degree F (S/S by NASM-25027) |
| MIL-T-83965 Revision B:1990 | TRUCK, FIRE-RESCUE, A/S32P-10 FORCIBLE ENTRY (NO S/S DOCUMENT) |
| MIL-G-81559 Revision C:1984 | Gyroscope Assemblies and Attitude and Directional Reference Instruments for Aircraft, Packaging of |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (S/S BY SAE-AMS-S-8802) |
| MIL-B-13831 Revision J:1985 | Boat, Reconnaissance, Pneumatic: 3-Man (S/S by MIL-B-53067) |
| MIL-C-81945 Revision B:1989 | Coating Compounds, Weapon Insulation, Intumescent |
| MIL-R-38435 Revision B:1968 | RECORDING SET, SIGNAL DATA A/A24U-6 (NO S/S DOCUMENT) |
| MIL-P-21415 Revision C:1973 | PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE (NO S/S DOCUMENT) |
| MIL-E-50796 Base Document:1973 | Expanding Shielded Mild Detonating Cord Assembly |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES (S/S BY MIL-HDBK-1250) |
| MIL C 7907 : A | CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES] |
| MIL-C-87936 Revision A:1985 | Cleaning Compounds, Aircraft Exterior Surfaces, Water Dilutable (S/S by MIL-C-87937) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-A-49273 Base Document:1988 | Amplifier, Power Supply AM-7152/GRC-213 and Adapter Kit, Vehicle MK-2154/GRC-213 |
| MIL-HDBK-1250 Revision A:1995 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies (S/S by AS12500) |
| MIL F 1224 : D | FITTINGS, TUBE, BRASS OR BRONZE, 45 DEGREE FLARED |
| MIL-C-43616 Revision C:1981 | Cleaning Compounds, Aircraft Surface (S/S by A-A-59921) |
| SAE AMS1374A | Remover, Polyurethane/Epoxy Paint Alkaline, Hot-Tank Type |
| MIL-STD-1516 Revision B:1990 | Unified Code for Coating and Finishes for DOD Materiel (No S/S Document) |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| SAE AMSC5541A | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMS3263A | Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant with Intermittent Use to 400°CF (204°CC) |
| MIL-F-7179 Revision G:1993 | Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (S/S by MIL-STD-7179) |
| SAE ARP1675 | Structural Weldbonding of Aluminum Structures |
| MIL-C-22751 Revision D:1971 | Coating System, Epoxy-Polyamide, Chemical and Solvent Resistant: Process for Application of (No S/S Document) |
| MIL-C-83873 Revision A:1993 | Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (Age) (S/S by MIL-C-87937) |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL-V-8610 Revision B:1984 | Valve, Fuel Shutoff Solenoid Operated, 28 Volt DC |
| MIL-A-62473 Revision B:1992 | Armor: Aluminum-Aramid, Laminate Composite |
| MIL-STD-1303 Revision B:1975 | Painting of Naval Ordnance Equipment (No S/S Document) |
| MIL-A-83216 Revision B:1976 | Air Conditioner A/E32C-39 (No S/S Document) |
| MIL-C-85528 Base Document:1983 | CONNECTOR, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, GENERAL SPECIFICATION FOR |
| MIL-C-83821 Base Document:1990 | Crane, Wheel Mounted, Crash, Rough Terrain, Hydraulic Full Revolving, 4X4, DED, Fighter Type Aircraft |
| DOD STD 2138 : LATEST | METAL SPRAYED COATING SYSTEMS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS (METRIC) |
| MIL-C-81907 Base Document:1972 | Coating System, Polyurethane, Aliphatic, Weather Resistant: Process for Application of (No S/S Document) |
| MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
| MIL-PRF-83936 Revision C:1996 | Remover, Paint, Tank Type; for Aircraft Wheels, Landing Gear Components, and Other Aircraft and Support Equipment |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL-C-8507 Revision D:1963 | Coating, Wash Primer (Pretreatment) for Metals, Application of (for Aeronautical Use) |
| MIL-C-5584 Revision D:1988 | Container, Shipping and Storage, Metal Reusable (No S/S Document) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| MIL-H-53062 Base Document:1986 | Hose Assembly, Rubber, Lightweight, Collapsible 6 Inch for POL Service (S/S MIL-H-0053073) |
| SAE AMS3259B | Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C) |
| MIL-C-13720 Revision B:1983 | Clamp, Beam, Cargo Lashing (No S/S Document) |
| NASA MSFC SPEC 250 : 1963 | PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-S-83315 Base Document:1971 | SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY (NO S/S DOCUMENT) |
| MIL S 9479 : C | |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MIL-S-6551 Revision A:1981 | Seat, Crew, Downward Ejection, Aircraft |
| MIL-L-19538 Revision C:1970 | Lacquer, Acrylic Nitrocellulose, Camouflage (for Aircraft Use) (S/S by MIL-L-81352) |
| MIL-M-81957 Revision B:1990 | Mobile Test Facility, Gas Turbine Engine Test Systems General Specification for |
| MIL-STD-2098 Base Document:1980 | Ordnance Preparation and Application of Intumescent Sheet, Type III |
| MIL-C-81946 Base Document:1973 | Coating System, Thermal Insulation, Intumescent (No S/S Document) |
| MIL R 83936 : B | REMOVER, PAINT, TANK TYPE, FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS, AND OTHER AIRCRAFT AND AGE COMPONENTS |
| MIL-C-38334 Revision A:1971 | Corrosion Removing Compound, Prepaint, for Aircraft Aluminum Surfaces (S/S by SAE-AMS1640) |
| SAE AMS1659 | COATING, SOIL BARRIER Semi-Permanent |
| MIL-STD-1761 Base Document:1979 | FASTENER RECESS TEST, METHOD FOR DAMAGE TOLERANCE EVALUATION (NO S/S DOCUMENT) |
| P-C-444 Revision B:1983 | Cleaning Compound, Solvent Soluble, Grease Emulsifying |
| MIL C 6799 : J | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| MIL-C-22542 Revision B:1987 | Cleaning Compound, High Pressure Cleaner, Liquid (S/S by SAE-AMS-C-22542) |
| MIL-P-85089 Revision A:1990 | PAINTING OF AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS) |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL-S-48405 Base Document:1973 | Shielded and Confined Mild Detonating Cord Assemblies |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL T 52150 : E NOTICE 1 | TRESTLE ASSEMBLY, UNIVERSAL TRANSOM, 60 TON, FOR FLOATING AND FIXED BRIDGES |
| SAE AMST22085 | Tapes, Pressure-Sensitive, Adhesive, Preservation and Sealing |
| SAE AMSA8625A | Anodic Coatings for Aluminum and Aluminum Alloys |
| SAE AMST23397 | Tapes, Pressure Sensitive Adhesive, for Masking During Paint Stripping Operations |
| MIL C 85285 : C | |
| NASA PRC 4002 : 2010 | PROCESS SPECIFICATION FOR THE APPLICATION OF THERMAL AND CORROSION CONTROL PAINTS AND COATINGS |
| MIL-C-81947 Revision A:1975 | Coating Compound, Thermal Insulation, Three-Component, Intumescent (No S/S Document) |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| MIL-T-81838 Base Document:1971 | Tank, Fuel, Aircraft, Auxiliary External 300 Gallon, Type AERO-1D |
| MIL PRF 62478 : A | COUPLER, OPTICAL |
| MIL L 24223 : C | LOUDSPEAKER, SHIPBOARD ANNOUNCING SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-R-81903 Revision A:1977 | Remover, Acid Activated, for Amine-Cured Epoxy Coating Systems |
| MIL-C-42066 Revision A:2000 | Carrier, Litter, Wheeled (No S/S Document) |
| MIL-R-81835 Base Document:1971 | REMOVER, ORGANIC COATING, HOT TANK TYPE (S/S BY SAE-AMS-R-81835) |
| MIL-T-23142 Revision B:1977 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION (S/S BY A-A-59298) |
| MIL-HDBK-1568 Base Document:1996 | Material and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems (S/S by MIL-STD-1568) |
| SAE ARP4898 | STANDS, SHIPPING AND STORAGE, AIRCRAFT ENGINES, REUSABLE |
| MIL-C-11071 Revision D:1983 | Cleaning Machine, Fuel Can, Drum (No S/S Document) |
| MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS (S/S BY SAE-AMS-T-23397) |
| MIL C 85570 : B (1) | CLEANING COMPOUND, AIRCRAFT, EXTERIOR |
| MIL-C-85049-94 Base Document:1993 | Connector Accessories, Electrical, Mounting Device Flange Type, Full Mounting Perimeter Device, Type I (Heavy Duty)(S/S by SAE-AS 85049/94) |
| MIL-W-5013 Revision L:1991 | Wheel and Brake Assemblies, Aircraft General Specification For |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| SAE AMSR81835 | Remover, Organic Coating, Hot Tank Type |
| FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
| QQ-A-250-12 Revision F:1982 | Aluminum Alloy 7075, Plate and Sheet (See Notice 3 for Replacement Information) |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| MIL C 85285 : C | |
| ASTM E 275 : 2008 | Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| MIL-C-8514 Revision C:1967 | Coating Compound, Metal Retreatment, Resin-Acid (ASG) |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL-C-38334 Revision A:1971 | Corrosion Removing Compound, Prepaint, for Aircraft Aluminum Surfaces (S/S by SAE-AMS1640) |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| QQ-A-250-5 Revision F:1971 | Aluminum Alloy Alclad 2024, Plate and Sheet (See Notice 5 for Replacement Information) |
| FED-STD-141 Revision D:2001 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| MIL-C-83286 Revision B:1973 | Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications (S/S by MIL-C-85285 S/S by MIL-PRF-85285) |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER, AND RELATED MATERIALS: PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.